GeneralAire GF-200 Series User manual

HEPA AirCleaners Installation Manual
GF-200 / GF-400 Series HEPA Air Cleaners
GF-200D & GF-400D
GF-200R & GF-400R
400 Midwest Rd.
Toronto, ON M1P 3A9
[phone]
www.GeneralaireIAQ.ca
17” W
24” H
24” H
12.75” D
12.75” D
Please Read And Save These Instructions
GENERALAIRE® HEPA AIR CLEANERS
Model GF-200D
(Duct Mount)
GF-400D
(Duct Mount)
GF-200R
(Room/Portable)
GF-400R
(Room/Portable)
Weight (Pounds) 30.5 35 30.5 35
Dimensions (Inches) 24 H x 12.75 D x 17 W
Rated Air Flow (CFM) 200 400 200 400
Min. Avg% Eff. 1.0-3.0 Microns HEPA 99.97%
Operation Air Flow From Furnace Through Air Cleaner Room / Portable
Replacement Filters 1. HEPA - Replace Every 2 Years (GF-4645) / 2. Pre-Filter With Carbon (GF-4646) - Replace Every 3- 6 Months
Power Consumption (Watts) 120 300 120 300
Amperage 115V / 1 / 60Hz; 1.30 Amp 115V / 1 / 60Hz; 2.75 Amp 115V / 1 / 60Hz; 1.30 Amp 115V / 1 / 60Hz; 2.75 Amp
Certication CCSAUS
Collar / Intake / Exhaust
Openings (Inches)
Collar: 8 (203 mm)
Intake: 3.75 (95 mm) x 14.375 (365mm)
Exhaust: 3.75 (95 mm) x 14.375 (365mm)
Pallet Quantity 18
Mounting Return Air Duct Room / Portable
Warranty (Years) 5
In the Box
HEPA Air Cleaner, 9’ Power Cord, Installation Manual,
Duct Collars, Pre-Filter, HEPA Filter, 3 Mounting
Brackets, Screws, Mounting Template
HEPA Air Cleaner, 9’ Power Cord, Installation Manual,
Pre-Filter, HEPA Filter, Screws, Caster Wheels
70081850
™
System Capacity ** up to 2200 Sq. Ft. up to 4200 Sq. Ft. up to 2200 Sq. Ft. up to 4200 Sq. Ft.
Our Brands
Last Updated: 02-2021
®
** CFM calculation: ACH X Volume ( Cubic Feet L x W x H) /60=CFM
Square Footage calculations based on average of 0.70ACH

INSTALLATION
1. Before Installing Your New Surface or Duct Mount HEPA Air Cleaner, Determine:
• Location on the return side of the duct for installation of your HEPA 200D or 400D.
• Determine if you will be installing via surface mount or duct mount.
Surface Mount HEPA (Models GF-200D / GF-400D)
Surface Mount
Duct Mount Collars Are Included!
Intake
Exhaust
Bottom
Support
Bracket Side
Mounting
Bracket
*Side Mounting Brackets Add 1” on Either
Side of HEPA Unit; Requiring a Minimum
Duct Width of 20” for Installation
• WARNING: Disconnect electrical power before beginning installation.

!
Duct Mount
1. Install mounting support bracket on return air duct for
bottom support using the provided #8 x 1/2” screws.
2. Install the side mounting brackets on both sides of the unit
by removing and remounting the screws located on the
unit*
3. Using the provided template, cut rectangular intake and
exhaust holes in the duct work. Each will measure 3.75”
high by 14.375” wide.
4. Cut out the intake and exhaust holes from the back of the
HEPA unit.
5. Hang the HEPA Air Cleaner onto the duct, rst resting on
the bottom support bracket. Screw side brackets into the
duct using the provided #8 x 1/2” screws.*
6. Remove lters from plastic bags. Insert the pre-lter with
carbon in the top slot; the HEPA lter in the bottom slot.
7. Plug unit into a 120V outlet. Turn fan on using the dial
control to the preferred speed.
See maintenance on the back page.

INSTALLATION CONT.
1. Install mounting support bracket on return air duct for
bottom support using the provided #8 x 1/2” screws.
2. Install the side mounting brackets on both sides of the unit
by removing and remounting the screws located on the
unit.*
3. Cut round intake and exhaust holes in the duct work; each
8” in diameter.
4. Cut out the round intake and exhaust holes on the top and
bottom of the HEPA unit.
5. Hang the HEPA Air Cleaner onto the duct using the
provided #8 x 1/2” screws. Attach duct to intake and
exhaust holes. Screw side brackets into the duct using the
provided #8 x 1/2” screws.*
6. Install 8” collars using the provided #8 x 1/2” screws (12
included).
7. Remove lters from plastic bags. Insert the pre-lter with
carbon in the top slot; the HEPA lter in the bottom slot.
8. Plug unit into a 120V outlet. Turn fan on using the dial
control to the preferred speed.
See maintenance on the back page.
Duct Mount HEPA (Models GF-200D / GF-400D)
Duct Mount Collars Are Included!
Intake
Exhaust
Bottom
Support
Bracket Side
Mounting
Bracket
1. Remove filters from plastic bags. Insert the pre-filter with carbon in the
top slot and the HEPA filter in the bottom slot.
2. Install caster wheels.
3. Place in room of choice and plug the unit into a 120V outlet.
4. Turn variable speed dial control to increase airflow (CFM).
See maintenance on the back page.
*Side Mounting Brackets Add 1” on Either
Side of HEPA Unit; Requiring a Minimum
Duct Width of 20” for Installation
Room / Portable Units (Models GF-200R / GF-400R)

WARRANTY
Your new HEPA Air Cleaner carries a 5-year limited warranty. For our complete warranty policy visit
www.GeneralaireIAQ.ca
MAINTENANCE
1. Replace your pre-filter with carbon (GF-4646) every 3 to 6 months.
2. Replace your HEPA filter (GF-4645) every 2 years.
IMPORTANT: To ensure your safety and the longevity of your unit, we recommend:
• Contacting a licensed contractor to perform maintenance or repairs.

!
1.
2.
3.
4.
6.
6.
1. Pleated Pre-Filter With Carbon (GF-4646)
2. HEPA Filter (GF-4645)
3. Child Safety Switch
4. PSC Motor
5. Variable Motor Control (Not Shown)
6. Door Latch
• WARNING: Disconnect electrical power before beginning maintenance.

!
Last Updated: 02-2021
400 Midwest Rd.
Toronto, ON M1P 3A9
[phone]
www.GeneralaireIAQ.ca
®
Our Brands