GE Appliances 30 User manual

Owner’s
Manual
30"Built-In
Bottom-Freezer
2-Drawer
Refrigerator
monogram.com
Réfrigérateurs
Congélateur inférieur
Refrigeradores
Congeladorinferior
Manuel d’utilisation
Owner’s Manual
Manual del propietario
La section française commence à la page 25
La sección en español empieza en la página 49
See content section page 2

Consumer Information
30" Bottom-Freezer
2
Contents
Consumer Services
Important Phone Numbers . . . . . . . . . . . . . . . . . . . . .23
Model and Serial Numbers . . . . . . . . . . . . . . . . . . . . . . .3
Performance Data Sheet . . . . . . . . . . . . . . . . . . . . . . .19
Problem Solver . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 18
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5
State of California Water
Treatment Device Certificate . . . . . . . . . . . . . . . . . . .20
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BackCover
Care and Cleaning
Cleaning—Outside and Inside . . . . . . . . . . . . . . . . . .14
Light Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . 15
Vacation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Operating Instructions
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Automatic Icemaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Customizable Drawer . . . . . . . . . . . . . . . . . . . . . . . . . .11
Door Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
External Moisture Control . . . . . . . . . . . . . . . . . . . . . .12
LEDDisplay Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Sabbath Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Temperature Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Vegetable Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Water Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Wine/Beverage Rack . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Preparation
Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Before
using
your
refrigerator
Read this manual carefully. It is intended
to help you operate and maintain your new
refrigerator properly.
Keep it handy for answers to your questions.
If you don’t understand something or
need more help, there is a list of toll-free
consumer service numbers included in
the back section of this manual.
OR
Visit our Website at: monogram.com
In Canada: monogram.ca
Introduction
Your new Monogram Refrigerator makes an eloquent statement of style, convenience and kitchen
planning flexibility. Whether you chose it for its purity of design or the assiduous details, you will find
that your Monogram Refrigerator’s superior blend of form and function will delight you for years to
come.
The information on the following pages will help you operate and maintain your Refrigerator properly.
If you have any other questions, visit our Website at: monogram.com In Canada: monogram.ca

3
Write
down the
model &
serial
numbers
You’ll see them on a label inside the fresh food
compartment, below the vegetable pan. Before sending in this card, please write these numbers here:
Model Number
Serial Number
Usethesenumbersinanycorrespondenceor
servicecallsconcerningyourrefrigerator.
If you
received a
damaged
refrigerator
The warranty does not cover damage caused
after delivery. Immediately contact the dealer (or builder) that sold you the refrigerator.
Save time
& money
Before you request service, check the Problem
Solver in the back of this manual. It lists causes of minor operating problems that you can correct yourself.
If you
need
service
To obtain service, see the Consumer Services
page in the back of this manual.
We’re proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are steps to
follow for further help.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all
the details—including your phone number—to:
Manager, Customer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
In Canada:
Director, Consumer Relations
MC Commercial Inc
Suite 310, 1 Factory Lane
Moncton, N.B.
E1C 9M3
Consumer Information
30" Bottom-Freezer

