Genius TREK 310 User manual

English
-1-
Trek 310 Features
1 SnapShot Button
2 LED Indicator
3 Red-Infrared light
4 Microphone
5 Swivel and Clip Base
NOTE
Please note that the red-infrared function will be triggered automatically
when the light is insufficient.
Due to the feature of the red-infrared light, the image will become black and
white when the environment is dark.
There are two sets of sticker, you can paste it anywhere you want on the Trek
310.
Installing the Trek 310
1. Please install the driver first and then connect Trek 310 to
the USB port.
2. Installing the Trek 310 driver
a. Insert the Trek 310 Installation CD into the CD-ROM drive.
b. The Autorun screen will bring up the installation screen. Click on
“Driver” then simply follow the on-screen instructions.
c. Install “DirectX”from the CD.

English
-2-
Notice: If theAutorun screen doesn’t start, please follow these steps:
zClick on “Start Menu”.
zType D：\SETUP.EXE, then click “Enter” key.
(Assume your CD-ROM is in Drive D)
3. Insert the Trek 310’s USB cable to your desktop’s or
laptop’s USB port.
4. Complete software and hardware installation. You can
install the software you would like for video
conferencing or chat with your friends.
NOTE
To remove the driver installation:
Please go to the taskbar and follow “Start” Æ“Program” Æ“Trek 310”Æ
Click “Uninstall”, then follow the on-screen instructions to remove the
driver.
Genius Application (Windows Only)
You can use our software to capture the real-time image, record or
execute the simply security function.
To run the software, please go to the task bar and follow “Start”Æ
Click “Program”ÆChoose “Trek 310”ÆClick “Trek 310”. Or you

English
-3-
may execute the software by simply clicking the shortcut of “Trek 310”.
NOTE
After installing the driver of Trek 310, the system will automatically create a
file (C:\WINDOWS\Album or C:\WINNT\Album) to save the images you take
using the Genius Application.
1. Description for the major icon
Preview mode
Snapshot mode
Video Clip Mode
Security monitoring system
Exit
Camera Control
NOTE
In the “camera control section”, you can personalize your camera
settings for different circumstances.

English
-4-
1.You can adjust different
values for different
circumstances and
environment
2. For high quality image,
please click the monitor type
you are using with the web
camera
3. You may adjust the values
for different lighting.
4. Select the correct
frequency according to the
country where you are using
the web camera.
5.You can flip the image
horizontally or vertically
6. When you want a still
image capture, you can select
a resolution size you want.

English
-5-
2. Preview Mode
You can use the function buttons on the control panel to zoom in/out and
move upward/downward/left/right.
Zoom in the image
Zoom out the image
Move the image upward
Move the image downward
Move the image to the left

English
-6-
Move the image to the right
Resolution Selection
There are 2 categories of resolution: RGB24 and
I420. You can select 5 different image resolutions for
each of them. The file size of I420 will be smaller than
RGB24. So, I420 may be the better choice for
transmission.
3. SnapShot Mode
You can press the Snapshot button in the right of the circle to take a
picture right away and share with your friends.
Send photo by e-mail

English
-7-
Shoot continuously
Resolution selection
This section shows the resolution you selected in
the “Preview Mode”. If you want to change the
resolution, please click “ ”to go back to the
“Preview Mode” to make the changes.
4. Video Clip Mode
You can record real-time image in this section.
Send photo by e-mail

English
-8-
Convert AVI files into MEPG-1 format
Start recording
Stop recording
Exit the Video Clip Mode
To Create animation
Press to start; Press to stop
Press to return to the video recording mode
This function has to be under the resolution of RGB24 320 x
240 or I420 320 x 240. Please make sure the resolution is
correct before executing this function.
Resolution selection
This section shows the resolution you selected in the “Preview
Mode”. If you want to change the resolution, please click
“”to go back to the “Preview Mode” to make the changes.
5. Security Monitoring System
This function records any movements that appear in front of your monitor
automatically. It can also record anytime until the HD is full. If there’s no
movement, it will shut down automatically after four seconds otherwise it
will be active when detecting new movement. It’s a great security

English
-9-
monitoring system at times when you’re not around.
Start recording
Stop recording
Setup time of the security monitoring system
Set up the degree of the variance for every
second of recording image. When the differences
are over the setup degree, the system will alert
you.
Set up the different alerting sound effects

English
-10-
NOTE
In “Security Monitoring System” section, you can record in any size of
image resolution. If you want to change the resolution, please click
“”to go back to the “Preview Mode” and make the changes.
MSN Messenger, Yahoo Messenger, AOL
MSN Messenger
a. For live video function, you’ll need MSN Messenger version 6 or later. If
you don’t have it, please refer to the website:
http://www.msnmessenger-download.com to download.
b. Now, get to sign onto MSN Messenger service.
c. Choose a friend on the contact list and Click “OK” to confirm.
d. Double-click on your friends, who are available to chat. Click on the web
camera icon .
e. Your friend will then receive an invitation message. When your friend
confirms to talk, the video chat will start.
Yahoo Messenger
a. Download Yahoo Messenger at http://messenger.yahoo.com and finish the
registration, if you don’t have it.
b. Sign onto Yahoo Messenger.
c. From the main window, click Tools menu, then select “Start My Webcam”.
d. Right-click on a name in your Messenger List and choose “View
Webcam”.
e. Your friend will then receive an invitation message. When your friend
clicks YES, the video chat will start.