GeoVision GV-EBD4711 User manual

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual forfuture use. UBN-QG-A
Quick Start Guide
GV-IP Camera
GV-EBD4700 / 4711 IR Eyeball IP Dome
GV-ABL2701 / 4701 / 4712 IR Bullet IP Camera
GV-ADR2701 IR Mini Fixed Rugged IP Dome
GV-AVD4710 IR Vandal Proof IP Dome

© 2018 GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part,
without the written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is
accurate. GeoVision, Inc. makes no expressed or implied warranty of any kind
and assumes no responsibility for errors or omissions. No liability is assumed
for incidental or consequential damages arising from the use of the information
or products contained herein. Features and specifications are subject to
change without notice.
Note: No memory card slot or local storage function for Argentina.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: [phone]
Fax: [phone]
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV
series products are trademarks of GeoVision, Inc. Windows is the registered
trademark of Microsoft Corporation.
May, 2018

i
Contents
Note for Connecting to GV-VMS/ DVR / NVR......................................................... ii
Note for Installing Camera Outdoor...................................................................... iii
1. GV-EBD2702 / 4700 / 4711 ................................................................................ 1
1.1 Packing List................................................................................................... 2
1.2 Optional Accessories..................................................................................... 3
1.3 Overview....................................................................................................... 4
1.3.1 GV-EBD2702 / 4700 .............................................................................................. 4
1.3.2 GV-EBD4711.......................................................................................................... 5
1.4 Installation..................................................................................................... 6
2. GV-ABL2701 / GV-ABL4701............................................................................ 12
2.1 Packing List................................................................................................. 13
2.2 Optional Accessories................................................................................... 14
2.3 Overview..................................................................................................... 15
2.4 Installation................................................................................................... 17
3. GV-ADR2701 / 4701......................................................................................... 21
3.1 Packing List................................................................................................. 22
3.2 Optional Accessories................................................................................... 23
3.3 Overview..................................................................................................... 24
3.4 Installation................................................................................................... 25
4. GV-AVD4710.................................................................................................... 28
4.1 Packing List............................................................................................................. 29
4.2 Optional Accessories .............................................................................................. 30
4.3 Overview................................................................................................................. 31
4.4 Installation............................................................................................................... 32
5. Waterproofing the Cable ................................................................................ 34
6. Accessing the Camera ................................................................................... 36
6.1 System Requirements................................................................................. 36
6.2 Looking Up the Dynamic IP Address ........................................................... 37
6.3 Configuring the IPAddress.......................................................................... 39
7. The Web Interface........................................................................................... 40
8. Upgrading System Firmware ......................................................................... 42
9. Restoring to Factory Default.......................................................................... 43

ii
Note for Connecting to GV-VMS/ DVR / NVR
The GV-IPCAM in this Quick Start Guide is designed to work with GV-VMS / DVR /
NVR, a video management system. Once the camera is connected to the GV-VMS /
DVR / NVR, the resolution set on the GV-VMS / DVR / NVR will override the
resolution set on the camera’s Web interface. You can only change the resolution
settings through the Web interface when the connection to the GV-VMS / DVR / NVR
is interrupted.

iii
Note for Installing Camera Outdoor
When installing the camera outdoor, be sure that:
1. The camera is set up above the junction box to prevent water from entering the
camera along the cables.
2. Any PoE, power, audio and I/O cables are waterproofed using waterproof silicon
rubber or the like.
3. The screws are tightened and the cover is in place after opening the camera
cover.

1
1. GV-EBD2702 / 4700 / 4711
The H.265 Target Eyeball Dome is an outdoor, network camera equipped with an
automatic IR-cut filter and IR LEDs for day and night surveillance. GV-EBD2702 /
4711 adheres to IP67 standards, whereas GV-EBD4700 adheres to IP66. The camera
supports H.265 video codec to achieve better compression ratio while maintaining
high quality image at reduced network bandwidths. With its WDR Pro (WDR for
GV-EBD2702), it can process scenes with contrasting intensity of lights and produce
clear image.
For GV-EBD4711, with its motorized lens, the user can zoom and focus the camera
from the Web interface. The camera also provides built-in micro SD card slot for local
storage.
Model No.
Specifications
Description
GV-EBD2702
Fixed lens
Fixed Iris, f: 2.8 mm,
F/1.8, M12 Lens Mount
2 MP, H.265,
Low Lux, WDR
GV-EBD4700
Fixed lens
4 MP, H.265,
Low Lux, WDR Pro
GV-EBD4711
Motorized
varifocal lens
Fixed Iris, f: 2.7 ~ 12 mm,
F/1.4, M12 Lens Mount
4 MP, H.265,
Low Lux, WDR Pro