4
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
WARNING–Whenusingthis
appliance, alwaysexercisebasicsafetyprecautions,
including the following:
• Use this appliance only for its intended purpose
asdescribedinthisOwner’sManual.
• This refrigerator must be properly installed in
accordance with the Installation Instructions
before it is used.
• Do not allow children to climb, stand or hang
on the door bins in the refrigerator. They could
damagetherefrigeratorandseriouslyinjure
themselves.
• Do not touch the cold surfaces in the freezer
compartment when hands are damp or wet.
Skinmayadheretotheseextremelycoldsurfaces.
• Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
• Your freezer has an automatic icemaker
in the freezer drawer—avoidcontactwiththe
movingpartsoftheejectormechanism,orwith
theheatingelementlocatedonthebottom
oftheicemaker.Donotplacefingersorhands on
theautomaticicemaking mechanism whilethe
freezeris plugged in.
• Turn off the circuit breaker to disconnect power
when cleaning or making repairs. Repairsshould
bemade by a qualified servicetechnician.
• Do not try to replace a burned-out LED light.
Anauthorized technicianwill need to replace the
LEDlights.
• Do not refreeze frozen foods which have thawed
completely.
DANGER: RISK OF CHILD ENTRAPMENT
Childentrapment and suffocation arenot
problemsof the past. Junked orabandoned
refrigerators arestilldangerous…even if they willsit
for“just a few days.”If youare getting ridofyour old
refrigerator, pleasefollowthese instructions to help
preventaccidents.
Before You Throw Away Your Old Refrigerator:
•Takeoffthe door/drawers.
•Leavethe shelves in placesothat children may
noteasily climbinside.
REFRIGERANTS
All refrigeration products contain refrigerants, which
under federal law must be removed prior
to product disposal. If you are getting rid of an old
refrigeration product, check with the company
handling the disposal about what to do.
WARNING–R600a Refrigerant
Warning: This appliance contains isobutane refrigerant,
R600a, a natural gas with high environmental
compatibility. However it is also combustible. Please
adhere to the warnings below:
1) Whenhandling,installing and operating theappliance,
careshould be taken to avoid
damagetothe refrigerant tubing.
2) Servicingshall be performed byfactory-authorized
servicepersonnel and component partsshallbe
replacedwith manufacturer-authorized replacement
components.
3)Refrigeration products contain refrigerants, which
under federal law must be removed prior
to product disposal.
4) Keepventilation openings inthe applianceenclosures or
inthe built-instructureclear of obstruction.
5) Donot use mechanical devicesorother means
to accelerate the defrosting process.
6) Donot damage refrigerant circuit.
7) Donot use electrical appliances inside the
foodstoragecompartment of theappliance.

5
IMPORTANT SAFETY INSTRUCTIONS
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances,
cut or remove the third (ground) prong
from the power cord. For personal safety,
this appliance must be properly grounded.
The power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall outlet
to minimize the possibility of electric shock
hazard from this appliance.
Have the wall outlet and circuit checked by
a qualified electrician to make sure the outlet
is properly grounded.
Where a standard 2-prong wall outlet is
encountered, it is your personal responsibility
and obligation to have it replaced with a properly
grounded 3-prong wall outlet.
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matches the rating plate.
DO NOT USE AN ADAPTER PLUG TO CONNECT
THE REFRIGERATOR TO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH
THIS APPLIANCE.
This provides the best performance and also
prevents overloading house wiring circuits, which
could cause a fire hazard from overheated wires.
Never unplug your refrigerator by pulling on
the power cord. Always grip plug firmly and pull
straight out from the outlet.
Repair or replace immediately all power
cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks
or abrasion damage along its length or at
either end.
When moving the refrigerator away from
the wall, be careful not to roll over or damage
the power cord.
SAVE THESE
INSTRUCTIONS

Icemaker
Customizable Drawer
Freezer Drawer
6
Features
30" Bottom-Freezer
Wine rack
Fresh Food
Shelves
Fresh Food
Door Bins
Vegetable Pan
Fresh Food
Section

