Gear4music BARSTOOL User manual

BARSTOOL
SETUPGUIDE

1
1x – Wrench
4x – Machine Screws
1x – Stool Pad
2x – Allen Keys
4x – Shims
4x – Sleeved Allen Head Screws
2x – Stool Legs
1x – Swivel Base
1x – Outer Support
8x – Nuts and Bolts
First, check the contents of the package and make
sure you have everything you need.
CONTENTS CHECKLIST

2
ASSEMBLY INSTRUCTIONS
1. Place the two legs together, as shown in the
image below.
3. Place the swivel base on top of the legs, aligning
the holes. Insert bolts and screw in nut securely.
Repeat for the remaining holes.
2. Slide the outer support over the legs and align
the holes. Unscrew the sleeved allen head
screws and insert the long end through the hole
(see diagram below). Reattach the sleeve on the
other side to secure. Tighten using the supplied
allen wrench. Repeat for the other holes.
4. Turn the stool over and bolt the seat pad to the
base, as shown in the image below. Repeat for
the remaining holes.
NOTE – If the stool legs are uneven, insert a
shim (supplied) between the foot pad and the
stool leg to level the stool.
If you have any more questions about this product, please do not hesitate to contact the
Gear4music Customer Service Team on: [phone] or [email protected]