Genie IO-16-8IP User manual

Please read these instructions carefully before operating the unit
and keep for further reference.
User Manual
16 Input and 8 Output TCP/IP
Module with 6A DC12V PSU
IO-16–8IP

-----------------------------------------------------------------------------------------------------------------------------------------------------
Page 2of 8
Index
Chapter 1 Overview.......................................................................................................................3
Chapter 2 Hardware.......................................................................................................................5
Chapter 3 Wiring............................................................................................................................6
Chapter4 Operation........................................................................................................................8

-----------------------------------------------------------------------------------------------------------------------------------------------------
Page 3of 8
Chapter 1 Overview
The IO-16-8IP is an advanced fully intelligent Ethernet enabled controller based on
a 32 bit microprocessor. It is compatible with Sphinx Series access controllers.
1.1. Features
1. 32 bit TI ARM® Cortex M3 processor with 4MBit data memory
2. Power Over Ethernet
3. On board 100MBit real TCP/IP
4. Event Flow Control
5. Includes UDP Protocol
6. CE, FCC, RoHS approval
1.2. Specifications
1. CPU: 32 Bit Processor
2. 8 Output Relays (NC/NO)
3. 16 Inputs (NO)
4. RS-232/RS-485/TCPIP interface
5. POE: 802.1af
6. TCP Communication speed: 100M
7. 15 Time Groups for each relay
8. Transaction Storage: 25,000 events
9. Operating Voltage: 12V DC (±10%)
10. 110/220AC (50/60HZ) switched mode 12V DC 6APower Supply c/w 13.8V DC battery

-----------------------------------------------------------------------------------------------------------------------------------------------------
Page 4of 8
charging circuit
11. Operating Current: ≤200mA
12. Standby Current:≤150mA
13. Working Temperature: -40C~70C
14. Data Memory: 4M bit (protected)
15. 1 Lithium battery backup (up to 10 years data retention)
16. Metal case dimensions：403mm x 384mm x 72mm
17. Weight：0.2Kg (without metal case)
18. 4.7Kg (with metal case & PSU

-----------------------------------------------------------------------------------------------------------------------------------------------------
Page 5of 8
Chapter 2 Hardware
2.1. Panel description
2.2. DIP switch
S2：
Status
DIP
ON OFF
DIP 1 Configurable Protect
DIP 2 ForcedIP：10.1.1.10 Normal
DIP 3 Reserved Reserved
DIP 4 Online,TCP Standalone ,RS485

-----------------------------------------------------------------------------------------------------------------------------------------------------
Page 6of 8
Chapter 3 Wiring
3.1. Power supply
Power:
No. Controller socket Identification Color Remark
1
Power In
PE
Protection
Yellow
2 GND Ground Black
3 DC 12V 12VDC Red
3.2. POE Power Supply
The POE provides power and data from a single point, using Power over Ethernet over a single
Cat-5 cable. The nine fast Ethernet ports can be used for any 10\100 Mbps link and four of these
ports can supply industy-standard IEEE802.3af power. Advances auto-sensing algorithm gives
power only to IEEE802.3af end devices, so no need to worry about damaging proprietary POE or
non-POE equipment.
220VAC power and POE power supply, two choose one, do not use at the same time.
When using POE power supply, total current≤1000mA, output current≤600Ma
please check the working current carefully to avoid the shortage of power supply when
connecting the reader.
When using a magnetic lock, please do not take electricity from the controller in case the
power supply is insufficient.
When using POE power supply, you can connect the battery to the controller.
3.3. SMPS1260 Power Supply
Notes
：

-----------------------------------------------------------------------------------------------------------------------------------------------------
Page 7of 8
The SMPS1260 is a heavy duty Switch Mode Power Supply with a 110-123V input. It has 2
outputs, a 12V DC 6Amp primary output and a secondary 12V DC battery charging output.
SMPS1260

-----------------------------------------------------------------------------------------------------------------------------------------------------
Page 8of 8
Chapter4 Operation
In 【door configuration】door configuration ,we can set rules 【by inputs】
In 【output action】， there are two action mode.
Keep opened/closed: keep opened/closed until next link condtion ,it can set keeping
times
Back to normal:following the condtion .when input is over ,the output is down.

Sales [phone]
Enquiries [email protected]o.uk
Website www.genieproducts.co.uk