Genie GAHDCMIR User manual

Quick Start Guide
Please read these instructions carefully before operating the unit
and keep for further reference. All the examples and pictures used
here are for reference only. The contents of this manual are subject
to change without notice.
2MP AHD Corner Mount
Camera with 2.8mm Lens
GAHDCMIR

Quick Start Guide 2MP AHD Corner Mount Camera with 2.8mm Lens
2
Features
• 1/2.8” Sony Starvis CMOS sensor
• Full HD Mega Pixel (1080p)
• 4-in-1 (AHD, TVI, CVI, CVBS)
• 30 covert 940nm invisible IR LED’s for discreet monitoring in the dark
• 2.8mm MP lens
• Vandal resistant metal front panel
• Auto compensation and Long range transmission
• 3D DNR (Digital Noise Reduction)
• UTC (OSD via coaxial cable)
• Sens-Up
• True Day & Night function with ICR mechanism
• D-WDR (Digital Wide Dynamic Range)
• Live defect detection and correction
• Built-in OSD and one-way audio
• DC12V
• NDAA compliant
Specifications
Camera
Image Sensor 1/2.8” Sony Starvis CMOS image sensor
Active Pixel 1920 (H) x 1080 (V)
Resolution 1080p @ 30fps / 1080p @ 25fps
Minimum Illumination Colour : 0.001 Lux (F=1.2), B&W : 0.000 Lux (IR on)
Lens 2.8mm MP lens
Shutter Speed Auto / Manual (1/50(60) ~ 1/50,000 sec)
S / N Ratio More than 50dB (AGC off)
Scanning System Progressive
Video Output Universal AHD, CVI, TVI : 1080p,
Analogue: NTSC / PAL CVBS
Functions
AGC Off / 0–15
D-WDR Off / 0~8
Sens-Up Off x2 – x30
Backlight Off / BLC / HSBLC
DNR Off / Low / Middle / High
Privacy Mask 4 Masks
Motion Detection Off / On
Day & Night Auto / Colour / B&W / Extern
Defog Off/Auto
Brightness 0 – 100
Sharpness 0 -10 steps
Mirror Off / Mirror / V-Flip / Rotate
White Balance ATW, AWC, Indoor, Outdoor, Manual, AWB
Audio One-way built-in
IR 940nm invisible IR
Languages 13 languages
Others
Power Supply DC12V ±10%
Power Consumption Max. 3.5 Watt at IR on
Operating Conditions Temperature: – 10°C ~ 50°C, Humidity: 10% ~ 85%
Dimensions 190 × 140 × 42.3 mm
Weight 390g

Quick Start Guide 2MP AHD Corner Mount Camera with 2.8mm Lens
3
Dimensions
Cable
CAUTION! Please use regulated power supply DC12V 500mA
Reverse Polarity Protection
Mode Change
CVBS Mode: Push the Left OSD Key for 5 Seconds
AHD Mode: Push the Right OSD Key for 5 Seconds
CVI Mode: Push the Up OSD Key for 5 Seconds
TVI Mode: Push the Down OSD Key for 5 Seconds
Accessories
Mounting Screws L-Wrench Sticker (Puddle up Screw Holes)
Power Input (DC12V)
Video Output
Audio
190mm
42.3mm
140mm

Quick Start Guide 2MP AHD Corner Mount Camera with 2.8mm Lens
4
Installation
Step 1
Fix the product on the corner by screws.
Step 2
Put on the cover of the base and adjust direction and fix the
cover on the base by L-Wrench.

Sales [phone]
Enquiries [email protected]o.uk
Website www.genieproducts.co.uk