GefenTV GTV-HDMI-2-HDMIAUD User manual

www.gefentv.com
HDMI to HDMI Plus Audio Converter
GTV-HDMI-2-HDMIAUD
User Manual

Technical Support:
Telephone [phone]
[phone]
Fax [phone]
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday PST.
Write To:
Gefen LLC
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefentv.com
[e-mail]
Notice
Gefen LLC reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
GefenTV HDMI to HDMI Plus Audio Converter is a trademark of Gefen LLC
© 2010 Gefen LLC, All Rights Reserved
All trademarks are the property of their respective owners
ASKING FOR ASSISTANCE
Rev A1

CONTENTS
1 Introduction
2 Features
3 Connecting The HDMI To HDMI Plus Audio Converter
4 Supported Audio Formats
5 Audio Processing
6 Panel Layout
7 Panel Descriptions
8 Specifications
9 Warranty

1
INTRODUCTION
Congratulations on your purchase of the GefenTV HDMI to HDMI Plus Audio
Converter. Your complete satisfaction is very important to us.
GefenTV
GefenTV is a unique product line catering to the growing needs for innovative
home theater solutions. We specialize in total integration for your home theater,
while also focusing on going above and beyond customer expectations to ensure
you get the most from your hardware. We invite you to explore our distinct
product line and hope you find your solutions. Don’t see what you are looking for
here? Please call us so we can better assist you with your particular needs.
The GefenTV HDMI to HDMI Plus Audio Converter
The GefenTV HDMI to HDMI Audio Converter is a product that takes a Hi Def
source using HDMI and outputs it to an HDTV display using HDMI and, in addi-
tion, up to 8 channels of LPCM audio output through eight RCA connectors. Also,
if a Bitstream audio is desired it outputs this to an Optical digital connector.
Additional features include switchable audio selections between auto mode and
manual mode affording further selection between two-channel audio only, multi-
channel bitstream and 7.1 LPCM audio.
How It Works
Connect a Hi Def source to the GefenTV HDMI to HDMI Audio Converter’s input
with the included HDMI cable. Connect another HDMI cable from the output of
the Converter to an HDTV display. Connect an optical audio cable from the Con-
verter to an external amplifier. Alternatively connect an amplifier to the 8 channel
RCA connectors. Finally connect the 5V DC power supply to the locking connec-
tor and to an electric outlet.
See pages 4 and 5 for further information about the switches on the front panel.

2
FEATURES
Features
• Resolution Supported up to 1080p Full HD
• Switchable selection between Auto mode and Manual mode
• HDMI v1.3 supported features:
Deep Color, Dolby TrueHD, DTS-HD Master Audio, Lip Sync (through the
HDMI connector only)
• Bitstream Audio via Optical Toslink and LPCM 7.1 via 8 RCAconnectors
• Locking power supply
• CEC pass-through
Package Includes
(1) HDMI to HDMI Audio (GTV-HDMI-2-HDMIAUD)
(1) 6 ft HDMI cable (M-M)
(1) 5V DC Power Supply
(1) User Manual

3
CONNECTING THE HDMI TO HDMI PLUS AUDIO CONVERTER
How to Connect the GefenTV HDMI to HDMI Plus Audio Converter
1. Connect a Hi Def source to the GefenTV HDMI to HDMI Audio Converter’s
input with the included HDMI cable.
2. Connect another HDMI cable from the output of the Converter to an HDTV
display.
3. Connect an optical audio cable from the Converter to an external amplifier.
Alternatively connect an amplifier to the 8 channel RCA connectors..
4. Finally connect the 5V DC power supply to the locking connector and to
an electric outlet and enjoy crisp and vibrant sound played through the
connected amplifier while watching clear video.
Wiring Diagram for the GefenTV HDMI to HDMI Plus Audio Converter
Hi Def Source
HDMI to HDMI Plus Audio Converter
Audio Receiver
HDTV Display
®
MULTI-CHANNEL RCA CABLE
HDMI CABLE
DIGITAL AUDIO (TOSLINK) CABLE
GTV-HDMI-2-HDMIAUD

4
SUPPORTED AUDIO FORMATS
The Audio Selector Switches
The audio output supports uncompressed LPCM 7.1 and lossless compressed
digital Bitstream (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio).
There are two switches on the front of the unit to the right of the power LED. (See
Panel Layout and Description on pages 6 and 7.) The switch at the left makes
changes to the input audio and the right switch changes from “Auto” to “Manual.”
Unless the right-hand switch is set to “Manual,” the audio selector switch will
not change the audio format from what is coming from the HDMI input. When
this switch is set to “Manual” the audio portion is changed according to what has
been selected.
Determining the Supported Audio Formats
The unit passes audio through its circuits according to the type of signal. See the
table below:
2 Channel LPCM
A
udio Forma
t
T
OSLINK
HDMI Ou
t
8
-Ch RC
A
5.1 Channel LPCM
7.1 Channel LPCM
Dolby Digital
DTS
Dolby True HD
DTS-HD Master Audio
X
X
X
X
X
X
X
X
X
X
X
X
X
A Note About Audio Processing in the GefenTV HDMI to HDMI Plus Audio
Converter:
When “2.1” is selected, the audio signal is output to the RF and LF only.
When “5.1 / 7.1” is selected audio is output from the “Multi-CH” output. When
“Bitstream” is selected, the signal is output from the “Optical” output only. The
signal output from TOSLINK should be LPCM 2 ch, AC3 5.1, or DTS 5.1.
The unit supports uncompressed digital LPCM 7.1, 5.1 or 2 channels and
compressed digital Bitstream (Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio) through the HDMI input and the RCA output.
It only supports Hi Res Audio via HDMI. It does not decode Hi Res Audio.