Alarm
To turn the Alarm feature on, press and hold
the ALARM button for 3 seconds. ALARM will
be underlined when active. To turn off, press
and hold the ALARM button for 3 seconds.
The underline will disappear.
When the ALARM
is active, the alarm
will flash and beep
if you keep the door
open for more than 2 minutes. 7
Temperature Controls
Temperature
controls
Changing
display
temperatures
from °F to °C
To change the temperature display between
Fahrenheit and Celsius, press both the plus (+)
and minus (–) pads for 5 seconds.
The temperature display shows the actual
temperature of the fresh-food compartment,
freezer drawer or customizable drawer when
each one is selected by toggling the Zone
indicator. The actual temperature will vary from
the set temperature based on factors such as
frequency of door openings, amount of food,
defrost cycling and room temperature.
NOTE: Frequent door openings or doors left open
for periods of time may increase the internal
temperature of the compartments temporarily.
To turn off the cooling system, toggle the ZONE
indicator to the fresh-food mode. Press the plus
(+) pad until the display shows OFF.
To turn the cooling system on, toggle the ZONE
indicator to the fresh-food mode and press
the minus (–) pad until the desired temperature is
displayed. The preset temperature of 0°F for the
freezer or 37°F for the fresh-food unit will appear
in the display.
To check the current temperature setting for a
compartment, press the plus (+) or minus (–) pad
once. After 5 seconds, the display will return to
the actual temperature.
To change the temperature settings, press
the plus (+) or minus (–) pad for each increment
to the desired temperature set point. Allow
24 hours for the unit to reach the temperature
you have set.
Temperature Ranges
Low High
Fresh Food
Freezer
Drawer
Customizable Drawer Temperature Ranges
Low High
Freezer
Chill
Wine
NOTE: Setting the controls to OFF stops cooling,
but does not shut off electrical power to the unit.
All readings in °C will be rounded.
34°F
1°C 46°F 8°C
30" Bottom-Freezer
Fresh Food – Solid Door Unit
Fresh Food – Glass Door Unit
Upper Drawer – Freezer
Lower Drawer – Customizable
-6°F
–21°C
34°F
1°C
40°F
4°C
+6°F
–14°C
46°F
8°C
55°F
13°C
–6°F
–21°C +6°F –14°C

8
Automatic Icemaker (freezer models)
30" Bottom-Freezer
Automatic
icemaker
A newly installed refrigerator may take 12–24
hours to begin making ice. The refrigerator
is shipped with the icemaker set to ON.
The icemaker will produce seven cubes per
cycle—approximately 15 cycles in a 24-hour
period, depending on freezer compartment
temperature, room temperature, number of
door openings and other use conditions.
If the refrigerator is operated before the water
connection is made to the icemaker, set the
icemaker to OFF. To set the icemaker to OFF,
press the ZONE indicator on the control pad
twice to select the freezer drawer. Press the ICE
icon to the right. The line under ICE will
disappear and the word OFF will show under ICE.
Throw away the first full bucket of ice.
Be sure nothing interferes with the sweep
of the feeler arm.
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes
will become cloudy, taste stale and shrink.
After the icemaker has been turned on again,
there will be a delay of about 45 minutes before
the icemaker resumes operations.
NOTE: In homes with lower-than-average
water pressure, you may hear the icemaker
water valve cycle on several times when
making one batch of ice.
NOTE: Icemaker works best between
40 and 120 PSI home water pressure.
Icemaker
Feeler Arm
Accessing
the icemaker
and freezer
drawer
The icemaker is located on the ceiling of the
freezer drawer and to the left rear. There is
an LED strip in the freezer drawer ceiling. The
freezer drawer contains 1 ice bin.

Thewater filter cartridge is located below the
customizable drawer on the lower-right side of the
appliance.
To Replace the Filter:
Whilethefiltercartridge may last up to1 year,
replacementfrenquencywilldependoniceusage.
Thereisareplacementindicatorlightforthewater
filtercartridge on the control panel. The filter
cartridgeshouldbereplacedwhentheword
REPLACE appears beneath FILTER on the control
panel.
Installing the Filter Cartridge:
1. Openthecustomizable drawer to gain access to
thewater filter cartridge.
2. Removetheoldcartridgebytwisting
counterclockwise. Pull forwardon the filter
to remove.
3. Insertthenewfilterintothe compartment and
twistclockwiseuntil the cartridge stops.
To Reset the Filter Status Light:
Pressand hold the FILTER button for 3seconds.
Filter Bypass Plug:
You mustusethefilterbypassplug if:
a) youhave ahouseholdreverse osmosis water
system and/or anotherformof home water
filtration system.
b) areplacement filter is notavailable.
Theicemaker will not operate without the filteror
filterbypass plug installed.
Thebypass plug and minimanualare located
inthe bottommachine compartment.
Replacement filters:
To order additional filter cartridges, visit our
Website at monogram.com, or call GE Parts and
Accessories, 800.626.2002.
Filter Model Number GSWF
IMPORTANT NOTE: Remove the water filter
to immediately stop any water leak from the
icemaker.
9
Water Filter
30" Bottom-Freezer
Water filter
cartridge
Water Filter
Cartridge
Child control
lockout
This child control lockout feature prevents
unwanted changes to your temperature settings. After the desired temperature is set, the temperature can be locked. To lock, press and
hold the LOCK button for 3 seconds. To unlock,
press and hold the LOCK button for 3 seconds.

