Genee 56" User manual

GENEE TECHNOLOGIES
INDIA PRIVATE LIMITED
An ISO 9001:2008 certied company
Classroom for the Future
Classroom for the Future
WWW
@
Tel: [phone]
Fax: [phone]
Email: [email protected]
Website: www.genee-india.com, www.geneeworld.com
Plot No. 698, Udyog Vihar, Phase V, Gurgaon, Haryana-122016, India User manual
Model: 56”/78”/88”/105”

2 3
Table of Contents
What’s In The Box.................................................3
System Requirements.............................................3
Introduction..........................................................4
Software Features..................................................5
How to Install Hardware.........................................6
How to Install Software.........................................9
How to Use Annotation Software...........................15
Troubleshooting Guide..........................................15
Interactive Whiteboard User Tips..........................17
Specifications.......................................................18
What’s In the Box
Thank you for your purchase of the Interactive whiteboard. If any items are missing
or damaged, please contact your authorized reseller immediately.
CONTENTS:
White Board * 1 pc Writing Pen *1 pc
USB Cable 24 ft (7.5m) * 1 pc Erase * 1 pc
Installation CD * 1 pc Floor Stand (Optional) *1 set
Warranty Card * 1 pc Castor (Optional) * 1 set
Pen Tray (Optional) * 1 pc Wall-mounting Bracket (Optional) * 1 set
System Requirements
Lowest Environmental Requirements:
· CPU: 300MHz×86
· Memory: 128M
· Display Card: Support 256 or above
· Hard Disk: 100M
· Screen Display Resolution: 800×600、1024×768、1280×1024
· USB1.1 port
Recommended:
· CPU: 1GHz×86
· Memory: 256M or above
· Display Card: Support 256 or above
· Hard Disk: 500M
· Screen Display Resolution: 1024×768 、1280×1024
· USB port
Software Running Environment: Microsoft Windows 2000/XP/VISTA

4 5
Introduction
The Interactive whiteboard uses infrared technology. Working seamlessly with a
projector and computer, the Interactive whiteboard provides more convenient,
interactive and effective presentations. Perfect for school auditoriums, conference
rooms, trade shows, symposiums and lecture halls. Users can write on the screen
using the included pens, wand or the user’s finger.
Note: The projection area is outlined at the upper left and lower right corner of
the board using these icons（“ ”）. Please project onto this area for best results.
- Writing: Write, draw and perform mouse functions with your finger. The
whiteboard displays your penmanship instantaneously.
- Annotating: The user can operate and annotate over any computer applica-
tions, or save notes directly into Flow! Software, including PowerPoint, Word,
Excel, MEPG JPEG, AVI and etc.
- Interacting: In video conferencing, both parties can share data and write in
real time just like a standard conference room. Once integrated with Polycom
or other video conferencing systems, using Interactive whiteboard can improve
video conference results and efficiency. The system can support up to 40 writ-
ing locations.
- Touch System: The Interactive whiteboard is sensitive to pressure and can
be used as a high-resolution interactive white board.
- Touch Recognition: Can recognize touch of a single-finger, multi-finger,
right-click, left-click and double click.
- Hot Keys: Hot keys located on opposite ends of the boards provide quick
access to frequently used keys.
- Energy conservation: Controls energy cost within 0.5W. No need for addi-
tional power supply.
Software Features:
- Designed for teaching and conference systems.
- The screen display is high light and low glare.
- Saves images in Vector image format.
- Vector images take up less storage space and makes file transferring easier
and faster
- Users can customize pen type, line width, and color schemes to fit their
individual preferences.
-Powerful screen functioning supports real-time editing
-Graphic tools allow users to choose a background, input graphics and
images.
-Paintbrush pen is pressure sensitive
-Writing file allows for easy conversion to many other formats such as: PDF,
JPG, GIF, PNG, TIFF, BMP, etc.
- Graphic tools and Hot Keys allow users to choose a pen to annotate, or use
as a mouse control. The 12 Hot Keys function as: Page Up & Down, Insert
White Background, Insert Black Background, Select Pen Size, Eraser, Save
and Cancel.
- Supports other application software.

