Geemarc Viso 20 User manual


123
INSTRUCTION MANUAL
!!!Please refer to our website: www.geemarc.com
for an up to date user guide, as there may be
important updates and changes you need to be
aware of !!!
Cautions:
Precautions and maintenance
zFor indoor use only
zTo avoid risk of fire or electric shock, do not expose the unit to
moisture or condensation.
zTo avoid overheating, do not block the ventilation holes on the
back of the Clock Display.
zKeep the Clock Display out of direct sunlight.
zDo not dismantle the Clock Display. There is a risk of electric
shock and there are no user-serviceable parts inside.
Dismantling the Clock Display will void your warranty.
Cleaning the LCD Screen
zTreat the screen carefully. tThe screen of the Clock Display is
made of glass and can easily be broken or scratched.
zIf fingerprints or dust accumulate on the LCD screen, we
recommend using a soft, non-abrasive cloth such as a camera
lens cloth to clean the LCD screen.
zMoisten the cleaning cloth with a cleaning solution and apply the
cloth to the screen.
Introduction:
Thank you for the purchase of the Clock Display. It is designed to
allow you to see the time quickly and easily and any warning
functions displayed.
Please read this User Manual carefully to use the Clock Display
correctly.
Features: Days Clock
Packaging Check List:
z7 inch Clock Display
zUser manual
zBracket
zAC adapter
1. Product Diagram
1.1 Back side Buttons
1.Menu
2.Exit
3.Vol- / Up / Left / Increase
4.Vol+ / Down / Right / Reducing
5.Play / Pause / OK
1.2 Left side of the Clock Display
DC in “ ” on the left side of the Clock Display.
2. Getting Started
1. Place the Clock Display with installing bracket on a steady flat
position, then plug the AC adapter into a standard 100-240V AC
electrical outlet and the other end into the DC IN slot on the left
side of the Clock Display.
2. Remove the protective film covering the Screen.
3. Hold and Press the MENU button on the backboard to On/Off
Switch.
3. Operating Instruction
When you power the unit on for the first time it will show the
startup logo. Then the main menu will display after a few seconds.
After this the Days Clock will display you can easy see the details
week day, time, month and year on the Clock Display screen, and
they will change automatically.
4.Setting
Press Menu key and select the Setting icon in the main menu.
Press “ ”Button to enter the Setting interface and press
to highlight your selection. Press “ ”Button to enter
the setting value. Then hold and press to set the value.
You can select Style Setup, Set Days-Clock, Calendar Setup,
System Setup, and so on.
4.1. System Setup
Language
Changes the operating language of the photo Clock Display.
Available Values: English, Nederland, Français, Deutsch, Italiano,
Espanol, Hebrew.
Grayscale
Hold and press “ ” or “ ” buttons to select the Gray Scale
level that you require between 1 to 10.
Brightness
Hold and press “ ” or “ ” buttons to select the Brightness
level that you require between 1 to 10.
Contrast
Hold and press “ ” or “ ” buttons to select the Contrast
level that you require between 1 to 10.
Auto power on & off function
Remarks:
1. In order to activate the auto power ON & OFF function, please
check the settings for the Sleep timer and Auto boot Time are
set correctly. If set to OFF, the function is not activated.
2. Areminder for the Auto OFF appears 1 Minute before the frame
switches off. Press any key to cancel theAuto OFF function.
3. If Power OFF is activated and the frame switches off at the
selected time, the frame goes into Sleep-mode. To switch the
frame on again, you need to press and hold the Menu Button at
the rear side of the frame.
Auto Shut Time
Set the auto power off time in the format of “[Hour]:
[Minute]”.Choose System setup/ Auto shut time with . Use
the “ ” or “ ” buttons to switch between fields, hold and
press “ ” or “ ” buttons to change time field values. Keep
the Sleep Timer on.
Auto Boot Time
Set the auto power on time in the format of “[Hour]: [Minute]”.
Choose System setup/ Auto boot time with Use the “ ”
or “ ” buttons to switch between fields, hold and press “ ”
or “ ” buttons to change time field values. Keep Regular Boot
on.
Power Frequency:
You can choose to set the function auto power ON/OFF as follows:
- Workday, Week end, Once, Every day. Use the “ ” or “ ”
buttons to switch between fields, hold and press “ ” or “ ”
buttons to change mode field values.
Firmware Version:
You can check the software version of your Viso 20.


