Gear4music 4 Tier Home Studio Desk User manual

SWS-115
4 Tier Home Studio Desk by Gear4music, 6U
Assembly Guide

SWS-115 Page 1 of 7
1. Attach the main legs together using the bottom cross-support bar
and upper 6u rack as pictured. Tighten the bolts using the included allen key.
Stick the EVA pads under the legs if necessary.

SWS-115 Page 2 of 7
2. Attach the keyboard shelf support bracket as pictured.
Tighten the bolts.

SWS-115 Page 3 of 7
3. Place the keyboard shelf in the support brackets, bolt in place.
A safety screw is already installed, remove to let the shelf slide further out.

SWS-115 Page 4 of 7
4. Attach the small shelf brackets to the bottom cross-support bar as pictured.

SWS-115 Page 5 of 7
5. Attach the lower shelf onto the mounts.
You will need to pre-drill holes for the wood screws.

SWS-115 Page 6 of 7
6.Place the main shelf on the support brackets at the desired depth and
mount using the wood screws. You will need to pre-drill the holes.
Attach the steel rack shelf as shown and tighten the bolts.

SWS-115 Page 7 of 7
7. Place the top shelf on the support brackets at the desired depth, as pictured.
Mount in place using the wood screws.