6 7
How to Install Hardware
1. Install Securing Pen Tray:
In the frame of the board, prior to securing the pen tray you will find a slot that
accommodates a Kensington lock. If you would like to use a Kensington lock insert
and loop the cable through the center hole on the frame, position the pen tray in
line with the four screws, then screw the pen tray in place. (shown below)
2. Install Wall-mounting:
Set desired height according to user’s preferences. Using the wall-mounting brack-
ets as a template, place the 8 stilettos on the wall and screw bolts into each hole.
Align the wall-mounting brackets onto the bolts and tighten the bolts. Check that
each location hole faces each corresponding bolt and hang the white board to the
wall. (as shown below)
Graph (a)
Graph (b)

8 9
How to Install Software
1. Install Software
Connect the whiteboard to your computer or laptop using the provided USB cable
and insert the Interactive whiteboard CD. Once the USB cable is connected the
computer will notify that it has “found new hardware” and the following window will
appear:
Pease click “Cancel” and use the following method to install the application soft-
ware. Once the Interactive whiteboard CD is placed in the computer’s CD-ROM, the
auto run install window will appear.
Click Whiteboard Software to begin installation
3. Install White Board on a Floor Stand:
(1) Lock all four casters in the down position (as shown)
With an assistant’s help, hang Interactive whiteboard on the floor stand by
lowering the two bolts onto the top hooks and securing the bottom bolts into the
bottom hooks. There are two heights for hanging according to user’s preferences.（
as shown below）

10 11
indicates no connection has been made, please check the hardware connection
and USB driver.
Note:
Under Windows XP, the USB driver may need to be reinstalled if the connection to
another USB port. Please press “Next” to search USB driver automatically.
Double-click on the icon to populate the options menu.
‘About’ Option
The dialog box displays application software copyright date, edition and hardware
information.
Follow the prompts in the dialog box messages to complete the installation.
Double-click on the Microsoft DirectX9.0 to install Direct X9.0
Follow the prompts to install DirectX9.0. Once the installation of the DirectX and
whiteboard Setup is complete, click ‘Yes” to restart your computer.
Once the software is installed an icon will appear in the computer’s windows system
tray. indicates a connection has been made to the whiteboard,

12 13
‘Setup’ Option
System setup is used to set the simulation of mouse’s right-click and double-click
based on user’s preferences.
To Simulate Right-click:
The pen will function as a mouse right-click when the pen tip stops on the screen
more than 1500 milliseconds (right-click time) and moves a distance less than 20
pixels (response time).
To Simulate Double-click:
The pen will function as a double-click on the screen when two consecutive clicks
occur in less than 200 milliseconds (double-click time) and in position less than 20
pixels (response area) from one another.
Calibrating
Users can calibrate image if the projected touch point is offset from actual contact
location. To calibrate, click ‘Calibrate’ on the options menu then click ‘Start’ Using
the Interactive whiteboard white dots will appear on the screen, to orient the pro-
jected image on the board, follow the on screen instructions by clicking on the
white dot each time it appears on the screen. The orientation data saves in the
Interactive whiteboard software automatically and remains unchanged until you the
next time you calibrate.
Exit Driver Software
When the Interactive whiteboard is no longer needed, click”Exit” to exit the pro-
gram. The whiteboard software can be reopened from the start menu.
Note: There are three situations of whiteboard connection errors
shows the White Board is not connected properly
shows the White Board is in the process of connecting
shows the White Board is connected properly

14 15
How to Use Annotation Software
Please refer to the <Application Software Instruction> on the CD for details.
Troubleshooting Guide
2. Hot Keys
There are twelve hot keys on the right and left hand sides of the board.
Note: Only available on 78-inch and 105-inch models, 56-inch and 88 inch model
whiteboard only has hot keys on the left hand side. The functions are listed below:
Writing pens and eraser
There are three colored writing pens and one eraser, red, black, and blue. The
writing pen can write with the same color or users can choose a different color from
the color palette in the software.
Writing with single-finger, moving with multi-finger.
★
Problem Reason Try the following
The whiteboard driver is not
stalledin
Install/reinstall the driver by run
in windows START menu
Connection Failure between the
computer and the whiteboard Retry the connection
icon appears
on the task bar at
the lower right of
screen
Installation error Restart computer and reinstall
software
The stroke color is the same or
similar to the background Reset the stroke color
Hands and/or some objects on
screen Remove all objects
The writing content
cannot be
displayed on the
screen White Board software does not
started Start the software
The blue indicator
on whiteboard does
not light up
USB error Reconnect USB cable or change
cable
The whiteboard driver is not
installed
Install/reinstall the driver by run
in windows START menu
The blue indicator
on the whiteboard
does not light up or
is always flash
USB port error Retry connection using another
USB port
USB cable failure Change USB cable

16
17
Frequently Asked Questions
Why isn’t anything showing up on the screen?
The selected stroke color may be the same as or similar to the background
color. Please change the stroke color and try again. Otherwise, the pen may
not be working properly. Please contact your reseller immediately.
Do I have to run calibration after reinstalling the application software?
No. To keep it simple, the system records your last location adjustment
parameters.
Is the object covered by the page sorter window really covered?
The object is only covered by the page sorter window temporarily and it will
be shown after the page sorter window is closed.
Can I custom define a page background and color?
Yes, please refer to Setup Page Background.
How do I know if my white board is working properly?
If the red indicator is shining while writing on the screen, the White Board
Pen works properly.
Why cannot the teaching page color be displayed?
The background color will be covered by the image if the background image
size is larger than the screen resolution size and the image is not transparent.
：
：
：
：
：
：
Interactive Whiteboard User Tips
When searching for a specific page among many pages, enter the Page Index mode
and look up this page quickly on the Page Sorter window.
Press the Ctrl+ key combination ( ) to move/place objects accurately.
To improve the displaying speed, the size of the image in use should be no larger
than the size of the screen resolution.
If possible, convert the picture that will be inserted into WMF format first. This
operation can improve the displaying speed and reduce distortion when magnifying
or shrinking the image.
In order for the image to be displayed on the screen clearly, set the image size to
the same size as the screen being displayed. For example: If the screen resolution
is 1024×768, the image pixel should be set to 1024×768.
、 、