456
Reset Default settings:
Use this function to set your Viso 20 with the factory parameters.
Choose Reset default setting and press “ ”Button to enter,
Use the “ ” or “ ” buttons to select Yes and press
“”Button“ to validate.
4.2. Calendar Setup
Adjust Date
Set the current date in the format of “[Year]: [Month]: [Day]”. Short
press the “ ” or “ ” buttons to switch between fields, hold
and press “ ” or “ ” buttons to change date field values.
Adjust Time
Set the current time in the format of “[Hour]: [Minute]”. Short press
the “ ” or “ ” buttons to switch between fields, hold and
press “ ” or “ ” buttons to change time field values. Press
to save.
Time Format
Change to display the time in either 12-hour or 24-hour time
format. Available Values: 12 Hours, 24 Hours. Hold and press
“” or “ ” buttons to change the Time Format.
4.3 Set Days Clock
Select Set days Clock in the main menu. Press “ ”Button to
enter the Setting interface and short press to highlight
your selection (Morning, Evening, Afternoon, Night to select).
Short press “ ”Button to enter setting interface , then short
press to select area , hold and press for 1-2
second to adjust the Value down and up ,after that, press to
complete ,follow this method for the setting you require.
4.4 Style Setup
Select Style setup in the main menu. Press “ ”Button to enter
the Setting interface and short press to your selection
(Style1, style2 and style3 to select). Short press “ ”Button to
complete .
Style 1: Day of the week, hour and date
Style 2: Day of the week, time of day, hour and minute
Style 3: The screen displays “Now it’s (day of the week and time of
day)
5. Troubleshooting Guide
If you are having problems with your Viso 20 clock or for further
assistance, please contact Technical Support.
- No power: Please check whether the AC-Adaptor is inserted
correctly.
- Display too bright or too dark: Please adjust the brightness or
contrast in the setup menu.
- The colour is light or no color: Please adjust the color and
contrast setup.
6. Stand Instruction
The bracket is connected to the back cover of the product. Please
open the bracket before you place it steadily on the table, pull the
bracket to the slot before you pick it up. Please refer to the
illustration above.
7. Technical Specifications
zAdapter: Input AC 100-240V 50/60HZ Output DC 5V/1.5A
zScreen Parameter:
Screen Size: 7 inch TFT
Resolution: 800*480 Pixels
Contrast: 400-500:1
Aspect Ratio: 4:3
Brightness: 300-400cd/ m
2
Response Time: 20ms
Viewing Angle: 60°(left/right/vertical), 40°(horizontal)
Working Temperature:
Humidity: 0 °C ~ 40 °C 10-85%
GUARANTEE
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all
repairs or replacements (at our discretion) are free of charge.
Should you experience a problem then contact our help line or
visit our website at www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages
to any parts. The product must not be tampered with or taken
apart by anyone who is not an authorized Geemarc
representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE
AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF
A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom
only.
DECLARATIONS:
CE Directives
Geemarc Telecom SA hereby declares that this product
is in compliance with the essential CE Directive requirements..
The CE declaration of conformity may be consulted at
www.geemarc.com
Electrical connection: The apparatus is designed to operate
from a 230V 50Hz supply only. (Classified as hazardous voltage
according to EN60950 standard). The apparatus does not
incorporate an integral power on/off switch. To switch off the
apparatus, disconnect the power adaptor. When installing the
apparatus, ensure that the mains power socket is readily
accessible.
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment)
has been put in place for the products at the end of their
useful life are recycled in the best way.
When this product is finished with, please do not put it in your
domestic waste bin. Please use one of the following disposal
options:
- Remove the batteries and deposit them in an appropriate WEEE
skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new
one, they should accept it.
Thus if you respect these instructions you ensure human health
and environmental protection.







For product support and help visit our website at
www.geemarc.com
telephone [phone]
or fax [phone]

QUGViso20_En_A4_V1.2