Geemarc Wake'n'Shake User manual

1 2 3
USER GUIDE
!!! Please refer to our website: www.geemarc.com for an up to date user
guide, as there may be important updates and changes you need to be
aware of !!!
What’s in the box
●Wake & Shake Light ●Power supply unit ●This instructions guide ●1 Shaker
Signs and symbols
The following symbols appear in the instructions for use and on the battery door.
WARNING : Warning instruction indicating a risk of injury or damage to
health.
IMPORTANT : Safety note indicating possible damage to the device/
accessory.
NOTE : Note on important information.
1. Safety notes
WARNING
Only operate the device with the power supply unit provided and the mains voltage
specified on the power supply unit.
Do not operate the device if it is visibly damaged.
In the event of defects or operational faults, switch the device off immediately and
disconnect it from the mains socket.
Do not pull on the mains cable or on the device to disconnect the power supply unit
from the socket.
Never plug in or unplug the power supply unit when you have wet hands.
Never hold or carry the device by the mains cable.
Keep packaging material away from children (risk of suffocation).
Arrange the mains cable so that no-one will trip over it.
Never use the device in proximity to moisture.
2. Intended use
The Wake-up Light wakes you from sleep in a gentle and natural manner. The LED
light gradually becomes brighter like a rising sun, allowing your eyes to slowly become
accustomed to the light conditions and your body to gently prepare itself for waking up.
The light intensity can be set to your personal preferences. Along with the simulated
sunrise, you can set an acoustic alarm to help you wake up. Choose between the
radio, a beep or five natural sounds or you can select shaker vibration. The Wake-up
Light provides a rested and pleasant start to your day.
3. Device functions:
Clock display
Wake-up function with simulated
sunrises and alarm
Two alarms selection Simulated
sunrise
Radio
5 natural sounds
Shaker vibrations Goodnight function
LED light can be used as a lamp
Mood light function.
USB Smart Phone charger.
MP3 Input.
WARNING
The device is only intended for the purpose described in these instructions for use.
The manufacturer is not liable for damage resulting from improper or careless use.
4. Initial use
Remove the packaging material.
Check that all parts listed are present.
Check the device, mains plug and cable for damage. Place the device on a firm,
even surface.
Position the device approx, 40 cm from your head.
Remove the battery compartment cover on the rear of the device and insert the 4 x
AA batteries with corrected polarity battery symbol on compartment. The battery
supplies power to the device in the event of a power failure and is not intended to
be used as a permanent power supply.
Plug the power supply connector into the power supply socket on the underside of
the device.
Insert the main plug into a suitable socket. The time will display and you can set the
hour format.
NOTE: All settings will go back to normal time mode after 6 seconds, press the
TONE button to exit if you want to exit the settings.
5. Unit description
FRONT RIGHT
A1. LED light
A2. SET/MEM button (for adjusting time and radio station storage)
A3. ALARM button (for adjusting the alarm time n alarm source)
A4. RADIO button (for activating the radio function)
A5. SNOOZE button (for activating snooze function, goodnight function or Wake up
light function)
LEFT REAR
A6. TONE button (for adjusting the volume and selecting alarm tone)
A7. LIGHT button (for switching on/off the light and adjusting the back light and color
mood light selecting)
A8. UP/Down button (For adjusting time, alarm and volume)
A9. Aux Input Jack (For connecting the MP3 input)
A10. USB port (for charging the smart phone)
A11. Battery compartment with cover
A12. Shaker Jack (for connecting the shaker)
A13. Reset-Hole (Resetting the device to factory settings)
A14. Switching power adapter (Select the good adaptor)
6. Display description
B1. Time / alarm time or radio frequency
B2. Light symbol
B3. Good night
B4. Shaker
B5. Beep Alarm sound
B6.Radio
B7. Seagull sound
B8. Wind sound
B9. Rain forest sound
B10. Frog sound
B11. Bird sound
B12. FM radio frequency
B13. Alarm 1
B14. Alarm 2
B15. Sleep
B16. Radio station memory
7. Operation
NOTE: All settings will go back to normal time mode after 6 seconds, press the
TONE button to exit the settings.

456
7.1 Setting the time
Press the SET MEM button, the hour will flash.
12:00
Press the Up ▲button to set the hour.
12
Press the DOWN ▼button to set the minute
00
Press the SET MEM button, Choose between 12 and 24 hour
format with the UP▲/ DOWN▼buttons.
12 hr
Press the SET MEM button, Choose Snooze time 5 to 30 minutes
at 5 minutes steps (Default is 5 minutes) with the UP▲/ DOWN▼
buttons.
ZZ05
Press the SET MEM button, Time is set.
12:00
7.2 Setting and activating alarm
Press the ALARM button once, Alarm 1 will be set.
Press the ALARM button twice, Alarm 2 will be set.
Press the ALARM button until OFF fade away.
Setting alarm time by pressing UP▲or DOWN▼button.
Press the SET MEM button each times.
Selecting the alarm sound: The bird, frog, rain forest, wind, seagull,
radio or beep will display a sound.
Press the ALARM button, the alarm sound is set.
12:00
Press the SET MEM button, selecting shaker vibrator .
