Generac Power Systems Transfer Switches and Accessories User manual

PORTABLE GENERATORS
AUTOMATIC STANDBY GENERATORS
TRANSFER SWITCHES AND ACCESSORIES
PRODUCT CATALOG
STANDBY
GENERATORS
RESIDENTIAL
COMMERCIAL
LIGHT
INDUSTRIAL

2
life is better
with power
Better Power
More Choices
We may not realize how much we depend on power in our daily lives. Heating,
cooling, refrigeration, and lighting are necessities homes and businesses depend
on. Job sites, campsites and special events use equipment requiring power
where it may not be readily available. With extensive lines of both portable and
automatic standby generators, Generac has comprehensive power solutions to
cover any situation.
Automatic Standby Power
24/7 power protection from damaging power outages
Unexpected power outages have become more frequent, with causes ranging
from severe weather to an overtaxed power grid. With homes incorporating more
electrical priorities, loss of power is a hassle easily solved with a flashlight and
blanket. A power outage in winter can result in the loss of heat and burst pipes. In
warm weather climates, a power outage can result in the loss of air conditioning
and mold damage. In any climate, food left in refrigerators or freezers is likely to
spoil. Businesses must shut down and consequently lose revenue.
These are significant issues for home and business owners with expensive
consequences. Luckily, they can be avoided. With sizes ranging from 8 kW to
150 kW, Generac offers the broadest generator line in the industry. You can back
up only the circuits you consider necessary or your entire home or business with
24/7 power protection. Protect the things that matter most to you with Generac –
no other name in the industry compares.
Portable Power
Power to go wherever you need it
The flexibility of portable power opens up unlimited possibilities. Always have
a ready power supply for appliances on your camping trip, electric tools at
the job site or unexpected home emergencies. Generac's general purpose GP
and professional grade XP portable generator lines offer options for recreation,
work or home. With sizes up to 17,500 Watts, you can take your power with you
wherever you need it.
STANDBY GENERATORS

3
Whole-House Protection
Generac offers air-cooled and liquid-cooled generators that can supply up to
whole-house protection. In conjunction with a transfer switch, this application
completes your power solution package (see page 8 for options).
To accurately size liquid-cooled generators, a licensed electrician should apply
an Amp meter to the circuits and appliances to determine the load requirement
for back up.
Sizing Guide
Note: Warranty coverage is not
available for generators that are
used for prime power (main power
source) in place of the existing
utility power where utility power is
present or in place of utility power
where utility power service does
not normally exist. For life support
or critical care applications, please
see page 6 for industrial units.
Air Cooled Generator 8 kW 10 kW 14 kW 17 kW Circuits 20 kW
5-Ton Central Air
1 
(50 Amp / 240V)
2
4-Ton Central Air
1 
(40 Amp / 240V)
2
3-Ton Central Air
1•
(30 Amp / 240V)
2
Well Pump or Water Heater

(20 Amp / 240V)
2
Family Room
 
(20 Amp / 120V)
Master Bedroom

(20 Amp / 120V)
Home Office
 
(20 Amp / 120V)
Media Room

(20 Amp / 120V)
Garage
 
(20 Amp / 120V)
Kitchen (#1)
3 
(20 Amp / 120V)
Kitchen (#2)
3
(15 Amp / 120V)
Bathroom

(15 Amp / 120V)
Furnace

(15 Amp / 120V)
Sump Pump
 
(15 Amp / 120V)
Bedroom (#2)
  
(15 Amp / 120V)
Bedroom (#3) (15 Amp / 120V)
Bathroom (#2)

(15 Amp / 120V)
1Check your air conditioner’s starting requirements. Starting requirements for older and/or less efficient equipment may exceed
recommended generator capability. Additionally, for any electrical equipment or appliances, always check the manufacturer’s
power requirements. This will help to ensure standby power accommodations for items that cycle during operation.
2 240 volt appliances require 2 circuits 3Most kitchens require multiple circuits
•For smaller central air up to 2 tons
Note: Rooms and appliances indicated here are for example only. You may choose others that better reflect your needs. Because of the
cycling nature of some appliances such as refrigerators and furnaces, it may not be possible for all appliances to run simultaneously.
Whole-house Protection
HOW MUCH POWER DO YOU NEED?
TRANSFER SWITCH
CONFIGURATIONS
RTS-N models
RTS-E models
RTS-S models
200AMPLOADSHEDDING
AUTOMATICTRANSFERSWITCH
UTILITYSERVICEDISCONNECTINSIDE
NEMA3R-INDOOR/OUTDOORRATED
Automatic Transfer Switch Basic
1
2
3
4
5
6
7
8
9
10
Automatic Transfer Switch Basic is rated
NEMA 1. All RTS-N, RTS-E & RTS-S
transfer switches are NEMA 3R (outdoor/
indoor) rated.

