GEENI SMART WI-FI LED BULB User manual

SMART WI-FI
LED BULB
START GUIDE
ENGLISH
Pour les instructions en français,
veuillez consulter la page 15

1
Contents
Download & Register 2-4
Plug In 5
Connect (Easy Mode) 6-7
Connect (AP Mode) 8-9
Questions, Troubleshooting, Notices 10-13
What’s in the Box
Get Ready
• Smart Wi-Fi LED Bulb
• User Manual
• Voice Control Guide
• Know your Wi-Fi network and password
• Make sure your mobile device is running iOS®9 or higher or
Android™ 5.0 or higher
• Make sure you’re connecting to a 2.4GHz Wi-Fi network
(Geeni can’t connect to 5GHz networks)
• Find an existing light socket (E12 base)
SMART WI-FI
LED BULB
START GUIDE
VOICE
CONTROL
GUIDE
Thank you for purchasing your GEENI smart home product.
Get started using your new devices by downloading Geeni, one
convenient app that manages everything straight from your
phone or tablet. Easily connect to your home Wi-Fi and control
multiple devices from the touch of your fingertips.
CAUTION: RISK OF ELECTRIC SHOCK OR BURNS – USE IN A DRY LOCATION ONLY.
Do not install the device with wet hands or when standing on wet or damp surfaces.
Suitable for use in operating environment between -20°C and 40°C (-4°F and 104°F).
Not for use in totally enclosed luminaires. Do not use with dimmers. Please make sure
the voltage of the LED bulb is compatible with the main electricity of your country before
connecting to a bulb holder. Ensure that the base of the bulb matches the bulb holder.
This device uses a non-replaceable light source. When the light source reaches the end
of its life cycle, the device should be replaced.

32
2 Register an account on your Geeni app.
STEP 1.
Enter your mobile phone number
or email address.
STEP 2.
Enter the verification code
and create a password.
1 Download the Geeni app from App Store or Google Play.

54
STEP 3.
Login to the App.
3 Plug In
How do I reset the device and what does the blinking light mean?
Reset the bulb by turning it off and on three times.
- Reset once (off and on 3 times) to reach Easy Mode, which is
the primary way the app will try to connect.
(When in Easy Mode, you’ll see the bulb flashing quickly, 2x per second)
- Reset again (off and on 3 times) to reach AP Mode,
which is the Backup Mode to help connect.
(When in AP Mode, you’ll see the bulb blinking slowly, every 3 seconds)
2 Register an account on your Geeni app.
STEP 1.
Screw in the bulb and turn on the power.
The bulb should be quickly
flashing 2x per second.

76
STEP 1.
In the Geeni app, on the top
corner of the Devices screen,
click (+).
STEP 2.
Make sure the bulb is flashing quickly,
indicating it’s ready to connect. If not,
turn the bulb off and on 3 times until
it is flashing. Press “Next Step.”
STEP 3.
Enter your Wi-Fi network and
password.
NOTE: Geeni can’t connect to 5GHz networks.
*If the connection fails, try to connect using AP Mode.
STEP 4.
The Geeni app will try to
connect your device.
4 Add device. Method 1: Easy Mode

98
5 Add device. Method 2: Backup AP Mode
STEP 1.
Make sure the device is in AP Mode, blinking slowly
(see reset instructions on p. 5)
STEP 2.
In the Geeni app, on the top corner
of the Devices screen, click (+).
Choose “AP Mode” in the top corner.
STEP 3.
Click Next and enter your
Wi-Fi details.
STEP 4.
Follow the instructions to choose
the device from your Wi-Fi list.
STEP 5.
The device will connect.
NOTE: Geeni can’t connect to 5GHz networks.

1110
Frequently Asked Questions
1. Can I share with family and friends?
Yes, you can share your bulbs with family and friends who will have
access to control your bulbs, plugs, cameras, and other Geeni devices. In
the Geeni app, press the Profile button and click on the “Device Sharing”
button, and you will be able to give or revoke sharing permissions.
In order to share, the other user should already have downloaded the
Geeni app and registered a new account.
2. Can I group multiple Geeni devices together?
Yes, you can group multiple devices of the same type together, by room,
location, or however else you want. The same devices can be in multiple
groups. (For example, create a group for “Bedroom” and another group
for “Entire House”, and your Bedroom lights can be included in both
groups). From your main device list, click on one of the devices you want
to group, press the “•••” button on the top right for advanced settings,
and click Create Group. You’ll then be able to choose which devices you’d
like to group together and will be able to rename them.
3. How Many Devices Can I Control?
Geeni’s app can control an unlimited amount of devices in an unlimited
amount of locations. Your router may have a limit of how many devices
can be connected to one router.
4. My Geeni device has a funny name. How do I rename it?
From your main device list, click on one of the devices you want to rename,
press the “•••” button on the top right for advanced settings, and click
Modify Device Name (or Modify Group Name, if applicable). You’ll then be
able to choose a more familiar name.
5. The bulb appears offline or unreachable, what should I do?
Check the light switch and make sure that it’s switched ON. The light bulb
requires an “always-on” power supply to operate properly.
Make sure your Wi-Fi router is online and in range.
Make sure you have the latest Geeni functionality by clicking “Check for
firmware update” in your device settings.
6. What’s the Wireless Range?
The range of your home Wi-Fi is heavily dependent on your home router
and the conditions of the room. Check with your router specifications for
exact range data.
7. If my Wi-Fi/Internet goes down, will Geeni still work?
Geeni products need to be connected to Wi-Fi in order to use them remotely.

