GeoMax Zenius5 Series User manual

GeoMax Zenius5 Series
Quick Guide
Version 1.1

Quick Guide 5
Quick Guide 35
Guía Rápida 65
Guide abrégé 97
Guida rapida 129
Guia Rápido 159
Краткое руководство 191
en
de
es
fr
it
pt-br
ru

GeoMax Zenius5 Series
Quick Guide
Version 1.1
English

Introduction
Congratulations on the purchase of the GeoMax Zenius5.
Read and follow the User Manual available on the GeoMax website before
using the product.
•This Quick Guide contains first use directions as well as initial, basic
instructions for setting up the product and operating it.
•Keep all documentation for future reference!
Name Description/Format
Zenius5
Quick Guide Provides an overview of the product. Intended as a quick reference guide.
ü ü
Purchase
Available docu-
mentation
6
en

Name Description/Format
Zenius5
User Manual All instructions required in order to oper- ate the product to a basic level are con-
tained in the User Manual. Provides an
overview of the product together with
technical data and safety directions.
-ü
Refer to the GeoMax website for all Zenius5 documentation/soft-
ware.
•Remote control of product.
•Data communication with external appliances.
Intended use
7
en

The symbols used in this manual have the following meanings:
Type Description
DANGER
Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARN-
ING
Indicates a potentially hazardous situation or an unin-
tended use which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a potentially hazardous situation or an unin-
tended use which, if not avoided, may result in minor
or moderate injury.
NOTICE Indicates a potentially hazardous situation or an unin-
tended use which, if not avoided, may result in appre-
ciable material, financial and environmental damage.
☞Important paragraphs which must be adhered to in
practice as they enable the product to be used in a
technically correct and efficient manner.
Symbols
8
en

CAUTION
Keeping the device too close to the human body during operation may pose
a health risk.
This device has been tested for typical operations near the human body, for
example handheld mode, with the device kept at 10 mm from the user’s
body.
Precautions:
▶Use the device at least 10 mm apart from the human body.
•Protect the product against shock and vibration.
•Periodically carry out functional tests particularly after the product has
been dropped, stored for long periods or transported.
The products of GeoMax are powered by Lithium batteries.
Care and trans-
port
Dangerous
Goods Regula-
tions
9
en

Lithium batteries can be dangerous under certain conditions and can pose a
safety hazard. In certain conditions, Lithium batteries can overheat and
ignite.
☞When carrying or shipping your GeoMax product with Lithium
batteries onboard a commercial aircraft, you must do so in
accordance with the IATA Dangerous Goods Regulations.
☞GeoMax has developed Guidelines on “How to carry GeoMax
products” and “How to ship GeoMax products” with Lithium bat-
teries. Before any transportation of a GeoMax product, we ask
you to consult these guidelines on our web page (http://
www.geomax-positioning.com/dgr) to ensure that you are in
accordance with the IATA Dangerous Goods Regulations and
that the GeoMax products can be transported correctly.
☞Damaged or defective batteries are prohibited from being car-
ried or transported onboard any aircraft. Therefore, ensure that
the condition of any battery is safe for transportation.
The product must not be disposed with household waste.
10
en

The battery must be charged before using it for the first time.
The following advice is only valid for batteries, power adapter or docking
station.
The instrument has a SD card slot fitted as standard. A SD card can be
inserted and removed. Refer to Insert and remove a SIM Card or a
SD Card step-by-step.
☞
☞
Memory device
11
en

1 Instrument Components
The Zenius5 package includes the following components:
0014001_001
a
b
c
d
f
g
e
h
i
j
e
a Zenius5
b ZBA700 rechargeable bat-
tery
c Capacitive stylus
d Hand strap
e Switching power supply
f Mini USB cable
g USB OTG cable
h ZCH700 battery charger
(optional)
i Quick guide
j Glass protection
Zenius5 package
Instrument Components 12
en

013752_001
g
f
e
d
c
b
a
a Communication LED
b GPS LED
c Power LED
d Screen
e Keypad
f Power key
g Microphone
Front side of the
Zenius5
Instrument Components 13
en

013762_001
c
d
a
b
e
f
a Camera
b Speaker
c Holder for hand strap
d Release lever for battery compartment
e Compartment with slots for battery,
SIM card and SD card
f Hand strap fixation
Back side of the
Zenius5
Instrument Components 14
en

ab dc
013764_001
a USB port
b Hand strap holder
c Serial connector
d Power connector
013776_001
abc
a Communication LED
b GPS LED
c Power LED
Bottom panel of
the Zenius5
LED indicators
Instrument Components 15
en

013753_001
a
b
c
d
h
i
j
e
f
g
k
l
a Left softkey
b Send key
c Function key
d Camera key
e Power key
f Numeric keys and alternative function
keys
g Right softkey
h End key
i Backspace key
j Start key
k Enter key
l Collect key
Keypad
Instrument Components 16
en

Key Function
Left softkey
Performs the command shown on the bottom left corner of the
screen.
Send key
Dials or answers a call.
Function key
Switches the alterative functions of the numeric keys on or off. If
the alternative functions are switched on, the icon Fn appears in
the navigation bar.
Camera key
Press to open camera app. If camera app is opened: Press to
take a picture.
Power key
Turns the Zenius5 on or off.
Functions of the
keys
Instrument Components 17
en

Key Function
Numeric keys
To enter numbers.
Right softkey
Performs the command shown on the bottom right corner of the
screen.
End key
Ends or rejects a call. Returns to the start screen.
Backspace key
Press to backspace over one character in a text editable field.
Windows key
Press to open the start menu.
Instrument Components 18
en

Key Function
Enter key
Press to confirm selections.
Collect key
Press to record data during measurements.
Depending on 3rd party software implementation.
Instrument Components 19
en

0013770_001
1. Place the Zenius5 on a flat and stable surface or hold the device
in your hand.
2. Ensure that either the device is connected with the AC power
adapter or the batteries are charged up.
Turning on the
Zenius5 step-by-
step
Instrument Components 20
en