4
8-17 kW
17-20 kW
8 KW / 10 KW / 14 KW / 17 KW MODELS (STEEL)
Air-cooled models for essential circuit protection
Continuous Fuel:
All models run on LP gas or natural
gas, providing continuous power with reduced emissions.
Circuit Coverage: Individual models can protect
8, 10, 12, 14, or 16 circuits in your home.
True Power™ Technology for sensitive electronics:
10-17 kW units feature an electronic governor for smooth and consistent output with less
than 5% total harmonic distortion for sensitive electronic equipment and appliances.
Steel Enclosures: All steel enclosures feature durable galvanneal finish which bonds
zinc to steel for superior rust and corrosion protection.
Composite Mounting Pad: Provides for easier installation.
UL Listed: UL 2200 Listing ensures the generator meets local building code approval,
safety and certified kW power ratings.
External Dual GFCI Outlet: Easy access to power for outdoor equipment available on
17 kW model.
2year
oil change
interval
17 KW AND 20 KW MODELS (ALUMINUM)
The quietest and most powerful air-cooled
protection on the market
These larger air-cooled models are the quietest and most
powerful generators of their size on the market today. The
20 kW model includes the base fascia for a finished look
and thorough protection from debris and rodents. They
include all the features of the 8-17 kW models above as
well as the following:
Quiet-Test™: The patented Quiet-Test low-speed
exercise mode for up to 50% quieter weekly self-test.
Increased Circuit Coverage: The 20 kW model
provides up to whole-house protection.
Aluminum All-Weather Enclosures: All-weather corrosion resistant
aluminum enclosures prolong the life and look of the generator. Ideal for
salt air coastal communities.
External Dual GFCI Outlet: Easy access to power for outdoor equipment.
Engine horsepower strength:
Generac OHVI®(Overhead
Valve Industrial) engines
are specifically designed for
generator demands. The 2-year
oil change interval, full-pressure
lubrication system and spin-on
oil filter contribute to the longest
running engine in the industry.
AIR-COOLED 8 – 20 KW
Control Panel for
10 - 20 kW air-cooled generators
The easy-to-use control panel
features user-friendly LCD digital
controls, providing bilingual plain
text display.
GENERAC AIR-COOLED MODELS
America’s #1 selling home standby generator
Generac air-cooled models feature Generac’s OHVI industrial
engines for reliability and long life, and plateau honing to
significantly decrease service intervals.
Smaller air-cooled models provide essential circuit
protection for small to medium sized homes.

5
70-150 kW
22-60 kW
QT SERIES
The quiet standard in liquid-cooled
automatic standby power
Generac’s QT Series generators have redefined backup
power for larger residential and commercial applications.
These models feature automotive grade liquid-cooled
engines for proven power and performance.
With outputs ranging from 22 to 150 kW, these QT models feature:
•Quiet-Test™: All models feature the patented Quiet-Test low-speed exercise mode
for quieter weekly self-test.
• DurableEnclosures:
– Steel enclosures have a galvanneal paint finish which bonds zinc to steel
for superior rust and corrosion protection.
– Aluminum enclosures are corrosion resistant and ideal for salt air
coastal conditions.
•ContinuousFuel: All models run on LP gas or natural gas, providing continuous
fuel and reduced emissions.
•StableOutput: Clean, consistent power for sensitive electronics. UL Listed.
•TransferSwitches: Matching transfer switches sold separately. Rated from 100 to
800 Amps. See page 8.
22 KW – 60 KW MODELS
Ideal for many large residential and commercial
applications. A perfect size for small office
buildings, churches, municipal buildings,
retail centers, police stations, schools, farms,
convenience stores and restaurants.
70 KW – 150 KW MODELS
A superior solution for applications that require more
sophisticated monitoring and diagnostic capabilities.
Applications range from supermarkets and pumping
stations to strip malls and hotels.
LIQUID-COOLED 22 – 150 KW
R-Series Controller for
22-60 kW Liquid-cooled
generators
Full system monitoring including
LED indicators for safety
shutdowns, fuel pressure and
battery voltage. Integrated
transfer switch controller for RTS
transfer switch.
H-100 Controller for 70 kW
and above Liquid-cooled
generators:
Offers quick access and
simultaneous monitoring of key
generator functions. Integrated
transfer switch controller for
HTS transfer switch.