18 19
Specifications
56" Interactive Whiteboard
Technology Infrared
Touch System Pen, Wand or Finger
Touchable range 46" x 33" (1159mm x 831mm)
Resolution 4096 x 4096
Response Time First dot:25ms,continuous dot:8ms
Cursor Speed 120 inches/second
Coordinate Accuracy 3mm
Consumer Current Active
Area Size (Diagonal) ＜100mA 56"
Port USB
Dimensions 52" x 38" (1331mm x 971mm)
Packing Dimensions 55" x 43" x 8" (1400 x 1100 x 200mm)
Net Weight 31 lbs (14kg)
Gross Weight 48 lbs (22kg)
Software Drivers Windows 2000/XP/32 bits vista
Accessories Standard: 3 Interactive Pens (red, black,
blue), Eraser, Pen Tray
Optional: Floor Stand
Operating Temp 5°F to 95°F (-15°C to 35°C)
Operating Humidity 20~90%
Storage Temp -40°F to 122°F (-40°C to 50°C)
Storage Humidity 10~95%
78" Interactive Whiteboard
Technology Infrared
Touch System Pen, Wand or Finger
Touchable range 64" x 45" (1631mm x 1139mm)
Resolution 4096 x 4096
Response Time First dot:25ms,continuous dot:8ms
Cursor Speed 120 inches/second
Coordinate Accuracy 3mm
Consumer Current Active
Area Size (Diagonal) ＜100mA 78"
Port USB
Dimensions 72" x 51" (1824mm x 1301mm)
Packing Dimensions 80" x 60" x 8" (2040 x 1520 x 200mm)
Net Weight 57 lbs (26kg)
Gross Weight 75 lbs (34kg)
Software Drivers Windows 2000/XP/32 bits vista
Accessories Standard: 3 Interactive Pens (red, black,
blue), Eraser, Pen Tray
Optional: Floor Stand
Operating Temp 5°F to 95°F (-15°C to 35°C)
Operating Humidity 20~90%
Storage Temp -40°F to 122°F (-40°C to 50°C)
Storage Humidity 10~95%

20 21
88" Interactive Whiteboard
Technology Infrared
Touch System Pen, Wand or Finger
Touchable range 71" x 51" (1796mm x 1303mm)
Resolution 4096 x 4096
Response Time First dot:25ms,continuous dot:8ms
Cursor Speed 120 inches/second
Coordinate Accuracy 3mm
Consumer Current Active
Area Size (Diagonal) ＜100mA 88"
Port USB
Dimensions 78" x 58" (1988mm x 1465mm)
Packing Dimensions 80" x 66" x 8" (2204 x 1684 x 200mm)
Net Weight 66 lbs (30kg)
Gross Weight 88 lbs (40kg)
Software Drivers Windows 2000/XP/32 bits vista
Accessories Standard: 3 Interactive Pens (red, black,
blue), Eraser, Pen Tray
Optional: Floor Stand
Operating Temp 5°F to 95°F (-15°C to 35°C)
Operating Humidity 20~90%
Storage Temp -40°F to 122°F (-40°C to 50°C)
Storage Humidity 10~95%
105" Interactive Whiteboard
Technology Infrared
Touch System Pen, Wand or Finger
Touchable range 79" x 45" (2013mm x 1139mm)
Resolution 4096 x 4096
Response Time First dot:25ms,continuous dot:8ms
Cursor Speed 120 inches/second
Coordinate Accuracy 3mm
Consumer Current Active
Area Size (Diagonal) ＜100mA 105"
Port USB
Dimensions 91" x 51" (2317mm x 1301mm)
Packing Dimensions 99" x 59" x 7" (2522 x 1500 x 170mm)
Net Weight 66 lbs (30kg)
Gross Weight 88 lbs (40kg)
Software Drivers Windows 2000/2003/XP
Accessories Standard: 3 Interactive Pens (red, black,
blue), Eraser, Pen Tray
Optional: Floor Stand
Operating Temp 5°F to 95°F (-15°C to 35°C)
Operating Humidity 20~90%
Storage Temp -40°F to 122°F (-40°C to 50°C)
Storage Humidity 10~95%