GE GTWN4950D User manual

For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
geappliances.com or call GE Answer Center®
service, 800.626.2000.
Listed by
Underwriters
Laboratories
GTWN4950D
GE®4.0 DOE cu. ft. stainless steel capacity washer
Specification Revised 3/13 360112
Circuit Requirements: An individual, properly-grounded branch
circuit, with a three-prong grounding-type receptacle, protected
by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 115V, 60Hz, 10A
Note: Washer wall outlet must be located within 36” of service
code entry. Wall outlet must not be located behind dryer.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
36
25-1/2
42
51
Side View
27
Rear View
36 42
27
23-1/2
2-1/2
25-1/2*
Side View Rear View
5-1/4
25-3/4
23-1/2
11-1/2
*24-1/2" from the edge of the side panel to the front.
25-1/2" from front to edge of endcaps.
Washer/Dryers XLC QSart
Dimensions and Installation Information (in inches)

Features and Benefits
• ENERGY STAR®qualified/CEE Tier II —meets or exceeds federal guidelines for
energy efficiency for year-round energy and money savings
• Infusor™wash system uses HE detergent, requiring less water than a traditional
topload washer
• Rotary electronic controls with cycle status lights provide accurate cycle times
• 16 wash cycles handle various fabrics and soils
• PreciseFill—washer will automatically measure the load size and add just the
right amount of water
• Bleach and fabric softener dispensers automatically operate with wash cycle
• 700-RPM spin speed—fast spin speeds remove water efficiently and minimize
dry times
• Model GTWN4950DWS – White on white
GTWN4950D
GE®4.0 DOE cu. ft. stainless steel capacity washer
Specification Revised 3/13 360112