Adjustable
shelves
Tempered glass shelves in the fresh food section
enable you to make efficient shelf arrangements
to fit your family’s food storage needs.
To adjust shelves: Tilt the shelf up at the front
and slide it up or down along the back wall to the
placement you want.
Handle glass shelves carefully. Rough handling
of tempered glass can cause it to shatter.
To remove shelves:
NOTE: To remove a shelf, all shelves under it must
first be removed.
1. Remove any food from the shelf
2. Remove covers at the bottom of each track.
3. Tilt the first shelf up at the front.
4. Slide the shelf down along the back wall until
you reach the bottom where the notch is
located. Slide the shelf through the notch.
10
Vegetable Pan/Shelves
30" Bottom-Freezer
Vegetable pan
The Vegetable Pan in the fresh-food section
of the refrigerator has LED strip lighting above
the drawer.
There are adjustable dividers with several
different position options. The divider is held in
place by a tab located under the handle, a slot
located on the back wall and a stabilizing rib on
the bottom of the drawer for each position.
To change the divider position:
1. Pull up on the back of the divider to release
it from the slot in the back and off of the tab
in the front.
2. Slide the divider into a new location, making
sure it seats into the rib on the bottom of
the drawer.
3. Pull up on the back of the divider to locate
the front under the tab at the new location.
Lighted
vegetable
drawer shelf
The lighted vegetable drawer shelf provides
lighting for the lower compartments. The lights
are recessed into the shelf to illuminate the
drawers below.
To remove the shelf:
1. Lift the shelf and carefully pull forward to
expose the wires.
2. Unplug the shelf and carefully remove it from
the refrigerator.
To replace the shelf:
1. Carefully set the shelf onto the side rails,
leaving the plug exposed.
2. Plug the shelf into the refrigerator.
3. Carefully slide the shelf into place.
Ribs
Tab Slot
Cover
LED lights are located
under the shelf at the front
Lighted Vegetable
Drawer Shelf
Lift shelf and
pull forward
5. Repeat for removing the other shelves.
To replace shelves:
Replace shelves by perform steps 1 through 4
in reverse.
4. Push down on the back of the divider to seat
it into the slot at the new location.
Front
Back

11
Bins/Rack/Customizable Drawer
Door
bins
The door bins are removable. Lift bin out of the
bin bracket to remove.
The bin brackets are adjustable and can move
up and down to meet your storage needs.
Do this by tilting the bin up at the front and
sliding it up or down along the door to the
placement you desire.
30" Bottom-Freezer
Door Bin
Bin Bracket
Wine/
beverage rack
The wine/beverage rack fits onto one of the glass
shelves in the fresh-food compartment. The rubber
coating on the portions of the rack that sit on top of
the shelf keeps the rack from slipping or scratching
the shelf. The wine/beverage rack will hold 2-liter
bottles, wine bottles and champagne bottles.
Customizable
drawer
The customizable drawer can be used as
a freezer, as a fresh-food refrigerator or as
a wine/beverage drawer.
To customize your drawer:
Press the ZONE indicator on the control pad to
select the customizable drawer.
Recommended Temperatures for Customizable
Drawer:
This drawer has LED strip lighting above it. There
is also one adjustable divider that can be placed
in different positions and a bin that can slide left
or right in the drawer.
To change the divider position:
1. Pull in the tabs at the top of the divider to
release it from the tab holes at the front and
back of the drawer.
2. Lift the divider off of the raised tabs at the
bottom of the drawer.
3. Move the divider to its new location and slide it
onto the raised tabs.
4. Pull in the tabs at the top of the divider and
position the divider so the tabs will fit into the
tab holes. Release the tabs so they lock into
place.
Raised Tab Tab Hole
Divider
Chill
Freeze
Wine
Fresh Food
Freezer
Wine Storage
37°F/3°C
0°F/–18°C
55°F/13°C
Button Function Temperature
Removable sliding bin
Tab