1312
Troubleshooting
Reset the device
System Requirements
Technical Specications
Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the Wi-Fi
setup. Check whether there are any Internet connection problems.
If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
Reset once (off and on 3 times) to reach Easy Mode, which is the primary
way the app will try to connect. (When in Easy Mode, you’ll see the bulb
flashing quickly, 2x per second)
Reset again (off and on 3 times) to reach AP, which is the Backup Mode
to help connect.
(When in AP Mode, you’ll see the bulb blinking slowly, every 3 seconds)
• Mobile device running iOS®9 or higher or Android™ 5.0 or higher
• Existing Wi-Fi Network
• Existing light socket (E12 base)
• E12 base
• 120 V, 60 Hz
• Wi-Fi: IEEE 802.11N, 2.4GHz (not compatible with 5GHz Wi-Fi networks)
FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the two following
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to complywith the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
Important Information:
Before installing or replacing a bulb, read and follow all precautions, including the following:
CAUTION: RISK OF ELECTRIC SHOCK OR BURNS – USE IN A DRY LOCATION ONLY.
Do not install the device with wet hands or when standing on wet or damp surfaces.
Suitable for use in operating environment between -20°C and 40°C (-4°F and 104°F).
Not for use in totally enclosed luminaires. Do not use with dimmers. Please make sure
the voltage of the LED bulb is compatible with the main electricity of your country before
connecting to a bulb holder. Ensure that the base of the bulb matches the bulb holder.
This device uses a non-replaceable light source. When the light source reaches the end
of its life cycle, the device should be replaced.
Support:
If you encounter any issues, please contact us at [e-mail] for help.
To explore our full selection of products, visit us at: www.mygeeni.com
[phone] Toll-free (English Only)
© 2019 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006.
The illustrated product and specifications may differ slightly from those supplied. Geeni is a trademark of Merkury
Innovations LLC. iPhone, Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark ofApple Inc. Galaxy S is a registered trademark of Samsung Electronics
Co., Ltd. Google, Google Play, and related marks and logos are trademarks of Google LLC. iOS is a registered
trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa and all related logos
are trademarks of Amazon.com, Inc. or its affiliates. All other trademarks and trade names are those of their
respective owners.
Made in China

GUIDE DE DÉMARRAGE
DE L’AMPOULE À DEL
INTELLIGENTE WI-FI
For instructions in English, see pg 1
FRANÇAIS
Connexion impossible? Besoin d’aide?
NE RETOURNEZ PAS CE PRODUIT AU
MAGASIN OÙ VOUS L’AVEZ ACHETÉ
Soutien Geeni :
[e-mail]
ou tapez sur ‘Support’ dans l’appli Geeni
pour obtenir de l’aide.

17
Contenu
Téléchargement et enregistrement 18-20
Branchement 21
Connexion (mode facile) 22-23
Connexion (mode AP) 24-25
Question, dépannage et avis 26-29
Inclus dans l’emballage
Soyez prêt
• Ampoule à DEL intelligente Wi-Fi
• Guide d’utilization
• Guide de contrôle vocal
• Connaissez votre réseau Wi-Fi et mot de passe
• Assurez-vous que votre dispositif mobile fonctionne sous
le système d’exploitation iOSMD 9 ou supérieur
ou AndroidMC 5.0 ou supérieur
• Assurez-vous d’être connecté à un réseau Wi-Fi de 2,4 GHz
(Geeni ne peut se connecter aux réseaux de 5 GHz)
• Localisez une douille de lampe existante (base GU10)
GUIDE DE DÉMARRAGE
DE L’AMPOULE À DEL
INTELLIGENTE WI-FI
GUIDE DE
CONTRÔLE
VOCAL
Nous vous remercions d’avoir acheté cette trousse de contrôle
pour maison intelligente de Geeni.
Commencez à utiliser vos nouveaux dispositifs en
téléchargeant Geeni, une appli pratique qui gère tout
directement à partir de votre téléphone intelligent ou tablette.
Connectez-vous facilement à votre réseau Wi-Fi résidentiel et
contrôlez plusieurs dispositifs du bout des doigts.
ATTENTION : RISQUE D’ÉLECTROCUTION OU DE BRÛLURES - UTILISEZ UNIQUEMENT
DANS UN ENDROIT SEC. N’installez pas l’appareil avec des mains mouillées ou lorsque
vous vous tenez sur des surfaces mouillées ou humides. Convient pour une utilisation
dans un environnement de fonctionnement compris entre -20 ° C et 40 ° C (-4 ° F et
104 ° F). Ne pas utiliser dans des luminaires totalement fermés. Ne pas utiliser avec des
gradateurs. Veuillez vous assurer que la tension de l’ampoule à DEL est compatible avec
l’électricité principale de votre pays avant de la connecter à un réceptacle. Assurez-vous
que la base de l’ampoule correspond au réceptacle. Cet appareil utilise une source
lumineuse non remplaçable. Lorsque la source de lumière atteint la fin de son cycle de vie,
l’appareil doit être remplacé.