Press the ALARM button,
Alarm is set andAlarm 1 icon lit up if selected.
If Alarm 2 is selected,Alarm 2 icon lit up.
NOTE: During the Alarm, press the alarm button to stop it permanently.
7.3 Setting wake up light
Press and hold SNOOZE wake‘n shake display shown.
Setting the wake’n shake light function.
Default wake n shaker light is OFF,
OFF
Press the UP▲or DOWN▼button,
Selecting the wake’n shake light time to 15 or 30 minutes.
Wake’n shaker light is set and will be lit up gradually before the alarm
time.
15
30
7.4 Deactivating the alarm
Press the ALARM button once, Alarm 1 will be deactivated.
Press the ALARM button twice, Alarm 2 will be deactivated.
Press the ALARM button until OFF showed,
Alarm is deactivated.
OFF
7.5 Deactivating the alarm
Press the ALARM button until OFF fades away.
Alarm is activated again.
NOTE: The wake’n shake light will be deactivated when alarm is OFF.
7.6 Alarm Tone
Press the TONE button at normal Time mode.
Setting the Tone in 10 frequency.
Default Tone is #5 frequency.
F05
Press the UP▲or DOWN▼button.
Selecting desired tone frequency in alarm.
Desire tone frequency is set.
7.7 Alarm Volume
Press the UP▲or DOWN▼button at normal Time mode.
Selecting the volume of alarm.
Default volume is U08 and maximum level is U20.
U08
7.8 Connecting Shaker Vibrator
Connect shaker vibrator at rear jack .
7.9 Light Function
Press the LIGHT button at normal Time mode.
User device as normal lamp.
Light will be lit up gradually with the light icon on.
Press the UP▲or DOWN▼button adjusting the light intensity.
The default intensity L07 shown and the max intensity is L15.
L07
Press the LIGHT button again.
To switch OFF the light and light icon will fade.
7.10 Radio Function
Press the RADIO button at normal Time mode.
The radio frequency currently set will appear on the display.
Press the UP▲or DOWN▼button.
Setting the desired radio frequency.
Tip: to start the automatic scan, press and hold the UP▲or
DOWN▼button briefly and then release it again.
Press the TONE button.
The default Volume U06 will show on the display.
Press the UP▲or DOWN▼button.
Adjusting the volume, and the max volume is U12.
U06
7.11 Preset Radio Station / Listening Preset Radio Station
Press the SET MEM button until S01 shows.
The current radio station is stored in S01.
Press the SET MEM button until S02 shows.
The new desired radio station is stored in S02.
Max can be stored 10 radio stations.
S01
S02
Press the SET MEM button each times.
Listening preset radio stations and starts sequence S01 > S02 > S03.
7.12 Goodnight function
Press the SNOOZE button until OFF SLEEP shown.
Press the UP▲or DOWN▼button to select desired switch off time from
5 minutes to 90 minutes.
OFF
Press the TONE button exit or wait 6 seconds.
The selected switch off time will start to count with the SLEEP icon
flashing.
Press the SNOOZE button until the remaining time shown.
This function automatically switches off the radio or MP3 or a natural
sound after a set period of time.
7.13 Display Illumination
Press the LIGHT button until U03 shown at normal time mode.
Adjusting the display brightness by press the Light button each times.
Brightness changes U03>U04>U01>U02, Max brightness is U04.
U03
7.14 MP3 Playback Function
Press the RADIO button.
Connect the MP3 to the rear jack by cable.
AU shown on display.
AU
Press the TONE button. The default Volume U06 will shown on the
display.
Press the UP▲or DOWN▼button.
Adjusting the volume, and the max volume is U06.
U06
7.15 Smart Phone Charger Function
Connect the Smart Phone with USB cable to rear USB socket to
charge the Smart Phone.
8. Cleaning and maintenance
Clean the device with a dry cloth.
Do not use any abrasive cleaning products.
Protect the device from knocks, damp, dust, chemicals, drastic changes in
temperature, and nearby sources of heat (ovens, heaters).
9. Technical Data
Dimensions:120 x 170 x 120mm
Weight: approx. 508g
Voltage supply: 100-240V; 50/60Hz; 0.7A
Protection class II
For indoor use only
Radiofrequency range: 87.5-108.0 MHz FM
Illuminance: 300lux
10. GUARANTEE
From the moment your Geemarc product is purchased, Geemarc guarantee it for the
period of two years. During this time, all repairs or replacements (at our discretion) are
free of charge. Should you experience a problem then contact our help line or visit our
website at www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to any parts. The
product must not be tampered with or taken apart by anyone who is not an authorized
Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE
RETAINED AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
11. DECLARATIONS:
CE Directives
Geemarc Telecom SA hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of the RED 2014/53/UE.
The CE declaration of conformity may be consulted at www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in place for the
products at the end of their useful life are recycled in the best way.
When this product is finished with, please do not put it in your domestic waste bin.
Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they should
accept it.
Thus if you respect these instructions you ensure human health and environmental
protection.
For product support and help visit our website at www.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden City,
Hertfordshire, AL7 1SB,UK
telephone [phone] or fax [phone]
QUGWake&ShakeLight_En_A3_V1.8