Generac Power Systems PWRcell X7600 Series User manual
SAVE THIS MANUAL FOR FUTURE REFERENCE
Owner’s Manual
Generac PWRcell™ Inverter
(000209b)
WARNING
Loss of life. This product is not intended to
be used in a critical life support application.
Failure to adhere to this warning could result
in death or serious injury.
Serial Number Locations
(000393a)
WARNING
CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov.
Section 1: Introduction and Safety
Section 2: General Information
Section 3: Operation
Section 4: Maintenance
Section 1: Introduction and Safety
www.generac.com
(000001)
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
(000002)
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
(000003)
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
www.generac.com
(000100a)
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Automatic start-up. Disconnect utility power and
render unit inoperable before working on unit.
Failure to do so will result in death or serious injury.
(000191)
DANGER
WARNING
Risk of injury. Do not operate or service this machine
if not fully alert. Fatigue can impair the ability to
service this equipment and could result in death or
serious injury. (000215)
(000209b)
WARNING
Loss of life. This product is not intended to
be used in a critical life support application.
Failure to adhere to this warning could result
in death or serious injury.
(000598)
WARNING
Equipment damage. Connect only to REbus-compatible
devices to the DC bus. Never connect to any other DC
power source. Connecting to other DC power sources
could result in equipment damage.
(000155a)
WARNING
Electric shock. Only a trained and licensed electrician
should perform wiring and connections to unit. Failure
to follow proper installation requirements could result in
death, serious injury, and equipment or property damage.
(000182a)
WARNING
Equipment damage. Only qualified service personnel may
install, operate, and maintain this equipment. Failure to
follow proper installation requirements could result in death,
serious injury, and equipment or property damage.
•
•
•
•
•
•
(000104)
DANGER
Electrocution. Water contact with a power
source, if not avoided, will result in death
or serious injury.
(000604)
DANGER
Electrocution. PWRcell Battery front cover should be
removed by a qualified technician only. Removing
the front cover could result in death, serious injury,
equipment or property damage.
(000145)
DANGER
Electrocution. In the event of electrical accident,
immediately shut power OFF. Use non-conductive
implements to free victim from live conductor. Apply
first aid and get medical help. Failure to do so will
result in death or serious injury.
(000599)
Electrocution. Turn battery disconnect OFF and
de-energize REbus before touching terminals.
Failure to do so will result in death, serious injury,
equipment and property damage.
DANGER
(000152)
DANGER
Electrocution. Verify electrical system is
properly grounded before applying power.
Failure to do so will result in death or serious
injury.
(000188)
DANGER
Electrocution. Do not wear jewelry while
working on this equipment. Doing so will
result in death or serious injury.
(000187)
WARNING
Electrocution. Potentially lethal voltages are generated
by this equipment. Render the equipment safe before
attempting repairs or maintenance. Failure to do so
could result in death or serious injury.
(000600)
DANGER
Electrocution. Initiate a system-wide safety shutdown
and turn PWRcell Disconnect Switch OFF on all
connected batteries before performing service. Failure
to do so will result in death, serious injury, equipment
and property damage.
Figure 1-1
REbus Inverter
Internet
Shutdown
(hold)
Figure 1-1. Safety Shutdown Button (Located on
Inverter Control Panel)
•
•
•
•
Section 2: General Information
Specifications are subject to change without notice. Refer to the product specification sheet for complete list.
Figure 2-1
Table 1: Generac
PWRcell Inverter Important Information
Figure 2-1. Serial Number Location
B
A
C
Figure 2-2. Unit Dimensions
www.generac.com
Figure 2-3
Figure 2-3. Generac PWRcell System Example
Figure 2-4. Component Locations
REbus Inverter
Internet
Shutdown
(hold)
Figure 2-5. Inverter Control Panel
Figure 2-5
Figure 2-5
•
•
•
•
•
•
•
•
Safety Shutdown
Ethernet Configuration
Table 2-1Table 2-2
Figure 2-6
Figure 2-7
Figure 2-6. Clean Backup (1 of 3)
Figure 2-7. Clean Backup (2 of 3)
Figure 2-8
Figure 2-8. Clean Backup (3 of 3)
Figure 2-9
Figure 2-9. Priority Backup (1 of 2)
Figure 2-10
Figure 2-10. Priority Backup (2 of 2)
Figure 2-11
Figure 2-11. Self Supply (1 of 3)
Figure 2-12
Figure 2-12. Self Supply (2 of 3)
Figure 2-13
Figure 2-13. Self Supply (3 of 3)
Table 2-3: Self Supply Setpoints
•
•
•
•
•
•
•
Section 3: Operation
Figure 3-1
REbus Inverter
Internet
Shutdown
(hold)
Figure 3-1. Inverter Control Panel
Figure 3-2
Figure 3-2. Home Screen
Figure 3-3
Figure 3-3. Selecting Operational Modes (1 of 4)
Figure 3-4
Figure 3-4
Figure 3-4. Selecting Operational Modes (2 of 4)
Figure 3-5
Figure 3-5. Selecting Operational Modes (3 of 4)
Figure 3-6
Figure 3-6. Selecting Operational Modes (4 of 4)
Figure 3-7
Figure 3-7. Device Pages
(000600)
DANGER
Electrocution. Initiate a system-wide safety shutdown
and turn PWRcell Disconnect Switch OFF on all
connected batteries before performing service. Failure
to do so will result in death, serious injury, equipment
and property damage.