Natural gas is delivered reliably
and continuously underground.

Spark-ignited engines start more
easily than diesel engines in cold
climates. Spark-ignited engines
are also quieter in terms of noise,
vibration and harshness.

Natural gas demand drops
significantly during a power
outage, assuring more than
adequate supply.

Gaseous fueled engines emit fewer
pollutants than other fuels and are
more environmentally friendly.
Quiet-Test™ feature:
Reduces noise by lowering engine
speed during the generator’s
weekly self-test cycle. The ultra-
quiet sound level is comparable
to a car at idle, up to 50% quieter
than when the generator is
operating under normal load.
ADVANTAGES OF GASEOUS FUEL

6
INDUSTRIAL POWER FROM GENERAC’S
MODULAR POWER SYSTEMS
For applications requiring greater amounts of standby
power, the MQT100 and MQT150 models are ideal.
Available through your local Generac Industrial
Dealer, the output of these gensets can be combined
to form a Generac Modular Power System (MPS).
MQT Series Modular Power Systems are building
blocks that link together to combine the power output
equal to one large single generator. With the ability to
parallel up to ten 100 kW units or up to ten 150 kW
units, these generators can satisfy higher end
requirements ranging from 100 to 1500 kW.
Redundancy
Because each MQT generator within the system backs up the others, critical loads receive
extra protection and building managers enjoy greater peace of mind.
Serviceability
MQT generators use modified high volume truck or industrial engines that can be serviced
using readily available, cost-effective parts. Since each generator backs up the others,
servicing can be accomplished without losing backup power to critical loads.
Scalability
A Generac Modular Power System can be expanded as facilities grow. There is no need
to replace the system if future power requirements exceed projections and no need to
over-spend on a larger system that might never be fully utilized.
Flexibility
MPS modules provide unmatched flexibility because they can be placed in any configuration
side by side, end to end, together or apart. They are light enough for most rooftop
applications and the lower weight eliminates the need for heavy-duty cranes and material
handlers during installation.
THE GENERAC
INDUSTRIAL DEALER
NETWORK
Installation, start-up and servicing of
Modular Power Systems require
specialized knowledge and expertise.
Generac Industrial Dealers have
factory-trained personnel to ensure
that your customers get the best
possible solution, fast delivery,
professional installation and start-up.
If a customer needs a diesel-powered
generator or a generator size that is
beyond the scope of the QT Series
line, a Generac Industrial Dealer can
meet requirements up to 9,000 kW.
Generac Industrial Dealer certified
service technicians are fully trained
on all QT Series generators and
can provide your customers with
hassle-free maintenance and
service agreements.
GEMINI®TWIN PACK
FOR HIGHEST POWER
DENSITY
When space is at a premium and
reliability is critical, no other
manufacturer comes close to
Generac’s Gemini Twin Pack.
Part of the MPS family, these units
feature two 500 kW generators inside
a single, weather resistant and sound
attenuated enclosure. The exclusive
PowerManager™ control system
allows for combining the output of
large, single engine gensets with a
significant improvement in reliability.
• Smallerfootprintthanmany
comparable single engine models
• Built-inredundancyforsuperior
system reliability
• Scalablesolution–uptoseven
Gemini gensets can be paralleled
without additional switchgear for
up to 7,000 kW in total output
• Fastproductionturnaround–
often within weeks
• Easilyservicedwithcommonparts

BI-FUEL™
Longest Run Times in the Industry
Generac Bi-Fuel generators start on diesel fuel and add natural gas as load is applied.
During an outage, they typically operate on a mixture of up to 70% natural gas and
30% diesel fuel (contact factory for product specifications). If the natural gas supply is
interrupted, the generator automatically switches to 100% diesel without any power drop
during the transition.
Benefits of Bi-Fuel
• Dramaticallyincreasedruntimes
• Minimalon-sitefuelstorage
• Reducedfuelmaintenance
• Reducedenvironmentalrisk
• LowerparticulateandNOxemissions