12
External Moisture Control / LED Lighting
External
moisture
control
This product is equipped with an external moisture
control feature. The refrigerator is shipped with the
external moisture control feature off.
In some humid environments, moisture can form
on the front surface of the refrigerator cabinet.
If moisture does appear on the front surface of the
refrigerator cabinet, turn on the external moisture
control feature by pressing and holding the ALARM
and LOCK buttons on the control panel for 5
seconds. When activated, a small picture of a
water droplet with a line through it will appear
below the (+) and (–) signs on the control panel.
30" Bottom-Freezer
LEDdisplay
lighting
This refrigerator has LED lighting on both sides of
the interior as well as above the freezer drawer
and above the customizable drawer.
Glass Door Models Only
The glass door models have a display light option
for the interior side lights: full power and 1/2
power.
In display mode at either full or 1/2 power, the
lights will stay on after the door is closed and
automatically go off after 1 hour.
To access the lighting options, press the ZONE
indicator on the control pad. In fresh-food mode,
the LIGHTS button is to the right on the control
pad. When lights are at full power, there are 2
bars under LIGHTS; at 1/2 power, there is 1 one
bar; when the lights are off, there are no bars.
Glass Door Model – Lights at Full Power
Glass Door Model – Lights at 1/2 Power
Glass Door Model – Lights Off

13
Sabbath Mode
Sabbath
Mode
The Sabbath Mode was designed for use on the
Jewish Sabbath and Holidays. The Sabbath Mode
feature makes it possible for observant Jews to
refrigerate and freeze food during the duration
of the holiday.
The Sabbath Mode feature can be set to override
typical reactions caused by your interaction with
the refrigerator. While in the Sabbath Mode, your
refrigerator will still operate. However, the
refrigerator will not respond to your actions.
While in the Sabbath Mode, you may notice
the fan running when the door is opened,
however, this is not a result of your actions.
The fan will operate at predetermined times.
The defrost heater will continue to defrost
the refrigerator and freezer and will be activated
on a timer. The defrost heater will not defrost
as a result of door openings or any consumer
actions.
ON/OFF—To activate the Sabbath Mode, hold
down the ALARM button and (+) pad on the
control panel for 5 seconds. SAB will be displayed
on the control. SAB will remain in the display and
the (+) pad and alarm button will remain lit until
the Sabbath mode is deactivated. Controls and
lights do not work until the ALARM button and
(+) pad are held again for 5 seconds.
DISPLAYS, ALARMS and LIGHTS—The main
temperature control displays will be deactivated,
therefore they will not be lit, sound a tone or
operate when touched. Door alarms and lights
will be disabled.
ICEMAKER—The icemaker will continue
to operate. The icemaker can be disabled by
turning the icemaker OFF prior to the Sabbath
(see Automatic Icemaker).
30" Bottom-Freezer

14
Care and Cleaning
Cleaning
outside
Door handles and trim—Cleanwith a cloth
dampenedwith soapy water. Dry withasoft cloth.
Keep the outside clean. Wipewitha clean
clothlightlydampenedwith mild liquiddish
detergent. Dry with aclean, soft cloth.
Donot wipe the refrigerator with asoiled dishcloth
orwet towel.These mayleavea residue that can
damagethe finish.Do not use scouringpads,
powderedcleaners, bleach or cleanerscontaining
bleachbecause these products canscratchand
damagethe finish.
Stainless steel—Regularly clean andpolish
theStainless Steel DoorPanelsand Handles
(onsome models) with acommerciallyavailable
stainlesssteelcleaner such as StainlessSteelMagic™
to preserveandprotectthe finefinish.Stainless Steel
Magicis availablethroughGEParts andAccessories,
800.626.2002,or GEAppliances.com.Order part
numberWX10X15.
InCanada, please call 1.800.661.1616
Donot use appliancewaxorpolishon the stainless
steel.
Custom Wood Panels - pleasecontactyour custom
panelsupplierfordirectionon cleaning and care.
Cleaning
inside
Turn off power at the circuit breaker or fuse box
before cleaning. Ifthis is not practical,wringexcess
moistureout of sponge orclothwhen cleaning
aroundswitches, lightsor controls.
Usewarm water andbakingsoda solution— about
atablespoon (15 ml) ofbakingsoda toa quart(1
liter)of water. This both cleansand neutralizes
odors.Thoroughly rinse and wipedry.
Other parts of the refrigerator—includingdoor
gaskets,vegetable drawer, ice storage bins andall
plasticparts—can be cleaned thesameway. After
cleaningthe door gaskets, applyathin layer of
petroleumjelly tothe doorgasketsat the hinge side.
Thishelps keep the gasketsfrom sticking and
bending out ofshape.
Avoid cleaning cold glass shelves with hot water
because the extreme temperature difference
may cause them to break. Handle glass shelves
carefully. Rough handling of tempered glass can
cause it to shatter.
Do not wash any plastic parts in the dishwasher.
30" Bottom-Freezer

