GeoMax ZeniusX Series User manual

GeoMax ZeniusX Series
Quick Guide
Version 1.0

Quick Guide 5
Quick Guide 23
Guía Rápida 41
Guide abrégé 59
Guida rapida 77
Guia Rápido 95
Краткое руководство 113
en
de
es
fr
it
pt-br
ru

GeoMax ZeniusX Series
Quick Guide
Version 1.0
English

1 Important Information about your
Instrument
Read and follow the User Manual before using the product or the accesso-
ries delivered with the product.
Keep for future reference!
•Remote control of GeoMax instruments.
•Data communication with external appliances.
The product must not be disposed with household waste.
☞
Intended use
Important Information about your Instrument 6
en

To ensure safety when using accompanying battery charger, also observe
the directions and instructions contained in the User Manual of the battery
charger.
For the AC/DC power supply and the battery charger:
WARNING
Electric shock due to use under wet and severe conditions
If unit becomes wet it may cause you to receive an electric shock.
Precautions:
▶If the product becomes humid, it must not be used!
▶Use the product only in dry environments, for example in buildings or
vehicles.
▶Protect the product against humidity.
☞
Important Information about your Instrument 7
en

For the AC/DC power supply and the battery charger:
WARNING
Unauthorised opening of the product
Either of the following actions may cause you to receive an electric shock:
•Touching live components
•Using the product after incorrect attempts were made to carry out
repairs.
Precautions:
▶Do not open the product!
▶Only GeoMax authorised service centres are entitled to repair these
products.
For products without radio transmitter or receiver:
•FCC Part 15 (applicable in US)
Conformity to
national
regulations
Important Information about your Instrument 8
en

•Hereby, GeoMax AG declares that the product/s is/are in
compliance with the essential requirements and other
relevant provisions of the applicable European Direc-
tives.
The full text of the EU declaration of conformity is avail-
able at the following Internet address:
http://www.geomax-positioning.com/Downloads.htm.
•FCC Part 15, 22 and 24 (applicable in US)
•Hereby, GeoMax AG, declares that the radio equipment type
ZeniusX is in compliance with the Directive 2014/53/EU and other
applicable European Directives. The full text of the EU declaration
of conformity may be consulted at
http://www.geomax-positioning.com/Downloads.htm.
Class 1 equipment according European Directive 2014/53/EU
(RED) can be placed on the market and be put into service with-
out restrictions in any EEA Member state.
Conformity to
national regula-
tions
Important Information about your Instrument 9
en

•The conformity for countries with other national regulations not
covered by the FCC part 15, 22 and 24 or European directive
2014/53/EU has to be approved prior to use and operation.
Important Information about your Instrument 10
en

2 Instrument Components
18642_001
d
c
b
a
a Screen
b Keypad
c Power key
d LED indicators
Front side of the
ZeniusX
Instrument Components 11
en

18643_001
c
d
a
b
e
f
g
a Camera flash
b Camera
c Holder for hand strap
d Speaker
e Release lever for battery compartment
f Compartment with slots for battery,
SIM card and SD card
g Hand strap fixation
Back side of the
ZeniusX
Instrument Components 12
en

a
c
b
18657_001
d
e
a Battery connectors
b SIM card slot
c SD card slot
d Holder for hand strap
e USB port and power supply
Battery compart-
ment and bottom
panel
Instrument Components 13
en

3 Technical Data
Temperature
Operating temperature: -30°C to +60°C
Storage temperature: -40°C to +80°C
Protection against water, dust and sand
IP67 (IEC60529)
Dust and waterproof
Humidity
Protection: 5 % to 95 % non-condensing
The effects of condensation are to be effectively coun-
teracted by periodically drying out the device.
Environmental
specifications
Technical Data 14
en

Vibration
Protection: Withstands strong vibration during operation, compli-
ance with MIL‑STD-810G, method 514.6E-I
ASAE EP455 Section 5.15.1 Random
Drops
Protection: Withstands 1.2 m drop
Technical Data 15
en

4 Care and Transport
•Protect the product against shock and vibration.
•Periodically carry out functional tests particularly after the product has
been dropped, stored for long periods or transported.
Care and trans-
port
Care and Transport 16
en

5 Operation
The battery must be charged before using it for the first time.
☞Only use the charger delivered with the ZeniusX.
1. Connect the AC power adapter to the ZeniusX and to an A/C
plug.
Alternative:
Connect the ZeniusX to a computer using the data transfer cable.
☞The data transfer cable has a lower charging capabil-
ity than the AC power adapter.
2. The battery starts charging. The Power LED flashes green to indi-
cate the charging.
☞
Charge battery
step-by-step
Operation 17
en

18661_001
12
☞Place the ZeniusX on a flat and stable surface or hold the device
in your hand.
Ensure that either the device is connected with the AC power
adapter or the batteries are charged up.
Turning on the
ZeniusX
step-by-step
Operation 18
en

1. Press and hold Power key until the ZeniusX vibrates once and the
GeoMax logo is shown.
2. When the Home screen is displayed, the ZeniusX is ready to use.
The operating system needs usually about 30-40 seconds for
booting up.
1. Press the Power key for at least 3 seconds to open the Power
Off menu.
Within the menu, the following options are available:
•Power off: The operating system shuts down and the
device is turned off.
•Reboot: The operating system shuts down and will restart
the system again.
•Airplane mode: Prevents the device from sending or
receiving calls and text messages. Airplane mode is also
known as offline mode, stand-alone mode and flight mode.
Turning off the
ZeniusX step-by-
step
Operation 19
en

2. To turn off the device, select the option Power
off.
☞After turning off the ZeniusX, wait for at least 5 seconds before
turning on the device again.
Operation 20
en