5
AUDIO PROCESSING
Mode Selection:
AUTO MODE:
To use this mode, set the EDID Mode Switch on the front panel to the AUTO
position. In Auto mode, the Converter directly retrieves EDID data from each
connected A/V display device and builds a new EDID created from the highest
common video resolution that all display devices can use together and the
highest audio capability. This new EDID is sent back to the source device.
MANUAL MODE:
To use this mode, set the Mode Switch on the front panel to the MANUAL
position. This mode will use a preset EDID that is stored in the Converter for
HDMI 1.3 from the factory. This pre-programmed standard EDID data structure
is compatible with most A/V display devices. All resolutions and audio formats
specified in this EDID will be passed to the source device. For a complete listing
of the resolutions and audio formats listed in this please see below.
Below are the settings programmed in MANUAL mode:
V
i
deo Resolution
:
Audio Format
:
Color S
p
ace
:
1080p
@
60Hz
1080p
@
50Hz
1080i
@
60Hz
(
native
)
1080i
@
50Hz
2-
c
h
a
nn
e
l
:
LP
C
M 2
CH
Mu
lti-
c
h
a
nn
e
l
:
LP
C
M 2
CH
LP
C
M
8CH
A
C
-
3
6CH
DT
S
7
CH
Dolb
y
Di
g
ital+ 8
CH
Dolb
y
T
r
ueHD
8CH
DT
S
-HD
8CH
M
A
T(MLP) 8CH
A
A
xvY
CC
7
09
xvY
CC
601

6
PANEL LAYOUT
Front Panel
Back Panel
5 6
1 2 3
48
7

7
PANEL DESCRIPTIONS
1 Power LED
When the LED is lit it shows that the unit is powered.
2 2.1 / 5.1 -7.1 / Bit Stream Switch
This enables the 3-way choice between 2.1, 5.1 and 7.1, and bit stream audio
(when in manual mode only) .
3 Mode Switch
This switch will toggle between MANUAL andAUTO modes. (See Page 5)
4 HDMI Input
Connect a Hi Def source device to this input port.
5 HDMI Output
Connect an HDMI cable to an HDTV display.
6 TOSLINK Optical Audio Output
Connect a TOSLINK (Optical) audio output here.
7 RCA 7.1 Surround-Sound Audio Output:
FR - The Front Right audio channel
FL - The Front Left audio channel
SUB - The low frequency Subwoofer audio channel
C - The Center audio channel
SR - The Side Right audio channel
SL - The Side Left audio channel
RR - The Rear Right audio channel
RL - The Rear Left audio channel
8 5V DC Power Input Receptacle
Using the power supply that was shipped with the unit use this to power the unit

8
SPECIFICATIONS
Digital Video Amplifier Bandwidth..............................................................225 MHz
Maximum Resolutions..............................................................1080p, 1920 x 1200
HDMI Input.....................................................................................1 x HDMI 19-pin
HDMI Output..................................................................................1 x HDMI 19-pin
Digital Audio output.............................................................................1 x TOSLINK
Analog Audio Outputs.................................................................................8 x RCA
Power Supply......................................................................................5V I 2.6A DC
Power Consumption.........................................................................13 Watts (max)
Operating Temperature..............................................................................0 - 40 °C
Dimensions..........................................................................10.25”W x1”H x 4.25”D
Shipping Weight...............................................................................................4 lbs

9
WARRANTY
Gefen warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen is notified within two (2)
years from the date of shipment, Gefen will, at its option, repair or replace the
equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifications. Equipment that fails under conditions
other than those covered will be repaired at the current price of parts and labor in
effect at the time of repair. Such repairs are warranted for ninety (90) days from
the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including
without limitation, any implied warranty or merchantability or fitness for any
particular purpose, all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from
Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their
original condition.
The information in this manual has been carefully checked and is believed to
be accurate. However, Gefen assumes no responsibility for any inaccuracies
that may be contained in this manual. In no event will Gefen be liable for
direct, indirect, special, incidental, or consequential damages resulting from
any defect or omission in this manual, even if advised of the possibility of such
damages. The technical information contained herein regarding the features and
specifications is subject to change without notice.
For the latest warranty coverage information, please visit Gefen’s Warranty web
page at http://www.gefen.com/kvm/aboutus/warranty.jsp
PRODUCT REGISTRATION
Please register your product online by visiting Gefen’s web site at
http://www.gefen.com/kvm/Registry/Registration.jsp

Rev A1
Pb
20600 Nordhoff St., Chatsworth CA 91311
1-800-545-6900 818-772-9100 fax: [phone]
www.gefentv.com [email protected]