(000627)
DANGER
Electrocution. Never enable any device during an
installation or while wires are exposed. Doing so
could result in death, serious injury, equipment or
property damage.
Figure 3-8
Figure 3-8. Enabling and Disabling Devices (1 of 3)
Figure 3-9
Figure 3-9. Enabling and Disabling Devices (2 of 3)
Figure 3-10
Figure 3-10. Enabling and Disabling Devices (3 of 3)
Table 3-4
Figure 3-11
Figure 3-11. Internet Device Page
Figure 3-12
Figure 3-12. Mod. Settings Menu (2 of 3)
Figure 3-14
Figure 3-13. Mod. Settings Menu (3 of 3)
Figure 3-14. Mod. Settings Menu (3 of 3)
Figure 3-15
REGISTER YOUR SYSTEM
Go to
https://register.generac.com/
to register
or scan the code above.
SERIAL NUMBER:
REGISTRATION CODE:
PEEL AWAY
XXXXX-XXXXX
RRRR-RRRR
Figure 3-15. Serial Number and Registration
Section 4: Maintenance
(000628)
DANGER
Electrocution. Activate safety shutdown before
performing emergency or service work. Failure to
do so could result in death, serious injury,
equipment or property damage
(000629)
DANGER
Electrocution. Only an authorized technician should
attempt to service this equipment. Failure to follow
proper service requirements could result in death,
serious injury, equipment or property damage
Component Locations
Enabling and Disabling
Devices
www.generac.com
Other manuals for PWRcell X7600 Series
2
This manual suits for next models
1
Table of contents
Other Generac Power Systems Inverter manuals
Generac Power Systems
Generac Power Systems QuietSource 004917-5 Installation instructions
Generac Power Systems
Generac Power Systems PWRcelP XVT076A03 Installation instructions
Generac Power Systems
Generac Power Systems SG050 User manual
Generac Power Systems
Generac Power Systems Air-cooled Recreational Vehicle Generator... User manual
Generac Power Systems
Generac Power Systems Guardian 005324-0 User manual
Generac Power Systems
Generac Power Systems Magnum MGG100M User manual
Generac Power Systems
Generac Power Systems 1470-0 User manual
Generac Power Systems
Generac Power Systems 00941-4 Service manual
Generac Power Systems
Generac Power Systems 004270-1 Quietpact 75D User manual
Generac Power Systems
Generac Power Systems CorePower?/ES Generators Instruction sheet
Generac Power Systems
Generac Power Systems GUARDIAN 04136-0 User manual
Generac Power Systems
Generac Power Systems 0940-1 Installation instructions
Generac Power Systems
Generac Power Systems 8 kW LP User manual
Generac Power Systems
Generac Power Systems 8 KVA User manual
Generac Power Systems
Generac Power Systems QUIET TEST 5418 User manual
Generac Power Systems
Generac Power Systems 00941-3 Service manual
Generac Power Systems
Generac Power Systems 4000XL 9777-2 Administrator Guide
Generac Power Systems
Generac Power Systems 20 kW Synergy User manual
Generac Power Systems
Generac Power Systems Quietsource 004917-3 User manual
Generac Power Systems
Generac Power Systems 5240 Installation instructions
Popular Inverter manuals by other brands
Ampt
Ampt V600-13.5-13.5 installation manual
Xantrex
Xantrex XPower Inverter 3000 installation guide
NSM
NSM KR 80 Use and maintenance manual
King Canada
King Canada power force KCG-3000i instruction manual
Jefferson Professional Tools & Equipment
Jefferson Professional Tools & Equipment JEFGENDIEWEL180 user manual
SamplexPower
SamplexPower SA-150-112 user manual
Power Electronics
Power Electronics SD700 Series Programming and Software Manual
SolarV
SolarV EPEVER UPower-Hi Series user manual
SMA
SMA Sunny Boy SB 2500 installation manual
V-TAC
V-TAC 11583 instruction manual
Siemens
Siemens SINAMICS G120P Technical manual
Growatt
Growatt NEO 1200-2000M-X Quick installation guide