GE Monogram ZET1SMSS User instructions

OVERALL DIMENSIONS
Dimensions in parentheses
are in centimeters unless
otherwise noted. Actual
product dimensions may
vary due to manufacturing
tolerances.
* Additional space will be needed for flush installation.
Product Specification Created 6/14
GE Monogram®30" Built-In Single Oven
SPECIFICATIONS
Overall Width 29 3/4" (75.6 cm)
Overall Height 28 5/16" (71.9 cm)
Overall Depth
Including Handle 26 5/16" (66.8 cm)
Oven Door Clearance 21" (53.3 cm) Min
Overall Oven
Interior Capacity 4.4 cu. ft. (124.6 l)
Oven Interior Dimensions
(W x H x D)
24" x 17 1/2" x 18 1/4"
(61.0 cm x 44.5 cm x 46.4 cm)
Minimum Cabinet Width* 30" (76.2 cm)
Minimum Cabinet Depth* 24" (61.0 cm)
Minimum Base Support 200 lbs (90 kg)
Cutout Width* 28 1/2" (72.4 cm) Min
28 5/8" (72.7 cm) Max
Cutout Height* 27 1/4" (69.2 cm) Min
27 5/16" (69.4 cm) Max
Cutout Depth* 23 1/2" (59.7 cm) Min
Volts/Hertz/Amps 240/208 V AC, 60 Hz, 20A
Conduit Length 48", 72" available special
order: WB18T10398
Electrical Rating 3.9 kW at 208V
4.3 kW at 240V
Shipping Weight 195 lbs (89.5 kg)
ZET1SMSS
22 9/16"
(57.3)
5 1/2"
(14.0)
7 9/16"
(19.2)
9 7/8"
(25.1)
29 3/4" (75.6)
FRONT VIEW (SHOWING CUTOUT OVERLAP)
7/16"
(1.1)
5/8"
(1.6)
ZET1SM
1" (2.5)
28 5/16"
(71.9)
2 7/8" (7.3)
8 1/8" (20.6)
24 5/16" (61.8)
10 13/16"
(27.5)
12 1/2"
(31.8)
5 3/8"
(13.7)
3 7/8"
(9.8)
SIDE VIEW
5/8"
(1.6) 9 7/8"
(25.1)
28 1/2" (72.4)
10 13/16"
(27.5)
21"
(53.3)
min
26 5/16"
(66.8)
2"
(5.1)
TOP VIEW
OPEN OVEN DOOR
SHOWING DOOR CLEARANCE
28 1/2" (72.4)
min cutout width
27 1/4"
(69.2) min
cutout height
ATTENTION ELECTRICIAN:
A 240/208V, 60Hz, 20 Amp circuit is required. An
inidividual properly grounded branch circuit or
circuit breaker is required. Hardware junction box
is required for built-in product.

NOTES
WALL INSTALLATION
ABased on a user height
of 5' 6" to 5' 10"
BJunction box location
(May also be located
in adjacent cabinet.)
CPlatform must be
able to support 200 lbs
(90 kg)
DCabinet surfaces must
be an appearance
finished surface for
flush installation.
ECleats may be visible
and should be finished
to match cabinetry.
FMaximum toe kick
height of 4" when
installed beneath a
certified cooktop.
GE Monogram®30" Built-In Single Oven
TOP VIEW
30 1/4" (76.8) flush inset width
with 1/4" (0.6) reveals
1"
(2.5)
2 1/2"
(6.4)
Side cleats
depth
STANDARD
INSTALLATION
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
FLUSH INSET
INSTALLATION
Side cleat
Top cleat
Bottom cleat
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2"(72.4)
cutout width
7/8"
(2.2)
Side cleats
3/4"
(1.9)
Top cleat
ELEC.
9/16"(1.4)
Bottom cleat
(Extends full depth of cabinet)
FLUSH INSET INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
FRONT VIEW
Dimension varies
ELEC.
3/4"
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2"
(1.9)
min cutout width
(72.4)
STANDARD
INSTALLATION
23 1/2"
(59.7) min cutout depth
27 1/4"
(69.2)
FLUSH INSET
INSTALLATION
24 1/2"
(62.2)
cutout depth
24 1/2" (62.2)
cutout depth
23 1/2" (59.7)
min cutout depth
ZET1SM
28 9/16"
(72.5)
Flush inset
height
with 1/8"
(0.3) reveals
TOP VIEW
30 1/4" (76.8) flush inset width
with 1/4" (0.6) reveals
1"
(2.5)
2 1/2"
(6.4)
Side cleats
depth
STANDARD
INSTALLATION
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
FLUSH INSET
INSTALLATION
Side cleat
Top cleat
Bottom cleat
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2"(72.4)
cutout width
7/8"
(2.2)
Side cleats
3/4"
(1.9)
Top cleat
ELEC.
9/16"(1.4)
Bottom cleat
(Extends full depth of cabinet)
FLUSH INSET INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
FRONT VIEW
Dimension varies
ELEC.
3/4"
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2"
(1.9)
min cutout width
(72.4)
STANDARD
INSTALLATION
23 1/2"
(59.7) min cutout depth
27 1/4"
(69.2)
FLUSH INSET
INSTALLATION
24 1/2"
(62.2)
cutout depth
24 1/2" (62.2)
cutout depth
23 1/2" (59.7)
min cutout depth
ZET1SM
28 9/16"
(72.5)
Flush inset
height
with 1/8"
(0.3) reveals
UNDERCOUNTER INSTALLATION
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
ZET1SMSS
Allow 1/4" (0.64) clearances
from side edges of oven door.
CC
C
E
B
B
D
A
F
Product Specification Created 6/14

