George Home GSPM101T User manual

User Guide
220-240V~50/60Hz,
120-140W for motor，
800-1000W for heating
MAX---1200ml
MIN---800ml
GSPM101T Soup Maker

6

7
10.
11.
8
9
Care shall be
taken when handling the sharp cutting blades, emptying the
bowl and during cleaning.
Switch off the appliance and disconnect from supply before
changing accessories or approaching parts that move in use.
Regarding to the instructions for cleaning surfaces in contact
with food, please refer to chapter “How to clean your soup
maker”.

soup maker
such as
a gas or

MAX---1200ml
MIN---800ml
MAX---1200ml
MIN---800ml
,
Select- On/Off Button
Instruction Manual.
........
........
........
........
........
........
........
........
........
Manual

When assembling ensure the soup maker isn't plugged in. we
recommend you to wash the soup maker
soup maker' on page 11.
soup maker
Be
WARNING: Sharp blades

IMPORTANT: The level of all ingredients
(including liquid) must be between the MIN
800mL and MAX 1200mL marks. Never
under or overfill.
6. Press the Mode button (15) to select the
required program. The icon for each function
will illuminate in turn to show which one is
selected.
jug
lid
Smooth function
jug
indicator

soup maker
Select- On/off Button
soup maker
soup maker
If E3 is displayed on the screen, the level of
ingredients is too high in the jug. Lift off the
lid, and remove some of the liquid to bring the
level between min and max markers. Refit the
lid to start the programme again.
lid

soup maker
Do not use the blend setting for more than 3 cycles continuously.
The blend function will stop after 20 seconds continuous operation to
Please fill to bring the level between the minimum and maximum markers in the jug
(approximately 0.8-1.2L).
Juice
...use JUICE program
protect the motor from overheating. Press and hold the Select- On/off Button again if you
want to keep using the blend function.
Select- On/off
Button

Rotating mixer blade, risk of injury. Risk of scalding. (See the LED screen section).
Select-On/off Button
Select-On/off Button
Select-On/off
If you add any extra ingredients, make sure the total amount does not exceed the max
line. If the soup maker is too full, the LED display will show E3 error code. Unplug the
unit, and take out some ingredients to bring the level between the min and max line,
before restarting the cooking program.
Select-On/off