Care and Cleaning
15
Preparing
for vacation
For long vacations or absences, remove food
from the refrigerator. Adjust the temperature up
(+) until the unit turns off. Clean the interior with
a baking soda solution of one tablespoon (15 ml)
of baking soda to one quart (1 liter) of water.
Leave the door open.
For shorter vacations, remove perishable foods
and leave the control at the regular setting.
However, if the room temperature is expected
to drop below 60°F (16°C), follow the same
instructions as for extended vacations.
Turn off the icemaker and shut off the water
supply to the freezer.
Interior Light
replacement
Do not try to replace a burned-out LED light.
An authorized technician will need to replace
the LED lights.
30" Bottom-Freezer

16
Preparation
Refrigerator
location
Do not install the refrigerator where
temperatures will be below 60°F (16°C) because
it will not maintain proper temperatures, and the
refrigerator couldl develop high internal
humidity.
For proper installation, the refrigerator must
be placed on a level surface of hard material
the same height as the rest of the flooring.
This surface should be strong enough to
support a fully loaded refrigerator,
or approximately 1,200 lbs. each. See
the Installation Instructions for complete
directions.
Clearances
Allow 15" minimum clearance between the door
and wall for a full 115° door swing. Allow 5" min.
clearance to a wall for a 90° door swing for
Monogram Stainless Steel (European) models.
30" Bottom-Freezer
4” distance to Wall.

The Problem Solver
Questions?
Use this
problem
solver!
PROBLEM POSSIBLE CAUSE
REFRIGERATOR SYSTEM •May be in defrost cycle when refrigerating system does not operate
DOES NOT OPERATE for about 45 minutes.
•Temperature control in the OFF position.
•If interior light is not on, refrigerator may not be plugged in at wall
outlet.
•The house fuse is blown/house circuit breaker is tripped. Replace fuse
or reset the breaker.
• Turn off the Sabbath Mode.
•If your control panel says SHO, then your showroom mode
was enabled. To turn this off, hold theALARM button and (-) pad
simultaneously for 5 seconds.
•Normal when refrigerator is first plugged in. Wait 24 hours
for the refrigerator to completely cool down.
•Often occurs when large amounts of food are placed in refrigerator.
This is normal.
•Door left open or package holding door open.
•Hot weather or frequent door openings. This is normal.
•Temperature control set at the coldest setting. See Temperature
Control.
VIBRATION OR RATTLING •Refrigerator may not be properly installed.
(Slight vibration – Anti-tip bracket may be loose.
is normal.) – Unit may not be level.
THUMPING SOUND • This is a normal operating sound.
WHEN CLOSING DOOR • Closing the door slowly will minimize the sound.
OPERATING •The variable speed compressor.
SOUNDS •Normal fan air flow—multiple fans blow cold air through the fresh-food
and freezer compartments—other fans cool the compressor.
• The fans change speeds in order to provide optimal cooling and
energy savings.
• These NORMAL sounds will also be heard from time to time:
– You may hear a whooshing or gurgling sound when the door closes.
This is due to pressure equalizing within the refrigerator.
– A water dripping sound may occur during the defrost cycle as ice
melts from the evaporator and flows into the drain pan.
– The flow of refrigerant through the freezer cooling coils may make a
gurgling sound like boiling water.
– Water dropping on the defrost heater can cause a sizzling, popping
or buzzing sound during the defrost cycle.
– You may hear cracking or popping sounds when the refrigerator is
first plugged in or during/after the defrost cycle. This happens as the
refrigerator cools to the correct temperature.
– The compressor may cause a clicking or chirping sound when
attempting to restart (this could take up to 5 minutes).
– The electronic control board may cause a clicking sound when relays
activate to control refrigerator components.
– Ice cubes dropping into the bin and water running in pipes as
icemaker refills.
– The icemaker water valve will buzz when the icemaker fills with
water.
30" Bottom-Freezer
17
REFRIGERATING SYSTEM
OPERATES FOR LONG
PERIODS OR CYCLES ON
FREQUENTLY
(Modern refrigerators
and freezers with more
storage space and a
larger freezer require
more operating time.
They start and stop
often to maintain
even temperatures.)