NOTES
GE Monogram®30" Built-In Single Oven
INSTALLATION WITH ADVANTIUM
AND WARMING DRAWER
SIDE BY SIDE INSTALLATION
ADimensions per
Advantium or
Microwave Oven
requirement
BDimension per Warming
Drawer requirement
CNote this oven is only
approved to be installed
under specific models as
labeled on this unit.
DSupport platform made
of 3/4" (1.9 cm) wood
is required. Must be
capable of supporting
200 lbs (90 kg). Support
Platform base to be
same height as toe kick.
EJunction box location
for wall oven. (May
also be located in
adjacent cabinet).
FGas regulator and
electric connections
for cooktops must be
located in an adjacent
accessible location to
the right
GTop and/or side fillers
may be necessary if unit
is positioned between
existing cabinets. Be
sure they are attached
securely, since they will
anchor the oven in the
cabinet.
HFor flush oven
installations, the
cooktop cutout must be
set back 2 1/2" (6.4) plus
the cleat setback.
IDimension varies based
on model.
example:
ZGU385 5 1/2" (14.0)
(from wall)
ZGU384 4 5/16" (11.0)
(from wall)
JDimension varies based
on model.
example:
ZGU385 0"
(centerline)
ZGU384 12 1/16" (30.6)
(centerline)
2" (5.1) min
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
ELEC. ELEC.
2" (5.1)
min
2" (5.1)
min
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC. ELEC.
GAS
wall oven
ELEC.
Wall oven
3/4" thick platform
required
5"
(12.7)
To centerline
of gas pipe
2 7/8"
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
(7.4) max
C
L
GAS
cooktop
4 3/4"
(12.1) max
ZET1SM
B
A
CI H
J
E
G
F
D
2" (5.1) min
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
ELEC. ELEC.
2" (5.1)
min
2" (5.1)
min
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC. ELEC.
GAS
wall oven
ELEC.
Wall oven
3/4" thick platform
required
5"
(12.7)
To centerline
of gas pipe
2 7/8"
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
(7.4) max
C
L
GAS
cooktop
4 3/4"
(12.1) max
ZET1SM
B
A
CI H
J
E
G
F
D
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
UNDER COOKTOP INSTALLATION
ZET1SMSS
Product Specification Created 6/14

FEATURES AND BENEFITS
R
Electronic Controls - As elegant as they are
ergonomic
Halogen Light Columns - On the oven walls,
provide brilliant task lighting for each rack
position
Exclusive Self Cleaning, Full-Extension Oven
Racks - Glide in and out smoothly on stainless
steel ball bearings, and are designed to be left in
the oven during the self-clean cycle
4.4 Cu. Ft. Capacity - Easily accomodates even
the largest meals
True Hidden Bake Element - Concealed beneath
the oven floor, allowing additional capacity and
improved cleanability
Reverse-Air Convection System - Uses an
innovative fan that reverses direction for optimal
air and heat circulation, providing even cooking
and multi-rack baking capability
Six-Element Design - Two bake, two broil and
two convection elements provide precise cooking
control, with fast preheating
208V Performance Compensation - Utilizes the
six-element design to boost power in reduced
voltage installations
Signature Tubular Handles - Are smooth, sleek
and easy to grasp
Hand-Finished Edges - Reflect the meticulous
quality and cratsmanship for which Monogram
products are renowned
Two Broil Elements with Reflector Shield - Offer
intense, dual-zone broiling
GE Monogram®30" Built-In Single Oven ZET1SMSS
Product Specification Created 6/14