Geneq GE4650-000 User manual

Digital Thermometer
with Internal & External temperature probes
GE4650-000
Digital thermometer for monitoring refrigerators, freezers, water baths, heating
blocks and incubators.
SPECIFICATIONS:
Measurement range -50°C ~ +70°C or -58°F ~ +158°F
Accuracy ±1°C or ±1.8°F in the range of -20°C ~ +70°C
Resolution 0.1° for whole range
FEATURES
∑Internal/External temperature display
∑Temperature Unit °F/°C Selectable
∑MAX/MIN (°F/°C) Memory recalling function
∑Time setting
∑Time alarm/Snooze Setting
∑12/24 Hour Format
∑3meters Sensor Wire with Probe for fridge
inside Temperature Measurement
∑Flip Out Stand at Back of Unit
∑Battery: 1 x 1.5 volts "AAA" size
∑Comes with calibraon cerficate

DIGITAL THERMOMETER MODEL CC4650-000 INSTRUCTIONS
SPECIFICATIONS
Measurement range: -50°C ~ +70°C or -58°F ~ +158°F
Accuracy: ±1°C or ±1.8°F in the range of -20°C ~ +70°C
Resoluon: 0.1° for whole range
OPERATION
Open the baery door, insert baery into compartment. Close the baery door. The unit is ready for use now
-°F°C: Press ''F/C'' AT THE BACK OF THE CC4650-000 to select desirable temperature unit.
-Maximum and Minimum Memory Recalling Funcon
1- Press "MAX/MIN" to recall minimum temperature. MIN sign shows on the display.
2- Press again to recall maximum temperature when necessary. MAX sign shows on the display.
3- Unit restores to real me temperature mode automacally aer 5 seconds.
4- Press and hold for 3 seconds to clear all maximum and minimum reading at once
-Time Seng
1- Press "SET" for 3 seconds to enter me seng mode. Digits at the lowest row flash.
2- Press "HOUR", and "MINUTE" respecvely to adjust desired me.
3- Press "SET” to return to real me mode. Or unit returns to real me mode automacally
aer 5 seconds.
-Alarm/Snooze Seng
1- Press "AL/SNZ" and hold unl AL sign appears. And 0:00 (HH:MM) or last seng shows.
2- Press "HOUR", and "MINUTE" respecvely to adjust desired alarm me.
3- Press "AL/SNZ" again to acvate the alarm and sign appears. The alarm is on only when sign appears.
4- Press "AL/SNZ" again to acvate the snooze and SNZ sign appears. The snooze is on only when SNZ sign appears.
5- Press "SET aer Seng desired alarm me. Or unit returns to real me mode automacally aer 5 seconds.
6- When the set alarm me reaches, sign flashes and the alarm sound will last for 1 minute.
7- Press any key to stop the alarm.
8- When the snooze is on, SNZ sign flashes and the alarm sound will last for 1 minute aer 10 minutes of
alarm me. The snooze sounds will repeat 5 mes.
9- To turn off the alarm, press "AL/SNZ" and hold unl AL and sign appear. Press "AL/SNZ" again and
sign disappeared. The alarm is off when sign disappeared.
-12/24 Hour Format
Press'"12/24" to select desired me format.
-NOTE: THIS THERMOMETER HAS NO TEMPERATURE ALARMS. IF YOU NEED, PLEASE, SEE OUR MODEL
CC4648-000