18
PROBLEM POSSIBLE CAUSE
DOOR NOT CLOSING •Package or bottle may be holding door open.
PROPERLY • Check the door gasket; it may be out of position
• Refrigerator is not level. See Installation Instructions.
• Hinge springs deactived. See Installation Instructions.
REFRIGERATOR •Temperature control not set cold enough. See Temperature Control.
TOO WARM •Hot weather or frequent door openings.
•Door left open for long time.
•Package may be holding door open.
ACTUAL TEMPERATURE •Refrigerator just plugged in. Allow 24 hours for system to stabilize.
NOT EQUAL TO SET •Door open for too long. Allow 24 hours for system to stabilize.
TEMPERATURE •Warm food added to refrigerator. Allow 24 hours for system to stabilize.
•Defrost cycle is in process. Allow 24 hours for system to stabilize.
FROST OR ICE •Drawer left open or package holding door open.
CRYSTALS ON •Too frequent or too long door openings.
FROZEN FOOD •Drawer may have been left open.
(Frost within package •Ice cubes or some other object may be stuck behind the drawer.
is normal)
SLOW ICE CUBE •Drawer may have been left open.
FREEZING •Turn temperature control to a colder setting.
•Package may be holding drawer open.
ICE CUBES HAVE •Old cubes need to be discarded.
ODOR/TASTE •Ice storage bin needs to be emptied and washed.
•Unsealed packages in freezer may be transmitting odor/taste
to ice cubes.
•Interior of freezer needs cleaning. See Care and Cleaning.
•Poor-tasting incoming water. Change the water filter.
AUTOMATIC •Icemaker is turned off.
ICEMAKER •Water supply turned off or not connected.
DOES NOT WORK •Freezer too warm.
•Piled up cubes in storage bin may cause icemaker to shut off
too soon. Level cubes by hand.
•Ice bin is not in position
•Clogged water filter
MOISTURE FORMS •Not unusual during periods of high humidity. Wipe surface dry.
ON OUTSIDE OF •Turn on the External Moisture Control feature.
REFRIGERATOR
MOISTURE •Too frequent or too long door openings.
COLLECTS INSIDE •In humid weather, air carries moisture into refrigerator when doors
are opened.
•Lower drawer switched from (freezer) to chill or wine.
REFRIGERATOR •Foods with strong odors should be tightly covered.
HAS ODOR •Check for spoiled food.
•Interior needs cleaning. See Care and Cleaning.
INTERIOR LIGHTS •No power at outlet.
DO NOT WORK •LEDs need replacing. See Consumer Service Section.
•The Sabbath Mode may be operating. Turn off Sabbath Mode.
DOOR DIFFICULT TO •Tight door seal is due to pressure equalizing within the refrigerator.
REOPEN IMMEDIATELY After closing the door, wait 5–30 seconds to reopen.
AFTER CLOSING
The Problem Solver
30" Bottom-Freezer