7
PORTABLE 1800 – 17500 WATTS
Better power. More choices.
From home use to camping, construction or outdoor events, Generac portable generators
provide dependable portable power. Power the fun stuff or cover an emergency. The wide
range of sizes gives you flexibility to choose as much power as you need.
gp series
GP SERIES: 1800 — 17500 WATTS
GP 1800 —8000 Watts
Easy to use in a variety of applications, our GP series of portable
generators offers affordable reliability. Features include:
•Hardened Steel Tube Cradle for durability
•Low-Oil Shutdown shuts engine down when oil runs low and prevents
serious damage
•Circuit Breaker Protected Outlets for circuit protection
•Hour Meter with maintenance resets (excludes GP1800 and GP3250)
GP 15000E — 17500E Watts
Two of the most powerful portable generators on the
market offer exceptional value:
•16-Gallon Fuel Tank provides extended run time
•Idle Control increases fuel efficiency
wheel kit and lifting eye
xp series
XP SERIES: 4000 — 10000 WATTS
The professional grade XP Series of portable generators has been engineered for high
performance. Durable construction with oversized full wrap frame tubing and impact
resistant corners minimizes damage from rough handling. These rugged units also include:
•True Power™ Technology for utility quality
electrical output for sensitive electronics
•Low-Oil Pressure Protection to protect
engine from damage
•Covered Outlets for more protection from the
environment
•Start/Stop Fuel Shut-off and Choke Controls
conveniently located on outlet panel
•External Battery Charge Jack on
electric start models
•Circuit Breaker Outlet Protection
including dual breakers on
120/240V outlets
•Cord Set included 25’/30 Amp
•Maintenance Kit included
•GeneracOHVI®Engine*: Generac’s
original and proven Overhead Valve
Industrial engines provide the longest
running time in the industry.
•ElectricStart*: Includes starting battery.
•Never-FlatWheels:Provide all-terrain
portability.
•HourMeter*: Tracks usage and includes
maintenance resets.
•SteelFuelTank: Includes incorporated
fuel gauge.
•Low-ToneMuffler: Provides quiet
operation.
•Fold-DownHandles: Provide easy
portability.
* See specs for available models.
XP SERIES
GP SERIES

8
AUTOMATIC TRANSFER SWITCHES
POWERMASTER™
LOAD SHEDDING
DEVICE
Create priority loads to ensure
home comfort during a power
loss! The PowerMaster is a load
shedding device that allows
a home owner to operate two
large electrical loads instead
of only one large appliance.
Examples of this include a
central air conditioner or an
electrical hot water heater. When
the priority load is running,
the PowerMaster will lock out
the other piece of equipment,
keeping it from turning on until
the demand is satisfied for the
priority load. After the demand is
satisfied, the PowerMaster allows
the secondary load to come
online and operate.
transfer switches
AUTOMATIC TRANSFER SWITCHES
As a part of the generator system, the transfer switch transfers the electrical load onto the
generator when power fails. When utility voltage returns, the transfer switch safely returns
circuit coverage back to the utility.
DistributedLoadCenter
Generac offers three models of automatic transfer switches for homeowners who
choose to back up selected circuits rather than the entire house. Pre-wired load
center models are available with a choice of 8, 10, 12, 14 or 16-circuits.
Generac makes installation easy and inexpensive.
All distributed load center models include:
• 30ft.pre-wiredconduitforconnectingthetransfer
switch to the external connection box
• 2ft.pre-wiredconduitformovingcircuitsfrom
the main panel to the transfer switch
• Pre-wiredexternalconnectionboxwithaweather-proof
conduit for generator connections
PowerManager™LoadSheddingTransferSwitch
The PowerManager LTS is designed to allow the most efficient use of the generator by
monitoring and managing the backed up selected and non-selected circuits.
If the generator approaches overload condition, the non-selected circuits are
cycled off, allowing the selected circuits to remain powered. This switch is
designed to operate with the digital controls that are used on single-phase
air-cooled and liquid-cooled generators from 17 kW through 48 kW.
• HousedinanaluminumNEMA3R,outdoorratedenclosure
• Serviceentranceratedat200Ampswithbuilt-in16circuit
priority load center
• Maincontactorprotectstheselectedprioritycircuitswhilethe
secondary contactor protects the remaining, non-selected
circuits located in the existing electrical panel
•Coverissidehingedforeasyaccess
RTSTransferSwitches
RTS transfer switches are designed for a wide variety of applications that
require up to 400 Amps. The RTS is integrated with the R-Series digital
controller and operates only with standby generators thru 60 kW.
NEMA 3R (outdoor rated) enclosures are standard.
RTS-N (Single and Three-Phase)
Use RTS-N models for custom installations or with
applications that require a sub-panel.
• 100,200,or400Amp
RTS-EwithServiceDisconnect (Single-Phase)
Use RTS-E models with service disconnect for quick and
easy installations.
• 100,200,or400Amp
• Service-entranceratedandULListed(U.S.only)
(shown without cover)
For use with units
up to 60 kW

