Genie SSAHD2B User manual

Quick Start Guide
Please read these instructions carefully before operating the unit
and keep for further reference. All the examples and pictures used
here are for reference only. The contents of this manual are subject
to change without notice.
2MP Stainless Steel AHD IR
Bullet Camera with 3.6mm
Fixed Lens
SSAHD2B

Quick Start Guide 2MP Stainless Steel AHD IR Bullet Camera with 3.6mm Fixed Lens
2
Features
• 1/2.8” Sony Starvis CMOS image sensor
• Full HD Mega Pixel (1080p)
• Auto compensation and long range transmission
• Stainless steel body (AISI 316L grade)
• 3.6mm megapixel lens
• 24 pcs pearl LED’s
• True day & night with ICR mechanism
• 3D DNR (Digital Noise Reduction)
• D-WDR (Digital Wide Dynamic Range)
• IP67 ingress protection
• DC12V
• Wall mount bracket option
• NDAA compliant
Specifications
Camera
Image Sensor 1/2.8” Sony Starvis CMOS sensor
Scanning System Progressive
Resolution 1080p
Minimum Illumination 0.01 Lux at IR off (F1.0), 0.00 Lux at IR on
Lens 3.6mm megapixel fixed lens (ICR)
S / N Ratio More than 50dB (AGC Off)
Video Output Universal AHD, CVI, TVI: 1080p, 720p
Analogue: NTSC/ PAL CVBS
Functions
Sens-Up Off / x2 – x30
DNR Off / Low / Middle / High
Backlight Off / BLC / HSBLC
D-WDR Off / 0–8
Motion Detection Off / On
Privacy Mask 4 Masks
Others
Ingress Protection IP67
Power Supply DC12V (± 10%)
Power Consumption Max 4.0W
Working Environment Temperature: – 10°C ~ 50°C,
Humidity: 10 % ~ 85 %
Dimensions 58 × 126 × 104 mm
Weight 1200g

Quick Start Guide 2MP Stainless Steel AHD IR Bullet Camera with 3.6mm Fixed Lens
3
126mm
92mm
104mm
58mm
Accessories
DC12V
VIDEO
OSD
Fix bracket in desired place. Adjust the angle of view
with the 3-axis bracket.
Step 2
Wall Mount Bracket
(Option)
Mounting Screws
Mounting screws
Wall mount bracket (option)Screws
Serve cable
Mounting screws
Wall mount bracket (option)Screws
Serve cable
Mounting screws
Wall mount bracket (option)
Screws
Serve cable
Screws
L-Wrench
Dimensions
Mode Change
CVBS Mode: Hold left on OSD key for 5 seconds
AHD Mode : Hold right on OSD key for 5 seconds
CVI Mode : Hold up on OSD key for 5 seconds
TVI Mode : Hold down on OSD key for 5 seconds
Cable
CAUTION! Please use regulated power supply DC12V 500mA
Reverse Polarity Protection
Installation
Step 1

Sales [phone]
Enquiries [email protected]o.uk
Website www.genieproducts.co.uk