Geeek T801 User manual

T801/T810/T812 Installation Guide
Version 4.2
V180720

OVERVIEW
Top Panel
Left panel
Front Panel
Foot Pad x4
Right Panel
Power Switch
Bottm Cover
Middle Plate
Aluminum Frame
(short ones) x2
Aluminum Frame
(long ones) x4 HDD Bracket
Rear Panel
Front I/O Module
GPU Holder

SCREWS LIST
A B C D
E F G H
M3.5 x 8mm screws
for power switch ,3.5"
HDD
10mm Standoffs M3 Nuts
M4 x 8mm screws for
GPU, Aluminum Frame
M3x8mm screws for
Nuts, Aluminum Frame
M3x5mm screws for
Motherboard
M3 x 10mm for
2.5” HDD
Screws for Fan

Please read the “Aluminum Frame
installation”before assembling this case
01 02
03 04
Aluminum Frame
installation Screw
Acrylic
Plate
Nuts

9X
9X
Please install the standoffs
according to the holes on
your motherboard
STEP 01 Install the 10mm Standoffs on
the Middle Plate
Standoffs
M3x8mm
screw

2X
2X
2X
For the previous version 4.1
(include the older version) Please
reverse the USB front I/O module
to the opposite side first, then
install with the 12mm standoffs.
STEP 02 Install the Front I/O Module

8X
8X
STEP 03 Install the Middle Plate

3X
3X
STEP 04 Install the Rear Panel

4X
STEP 05 Install the Fan on the Rear Panel

4X
STEP 06 Install the Power Supply

9X
STEP 07 Install the Motherboard Please install the CPU cooler
and ram on the motheboard
first

STEP 08 Install the GPU Card

2X
STEP 09 Install the GPU Card For V4.1 (include the old
version), please refer to the
old installation guide

3X
3X
STEP 10 Install the Aluminum
Frame on the Rear Panel

8X
STEP 11 Install the Fan on the Left
Panel

2X
8X
2X
STEP 12 Install the Left Panel and
Right Panel

H
2.5” HDD will need two
M3x10mm screws to fix on
one side
STEP 13 Install the HDD

STEP 14 Install the Power Switch

6X
6X
STEP 15 Install the Front Panel

Screws
for Foot
pad
12X
12X
STEP 16 Install the Bottom Cover