Gembird GNS-5 User manual

лчиттничюнльтцию.
глтчн.Бзвыдны
www.sotmarket.ru
дбняинфмциятв,
тзывы,бзыиы
Инструкция
Gembird GNS-5
Перейти в карточку товара
8 800 775 98 98

Gigabit switch
Plastic 10/100/1000 Mbps N-Way switch

Gigabit switch
Disclaimer
We spared no efforts to make sure that the information in this manual is correct and
complete. However no liability is accepted for any errors or omissions. Gembird
Electronics reserves the right to change the specifications of the hardware and
software described in this manual without prior notice.
No part of this manual may be reproduced, transmitted or translated in any language
in any form, by any means, without the prior written permission of Gembird
Electronics Ltd.
Gembird Electronics makes no warranties for damages resulting from corrupted or
lost data due to a mistaken operation or malfunction of the product, the software,
personal computers or peripheral devices.
Gembird® is a registered trademark of GMB Tech (Holland) bv.
Other names or products not mentioned above may be registered trademarks or
trademarks of their respective owners.
Copyright © 2007 Gembird Electronics Ltd. All rights reserved.

Gigabit switch
Introduction
Thank you for buying the Gembird® desktop 10/100/1000 Mbps N-Way switch! This
manual will help you install and use it properly.
The 10/100/1000Mbps gigabit switch provides an excellent solution for expanding
your Gigabit network. Gigabit speed is 10 times quicker than 100Mbps Fast Ethernet
connection, enabling you to save time transferring bandwidth-intensive music, video,
photos, graphic, and data files.
By sharing the Internet, your users can check e-mail, browse the web, chat with
friends and family, and play online games using their own computer. To increase the
functionality of your network, you can also add other Ethernet-enabled devices such as a
print server, Network-Attached Storage (NAS), and Internet camera.
GNS-5(8) User manual

Gigabit switch
Features
Five/eight 10/100/1000BASE-T Gigabit Ethernet ports (RJ45 connectors)
Supports Auto-negotiation for 10/100/1000Mbps and duplex mode
Supports Auto-MDI/MDIX for each port
Supports Full/Half duplex transfer mode for 10/100Mbps, Full-duplex transfer
mode for 1000Mbps
Support Store-and-Forward switching method
Complies with IEEE 802.3, IEEE 802.3ab
Supports Wire-speed and non-blocking performance
Supports Hardware-based learning, and aging
Supports 8192 MAC addresses
Supports Broadcast and multicast storm control
Supports jumbo frame at all speeds (10/100/1000Mbps)

Gigabit switch
Specification
Storage temperature: -40~70°C
Operating temperature : 0 ~40°C
Storage humidity: 5~90% RH non-condensing
Operating humidity: 10~90% RH non-condensing
Package contents
10/100/1000Mbps gigabit switch
User manual
Power adapter 230VAC to 9VDC/1A

Gigabit switch
Front Panel LEDs
Power LED - this green indicator illuminates when the Switch is receiving power.
1-5(8) Indicators - this green indicator illuminates steadily when a port is connected to a
station successfully, If this green indicator is blinking, it indicates that a port is transmitting
or receiving data on the network.
Back Panel Features
Network ports and the power port are located on the back panel of the switch.
1-5(8) ports - these ports are connection points for PCs and other network devices, such
as additional switches.
Power - the power port is where you will connect the included power adapter.

Gigabit switch
Connecting Network Devices
To connect network devices to the Switch, follow these instructions:
Make sure all the devices you will connect to the Switch are powered off
Connect a Category 5/5e Ethernet network cable to one of the numbered ports
on the Switch
Note: Use Category 5e Ethernet network cables for your Gigabit connections.
Connect the other end to a PC or other network devices
Repeat steps 2 and 3 to connect additional devices
Connect the supplied power adapter to the power port on the Switch's back
panel
Note: Make sure you use the power adapter included with the Switch. Using a
different power adapter may result in damage to the Switch.
Plug the other end of the adapter into an electrical outlet
Power on the devices connected to the Switch. Each active port's corresponding
LED will light up on the Switch

лтззлюбым
дбнымбм
глтчня
лжбдджи
Дтвззв
вии
фмлнидит
нлнз2минты
мнииДтвилтвинитзывыцииииди
Gembird GNS-5
Описание