George Home Wooden pirate ship User manual

Step 1
Slot the back of
the ship (A) onto
the main body
(B) of the pirate
ship as shown.
Step 2
Slot the stud on
the bottom of
the ships wheel
(C) into the hole
in the upper
deck of the ship
as shown.
Step 3
Slot the
mounting
block (D) onto
the front of the
ship.
1.Unpack the
components
and check
against the list
below.
2.Place the
components on
a clean surface
to prevent them
from being
damaged.
3.After you have
assembled your
toy, dispose of
all packaging.
Getting started...
A x1
B x1
C x1
D x1
E x1
F x1
G x1
H x1
I x1
J x1
K x2
L x1
You will have...
A
C
D
B
Wooden pirate ship
Assembly Guide
IMPORTANT: RETAIN FOR FUTURE REFERENCE
WARNINGS:
• IMPORTANT SAFETY INSTRUCTIONS
• PLEASE READ ALL INSTRUCTIONS CAREFULLY
BEFORE USE AND RETAIN FOR FUTURE
REFERENCE.
• Adult assembly required.
• The hardware contains small screws with sharp points.
Keep unassembled parts out of the reach of small
children.
• WARNING! Not suitable for children under the age of 36
months. Components of this product may break off into
small parts presenting a choking hazard.
• Choking hazard: Unassembled parts may be a choking
hazard to children 3 years and younger.
• WARNING: Long cord, strangulation hazard. Keep long
cords away from babies and young children.

How to...
...care for and maintain your pirate ship
• Clean your pirate ship with a soft cloth.
• Never place your pirate ship in water.
• Regularly check that the product is not damaged. If the
product is damaged dispose of immediately
• Use the toy on a flat level surface only.
• Your pirate ship is not suitable for outdoor use. The
coatings will become scratched and product damage
may occur.
Step 4
Slot the studs on
the front rails (E)
into the holes on
the front of the
ship.
Step 5
Slot the main
mast (F) into the
large round hole
in the deck of the
ship.
Push the mast
down until the
stud on the
bottom is inserted
into the hole in
the bottom of the
ship.
Step 6
Slot the flag (G)
onto the crows
nest (H) as shown
in the diagram.
Slot the crows
nest onto the top
of the main mast.
Step 9
Slot the studs on the
bottom blocks of
the rope ladders (K)
into the holes on the
ships deck.
Slot the elastic into
the slots in the sides
of the crows nest.
Tie the cord on the
anchor (L) onto the
front rails
Your pirate ship is
now fully assembled.
Step 10
Now you have finished the assembly of the pirate ship. You
can now place all of the toys shown below on your pirate
ship.
Step 7
Slot the front
sail (I) onto the
mounting block
on the front of the
pirate ship.
Slot the cord on
the top of the sail
through the small
hole in the bottom
of the crows nest
and fasten with a
knot
Step 8
Slot the poles
on the rear sail
(J) into the holes
in the back of
the main mast.
E
I
F
G
J
K
L
H
Customer services
information
If you require further information,
spare parts or advice regarding
your product, or if you are
experiencing any problems, please
contact customer services at the
telephone number or address
shown opposite. N.B. When calling
or writing please quote the product
name.
Call
0800 952 0101
Write
Asda Stores Ltd.
Asda House, Southbank, Great Wilson
Street,
Leeds, LS11 5AD
Product name:
Wooden Pirate Ship
There are many more wooden role-
play toys to purchase and enjoy
x2
x1
x2