9
HTS TRANSFER SWITCHES
(Single-Phase and Three-Phase)
HTS transfer switches, designed for simple monitoring,
operation and maintenance, are constructed to ensure superior
performance. The HTS is part of an integrated system and
operates only with Generac commercial-series generators
(70-150 kW) with the H-100 controller. All switch components are
front adjustable and removable for programming and servicing.
AUTOMATIC TRANSFER SWITCHES
THE GENREADY™ LOAD CENTER –
The future in generator installation
The GenReady Load Center simplifies the generator system
and installation and maximizes customer savings. In addition,
advanced engineering creates the easiest and most cost-effective
installation of any home standby generator on the market. New home
construction, or renovations requiring electrical upgrades, are the
opportune time to install a GenReady Load Center and a Generac
automatic home standby generator.
With a traditional generator installation, three boxes are required:
the main circuit panel, the automatic transfer switch, and the
emergency circuit panel.
The GenReady Load Center replaces the main circuit panel and
incorporates an automatic transfer switch so all power switching is
handled within one unit. It becomes a hybrid panel capable of separating out only the
electrical circuits the homeowner chooses to back up during a power outage.
Features include:
• 40circuitcapacitywiththeuseoftandembreakers
• Dimensionssameasastandard42-circuitmainloadcenter
• UtilizesstandardSiemensLoadcomponents
• Compatiblewithgeneratorsratedupto125Amps/30kW
•Single-Phaseapplicationsonly
™
The innovative GenReady load center combines
three boxes into one, saving space and money on
generator installations!
200 Amp
Main Load
Center
42-Space
Emergency
Load
Center
Automatic
Tr ansfer
Switch
Traditional Installation GenReady™ Installation
GenReady Installation Levels
Basic Advanced Complete
RECOMMENDED
MODEL SWITCH
QT022 ........................RTS 100
QT025 ........................RTS 100
QT027 ................ RTS 100-200
QT030 ................ RTS 100-200
QT035 ................ RTS 100-200
QT045 ................ RTS 100-200
transfer switches
EZ TRANSFER
OPERATOR™
The EZ Transfer Operator was
developed by Generac to
install into the GenReady Load
Center. When installed with
a generator, it automatically
transfers the protected circuits
from utility to generator power
during a power outage. When
utility is restored, the EZ
Transfer Operator returns the
circuits back to utility power.
BUILDERS –
Join the Generac Builder
Alliance and get cash back
for generator purchases
Offer your new home customers
the safety and comfort of
automatic standby power and
increase your profits at the same
time. Starting from the first unit
you buy, Generac will give you
cash back for your generator
purchases. In addition to the profit
earned from each sale, you will
receive cash rebates for product
purchased through your indicated
Builder Alliance Partner(s).
Program Benefits:
As a builder, when you join the
program you will receive:
• 200NewHomeOwner
brochures
• Marketingsupportcd
• Factorycontactinformation
and sales tools
• Informationoninstallation
training for your electrical
contractor
Visit builder.generac.com to join.
l l i a nce
A
BUILDER
TM
program
RECOMMENDED
MODEL SWITCH
QT060 ................ RTS 100-400
QT070 ................ HTS 100-400
QT080 ................ HTS 150-400
QT100 ............... HTS 200-600
QT130 ................ HTS 200-600
QT150 ................ HTS 300-800