19
Manufactured for:General Electric Company, Louisville, KY 40225
Performance Data Sheet
SmartWater Filtration System
GSWF Cartridge
This system has been tested according to NSF/ANSI 42/53 for reduction of the substances listed below.
The concentration of the indicated substances in water entering the system was reduced to a concentration
less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42/53.*
(100% safety factors built in for unmetered usage)
Standard No. 42: Aesthetic Effects
Parameter USEPA Influent Influent Challenge Effluent % Reduction Min. Required
MCL Average Concentration Average Maximum Average Minimum Reduction
Chlorine — 1.845mg/L 2.0 mg/L+10% <0.05 mg/L 0.05mg/L >97.29% 96.43% >50%
T& O — — — — — — — —
Particulate** — 143,333#/mL atleast 10,000 particles/mL 29.83#/mL 140#/mL 99.98% 99.91% >85%
Standard No. 53: Health Effects
Parameter USEPA Influent
Influent Challenge Effluent % Reduction Min. Required
MCL Average Concentration Average Maximum Average Minimum Reduction
Turbidity 1NTU*** 10.3 NTU*** 1+1 NTU*** 0.106NTU 0.14NTU 98.97% 98.61% 0.5NTU
Cysts 99.95%Reduction 200,000#/L Minimum50,000 L 0 0 >99.99% > 99.99% >99.95%
Leadat pH 6.5 0.015mg/L 0.15mg/L 0.15mg/L+10% <0.001mg/L <0.001 mg/L >99.33% > 99.33% 0.010mg/L
Leadat pH 8.5 0.015mg/L 0.14mg/L 0.15 mg/L+10% 0.001 mg/L 0.003mg/L >99.29% 97.86% 0.010mg/L
Lindane 0.0002mg/L 0.0216mg/L 0.002 mg/L+10% <0.00002 mg/L < 0.00002 mg/L 99.07% 98.75% 0.0002mg/L
Atrazine 0.003mg/L 0.008mg/L 0.009 mg/L+10% < 0.002 mg/L < 0.002 mg/L >76.12% >66.67% 0.003mg/L
* Tested using a flow rate of 0.5 gpm; pressure of 60 psig; pH of 7.5 ± 0.5; temp. of 68° ± 5°F (20° ± 3°C)
** Measurement in Particles/ml. Particles used were 0.5-1 microns
*** NTU=Nephelometric Turbidity units
Operating Specifications
Capacity: certified for up to 750 gallons (2,838 l); up to six months
Pressure requirement: 40–120 psi (2.8–8.2 bar)
Temperature: 33–100ºF (0.6–38ºC)
Flow rate: 0.5 gpm (1.9 lpm)
General Installation/Operation/Maintenance Requirements
Flush new cartridge at full flow for 3 minutes to purge out trapped air.
Replace cartridge when flow becomes too slow.
Special Notices
Installation instructions, parts and service availability, and standard warranty are included with the product when shipped.
This drinking water system must be maintained according to manufacturer’s instructions, including replacement of filter
cartridges.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.
The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
Check for compliance with the state and local laws and regulations.
Note that while the testing was performed under standard laboratory conditions, actual performance may vary. Systems
must be installed and operated in accordance with manufacturer’s recommended procedures and guidelines.
NSF®
System tested and certified by NSF International against Standard 42 for the reduction of
chlorine, taste and odor, particulate Class I and Standard 53 for the reduction of cyst, lead,
Lindane, Atrazine and turbidity.

20
State of California
Department of Health Services
Water Treatment Device
Certificate Number
Date Issued: April 28, 2003
Trademark/Model Designation Replacement Elements
155903 -
GE GSWF GSWF
Manufacturer: General Electric Consumer Products
The water treatment device(s) listed on this certificate have met the testing requirements pursuant to Section
116830 of the Health and Safety Code for the following health related contaminants:
Cysts
Turbidity
Asbestos
Lead
Atrazine
Lindane
2,4-D
Microbiological Contaminants and Turbidity Inorganic/Radiological Contaminants
Organic Contaminants
Do not use where water is microbiologically unsafe or with water of unknown quality, except that systems certified for
cyst reduction may be used on disinfected waters that may contain filterable cysts.
750 galRated Service Capacity: 0.5 gpm
Rated Service Flow:
Conditions of Certification: