Gefen 1x16 Audio DA User manual

®
1x16 Audio DA
USER MANUAL
www.gefen.com

Technical Support:
Telephone [phone]
[phone]
Fax [phone]
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday Pacific Time
Write To:
Gefen, LLC
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
www.gefen.com
[email protected]
Notice
Gefen, LLC reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
The 1x16 Audio DA is a trademark of Gefen, LLC
Macintosh is a trademark of Apple Computer Inc.
All trademarks are the property of their respective owners.
© 2010 Gefen, LLC, All Rights Reserved
ASKING FOR ASSISTANCE

TABLE OF CONTENTS
Introduction
Box Contents
How it works
Operation Notes
1x16 Audio DA Front Panel Layout
1x16 Audio DA Back Panel Functions
Link Cable - Wiring Diagram
System Specifications
Warranty
1
2
3
4
5
6
7
8
9

Thank you for purchasing the ex•tend•it 1x16 Audio DA series.
The ex•tend•it 1x16 Audio Distribution DAallows 16 audio locations from the same audio
source. The 1x16Audio Distribution DAalso extends the distributed audio to 16 locations
up to a 1000 feet away with CAT5.
INTRODUCTION
1

The 1x16 Audio DA system consists of:
(1) 1x16 Audio DA
(1) 5 VD power supply
(1) 6-ft Audio Cable
(1) User Manual
BOX CONTENTS
2

HOW IT WORKS
3
The ex•tend•it 1x16 Audio Distribution unit sits next to your audio source. Stereo cables
supplied with the 1x16 Audio Distribution package connects your audio source to the
1x16 Audio Distribution sender. TheAudio Extender receiver unit connects to your
speakers or audio output device. One CAT-5 cable per channel connects the 1x16 Audio
Distribution unit and the Audio Extender receive unit to each of the distributed locations
- up to 1000 feet away.

READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE 1X16 AUDIO DA SYSTEM
* Industry standard Category-5 (CAT-5) cables are used to link the 1x16 Audio DA and
receiver boxes together.
* The 1x16 Audio DA units are housed in a metal box for better RF shielding.
OPERATION NOTES
4

Front Panel Function Descriptions
POWER ON INDICATOR - Indicates that the unit is plugged in and powered on
1x16 AUDIO DA FRONT PANEL LAYOUT
5
1
1

12
POWER - 5V DC external power supply
AUDIO - Audio mini Jack input from source
Audio Out - RJ-45 connector connects to Audio Extender Receiver units.
1x16 AUDIO DA BACK PANEL FUNCTIONS
6
1
2
3
3

LINK CABLE - WIRING DIAGRAM
7
White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
RJ-45 Jack RJ-45 Jack
2 3 4 5
6
7 8 1
2 3 4 5
6
7 8 1
1818