General iq314s User manual

Ver.3
General Company Limited
Instruction for White Ink Cartridge
Please read the instruction before use.
1. The white ink cartridge must be stored in “Nozzle Up” to keep the nozzles
healthy.
2. To maintain optimum printing conditions, before installing it in a printer,
shake it up and down for 30 seconds as shown in the picture.
NOTE : Please do not shake the cartridge strongly, it might cause the
ink cartridge damage.
3. After shaking the cartridge, please remove the clip and wipe excess ink
with a lint-free dry cloth from the print head facing down.
NOTE 1: DO NOT USE a cloth with WATER.
NOTE 2: When the cartridge is dirty with the ink, clean the print head with a
lint- free cloth moistened with isopropyl alcohol.
1
3
2

Ver.3
General Company Limited
4. Please test the cartridge performance before running it.
5. After every use, to prevent nozzles drying out, wipe excess ink again with a
lint-free dry cloth and attach the original clip to the cartridge. Make sure the
cartridge is stored in “Nozzle Up”.
<General caution>
1. The whiteness may vary during printing due to the nature of the ink.
2. White ink cartridge may show nozzle missing on daily use. Please
shake and wipe the cartridge by following this instruction when it
happens.
The instruction ends here.
4
5

Ver.3
General Company Limited
NOTE: What if happen print missing?
1. If print missing like photo 6 is happened during the print job, please take
out the cartridge and place a clip on it.
2. Then, turn the nozzles upwards like photo 7 and shake it for 30
seconds. After that, take out the clip and wipe excess ink with a lint-free
dry cloth from the print head facing down.
3. Please attach the ink cartridge on the printer and check the recovery of
print result before use.
7
6
8