ACCESSORIES
ACCESSORIES
Air-Cooled Cold Weather Kit
Model Description Contents
5634
For air-cooled units mfg prior to 4/08 Battery wrap with internal thermostat
5635 For air-cooled units mfg after 4/08 Battery wrap with internal thermostat
Liquid-Cooled Cold Weather Kit
Model Description Contents
5629 For 1.6L engines 28” Battery warmer w/oil filter
5630 For 2.4L engines 28" Battery warmer, zip ties, thermostat
5631 For 4.2L engines 44" Battery warmer, zip ties, thermostat
5632
For 3.0, 4.6, 6.8 direct drive units 44" Battery warmer, zip ties, thermostat
5633 For 6.8L gear drive units 44" Battery warmer, zip ties, thermostat & gear oil
Liquid-Cooled Extreme Cold Weather Kit
Model Description Contents Use with cold
weather kit #
5615 18 kW (3600 rpm), 20,
25, 30 kW (1.6L)
Block heater & mounting hardware 5629
5616 25 kW (1800 rpm), 45 kW (2.4L)
Block heater & mounting hardware 5630
5618 35 & 45 kW - both 1800 RPM (4.2L) Block heater & mounting hardware 5631
5617 60 kW (3.0L) Block heater & mounting hardware 5632
5619 80 kW (4.6L) Block heater & mounting hardware 5633
5620 70, 100, 130 kW (6.8L) Block heater & mounting hardware 5634
5667 150 kW (6.8L) Block heater & mounting hardware 5635
Load Management Options
Model Description Contents Use with
5239 PowerMaster load shedding device
PowerMaster 60 kW & below
5621 Auxiliary transfer switch contact kit Contact, screws & washers R-style switch
Miscellaneous
Model Description
5651 Base plug for all liquid-cooled models
5652 Base plug for all air-cooled models mfg prior to 4/08
5654 Grey paint kit – Units mfg prior to 4/08
5653 Tan paint kit – Units mfg prior 4/08
5703 Bisque paint kit – Units mfg after 4/08
5704 Medium grey paint kit – Units mfg after 4/08
5685 Air-cooled generator transport cart
5666 Fascia for air-cooled units mfg after 4/08
Air-Cooled Remote Monitoring Options*
Model Description
5636 Remote wireless monitor
Liquid-Cooled Remote Monitoring Options
70 kW and above
Model Description
5464 Remote annunciator panel with 8 relays
5465 Remote annunciator panel without LEDs
and keypad (relays only)
5466 Remote annunciator panel without relays
Air-Cooled Scheduled Maintenance Kit
Model Description
5661 7 kW, 410 cc kit
5662 8 kW, 410 cc kit
5663 10 kW, 530 cc kit
5664 12,13, 14,15, 16 kW, 17 & 18 kW,
760/990 cc kit
5665 20 kW, 999 cc kit
Liquid-Cooled Scheduled Maintenance Kit
Model Description
5655 18 kW low speed aluminum, 20, 25 &
30 kW steel, 3600 RPM units, 1.6L units
5656 25 kW low speed aluminum & 45 kW
steel, 3600 RPM units, 2.4L units
5657 60 kW unit, 3.0L units
5658 35 & 45 kW low speed, aluminum,
4.2L units
5659 80 kW, 4.6L kit units
5660 70, 100, 130, 150 kW, 6.8L units
Remote Wireless Monitor for
Air-Cooled Generators
Add efficiency by allowing for remote
viewing of generator status and
parameters from inside the home.
Scheduled
Maintenance Kits
A scheduled maintenance
program will ensure that your
system is always in top operating
condition and that your warranty
requirements are met. Generac
offers a comprehensive line of
scheduled maintenance kits to ensure long life and top
performance of your generator system.
Cold Weather Kit
The cold weather kits are
recommended for areas where the
temperature drops below 30° F.
Fascia for Air-Cooled Units
Complement the contoured enclosure with a fascia base wrap
that snaps together around the bottom of the generator. Fits
air-cooled generators manufactured after April 2008 that have
the contoured body wrap style. Fascia continues the sleek,
contoured appearance as well as offering
protection from rodents and insects by
covering the lifting holes located
in the base. Available in grey
only. Standard on
20 kW air-cooled model.
Air-Cooled Generator Transport Cart
Moving a 400 lb generator can be
hard work. The Generator Transport
Cart will assist with moving the
generator from the truck to the
planned installation site. Allows for
a single person to easily maneuver
any air-cooled product to the desired
installation location.
10
* For use with 10-20 kW air-cooled generators manufactured after April 2008.