General Pump D30001 User manual

General Pump
1174 Northland Drive • Mendota Heights, MN 55120
Phone: [phone] • Fax: [phone]
www.generalpump.com • email: [email protected]
Ref 300638 Rev. F
08-11
WARNING!
Exposure of skin directly to
pressurized air or fluids could
result in severe bodily injury!
1. Make sure incoming pressure does not exceed
the rated pressure.
2. Use proper eye protection when assembling and
using the hose reel.
3. Assemble the hose reel on a clean workbench
free of debris and moisture.
4. Use soap and water when checking for air leaks.
5. Keep children away from work area.
AFETY PRECAUTION
8
General Pump
is a member of
The Interpump Group
• D30001 (as shown)
• D30002 (as shown)
• D30004 (w/pigtail)
• D30006 (w/pigtail)
• D30007 (w/pigtail)
• D30008 (w/pigtail)
• direct hand-crank rewind
with locking mechanism
• solid steel construction
• durable powdercoat finish
• full flow swi el brass joint
Hose
Reels
From General Pump
operator’s manual

33
11
22
44
55
PART LI T
MAXIMUM TEMPERATURE RATING: 1850F
A EMBLY AND OPERATING IN TRUCTION
1. Connect the handle to the flange. Nuts go on handle side of flange.
2. Use (4) 3/8” or 10 mm bolts when securing the hose reel to ceiling or
wall.
3. Use the provided nuts, bolts and mounting bracket when securing
hose reel to a cart.
4. Use thread sealant (not provided) on inlet threads and on outlet hose
(not provided).
5. The hose reel is ready for operation.
Item
1 2 3 4 5
D30001
100055
100887 N/A
D10116
N/A
D30002
D30004
100053 D30003 D10065
D30006
D30007
D30008
100888 Repair kit for 100887 and 100053
PECIFICATION
Model 3/8” Capacity Pressure Inlet Outlet
D30001 50’
3500 P I
3/8 NPT-F
3/8 NPT-F
D30002 100’
D30004 150’
3/8 NPT-M
D30006 200’
D30007 200’
D30008 250’
Dimensions (in/mm)
A B C D E F
D30001 10.5/267 7.7/195 7.6/192 11.0/281 14.4/365 12.8/326
D30002 10.5/267 12.0/308 7.6/192 15.2/386 18.5/471 12.8/326
D30004 13.4/340 9.8/250 9.7/249 10.8/274 18.0/458 16.5/419
D30006 13.4/340 12.2/310.6 9.8/248 16.2/410.6 19.4/493.5 16.5/418
D30007 16.6/422 9.8/250 11.5/291 14.5/367 13.2/335 19.8/502
D30008 13.4/340 14.8/375.6 9.9/251 18.6/472.1 21.9/555.7 16.6/421
A
C
B
D
E
F
D30004, D30006, D30007, D30008 MOUNTING
ALL DIMEN ION IN/MM