Gefen DVI-2000HD User manual

DVI•2000HD
USER MANUAL
www.gefen.com

Technical Support:
Telephone [phone]
[phone]
Fax [phone]
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
[email protected]
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
The DVI•2000 is a trademark of Gefen Inc.
© 2008 Gefen Inc., All Rights Reserved
All trademarks are the property of their respective companies
ASKING FOR ASSISTANCE

CONTENTS
1 Introduction
2 Operation Notes
3 Features
4 Sender Panel Layout
5 Receiver Panel Layout
6 Connecting And Operating The DVI•2000HD
7 Network Cable Wiring Diagram
8 Specifications
9 Warranty

1
Congratulations on your purchase of the DVI•2000HD. Your complete satisfaction
is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen DVI•2000HD
The DVI•2000HD extends your dual link DVI display up to 1640 feet away from
your source. Dual link DVI describes the use of all 24 pins of the DVI (digital
visual interface) connector to achieve super high resolutions.
How It Works
The DVI•2000HDS sender unit sits next to your computer, set-top box or DVD
player source. Cables supplied with the DVI•2000HD connect your DVI source to
the send unit. The DVI•2000HDR receive unit sits next to your DVI display - up to
1640 feet away. The display plugs into the back of the receiver unit. One CAT-5
cable and multi mode LC fiber optic cable (8 strand) connect the sender and the
receiver units to each other.
INTRODUCTION

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI•2000HD
The fiber optics cable must be treated carefully when connectors are ex-• posed. They are susceptible to dust which can contribute to loss of pixels.
The DVI•2000 works for all DVI displays and supports resolutions up to• 3840x2400.
The DVI•2000 is housed in a metal box for better RF shielding.•
Supports DDWG standard for DVI compliant monitors.•
Uses CAT-5 cable for HDCP/DDC and control signals.•
2
OPERATION NOTES

3
Features
Extends any dual link DVI compliant device up to 1640 (500 meters) feet• from the computer
Uses an 8 strand multimode LC-LC fiber optic cable•
Uses one CAT-5e cable for DDC and control signals•
Support HDTV resolutions•
Supports up to 3840 x 2400 resolutions•
Supports DDWG standard for DVI compliant monitor•
Package Includes
(1) DVI•2000HDS Sender
(1) DVI•2000HDR Receiver
(1) 12v Power Supply
(1) 6 Foot DVI-DL cable (M-M)
(1) User’s Manual
FEATURES

4
Front Panel
Back Panel
HDCP & DDC
Signals
Status LED indicates
a link between the
sender and receiver
Power LED indicates the unit is powered
Hot Plug Detect Green 2 Green 1
Clock 2
Clock 1 Red 2Red 1
Blue 2Blue 1
Power
Connector
DVI In
SENDER PANEL LAYOUT

5
Front Panel
Back Panel
Green 2 Green 1
Clock 1
Power LED indicates the unit is powered
Clock 2
Red 2 Red 1
Blue 2 Blue 1 HDCP & DDC
Signals
Status LED indicates
a link between the
sender and receiver
Hot Plug Detect
Power
Connector
DVI Out
RECEIVER PANEL LAYOUT

6
How to Connect the DVI•2000HD
Connect the DVI•2000 sender unit to the DVI source using the supplied1. cables.
Connect the DVI•2000 receiver unit to your DVI display.2.
Connect the eight fiber optics and one CAT5 cable between the sender and3. receiver.
Plug the 12VDC power supplies into the DVI•2000 sender.4.
You should now have a video signal.5.
CONNECTING AND OPERATING THE DVI•2000HD

12345678
Gefen has specifically engineered their products to work with the TIA/EIA-568-B
specification. Please adhere to the table below when field terminating cable for
use with Gefen products. Failure to do so may produce unexpected results and
reduced performance.
CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types.
Gefen recommends using solid core cabling. CAT-6 cable is also recommended
for best results.
Each cable run must be one continuous run from one end to the other. No splices
or use of punch down blocks.
Pin Color
1 Orange / White
2 Orange
3 Green / White
4 Blue
5 Blue / White
6 Green
7 Brown / White
8 Brown
7
NETWORK CABLE WIRING DIAGRAM

8
Video Amplifier Bandwidth .................................................................. 2x 165 MHz
Input Video Signal .............................................................................. 1.2 Volts p-p
Input DDC Signal ......................................................................... 5 Volts p-p (TTL)
Dual Link Range ................................................................................. 3840 x 2400
DVI Input/Output Connector Type ................................................................ DVI-D
Link Connector ............................................................................................. RJ-45
Power Consumption ...................................................................... 15 Watts (max.)
Power Supply ............................................................................................. 12VDC
Dimensions ............................................................................... 4”D x 5.5 ”W x 1”H
Shipping Weight ............................................................................................ 5 Lbs
SPECIFICATIONS