2
1.1 Packing List
•H.265 Target Eyeball Dome
•Screw x 3
•ScrewAnchor x 3
•Drill Template Paster
•Waterproof Rubber Set
•Download Guide
•Warranty Card

GV-EBD2702 / 4700 / 4711
3
1
1.2 Optional Accessories
Optional accessories can expand the capabilities and versatility of your GV-EBD2702
/ 4700 / 4711. Contact your dealer for more information.
Model Number
Name
Details
GV-Mount211P
Wall Mount Bracket
Dimensions: 233 x 126 x 126
mm (9.2” x 5” x 5”)
Weight: 1.0 kg (2.2 lb)
GV-Mount212P
Wall Box Mount
Dimensions: Ø 126 x 36mm
(5.0” x 1.4”)
Weight: 0.22 kg (0.48 lb)
GV-PA191
Power over Ethernet (PoE)
Adapter
GV-PA191 is a Power over
Ethernet (PoE) adapter
designed to provide power to
the IP device through a single
Ethernet cable.
GV-POE Switch
GV-POE Switch is designed to provide power along with
network connection for IP devices. GV-PoE Switch is available
in various models with different numbers and types of ports.
Power Adapter
Contact our sales representatives for the countries and areas
supported.

4
1.3 Overview
1.3.1 GV-EBD2702 / 4700
Figure 1-1
No.
Description
1
Bottom ring
2
Housing
3
Lens
4
Infrared indicator
5
Power connector (DC 12 V)
6
Ethernet connector / PoE
Note: To power the camera using the power connector (No.5), an optional power
adapter is required.

GV-EBD2702 / 4700 / 4711
5
1
1.3.2 GV-EBD4711
Figure 1-2
No.
Description
1
Bottom ring
2
Housing
3
Microphone
4
Lens
5
Power connector (DC 12 V)
6
Ethernet connector / PoE
7
Micro SD card slot and default button compartment
8
Default button
9
Micro SD card slot
Note: To power the camera using the power connector (No.5), an optional power
adapter is required.
8

6
1.4Installation
The Target Eyeball Dome is designed for outdoors. With the standard package, you
can install the camera on the ceiling. Or you can purchase optional mounting
accessories to mount GV-EBD2702 / 4700 / 4711 on a wall.
Below are the instructions for Ceiling Mount. There are two kinds of Ceiling Mount:
Concealed Installation and Open Installation. In Concealed Installation, the cables
are hidden in the ceiling. In Open Installation, the cables are led out from the open slot
on t he bottom ring.
1.4.1 GV-EBD2702 / 4700 Installation
For Concealed Installation
1. Stick the drill template paster to the ceiling and drill three holes according to the
drill template.
Drill Template Paster
Figure 1-3
2. Insert the screw anchors.
Drill a hole to lead cables out of the ceiling
Knock in screw anchors
Figure 1-4

GV-EBD2702 / 4700 / 4711
7
1
3. Remove the bottom ring by turning it anticlockwise.
Bottom Ring
Figure 1-5
4. Connect the cables and secure the camera.
Connect the cables and protect
them with waterproof tape
Attach the camera to ceiling
with screws
Figure 1-6
5. Adjust the monitoring direction.
The camera can rotate
360 degrees horizontally
The lens can rotate 80
degrees vertically
Figure 1-7

8
6. Mount the bottom ring.
Push the bottom ring back up and turn
it clockwise to lock into position
Figure 1-8
For Open Installation
Lead the cables out from the open slot on the bottom ring before screwing the camera
to the ceiling as shown in step 4 of Conceal Installation.
Open slot on the bottom ring
Lock
Figure 1-9

GV-EBD2702 / 4700 / 4711
9
1
1.4.2 GV-EBD4711 Installation
For Concealed Installation
1. Stick the drill template paster to the ceiling and drill three holes according to the
drill template.
Drill Template Paster
Figure 1-10
2. Insert the screw anchors.
Drill a hole to lead the cables out of the ceiling
Knock in screw anchors
Figure 1-11
3. Loosen the fixing screw and remove the housing by turning it to the position as
shown.
1
Figure 1-12

10
4. Secure the bottom ring to the ceiling with 3 supplied screws and connect the
cable.
Connect cable and protect
it with waterproof tape
Attach bottom ring to
ceiling with taping screws
(Optional) insert a
micro SD card
Figure 1-13
5. Mount the housing by adjusting to the position as shown and press and turn to
anywhere but .
1
Figure 1-14
6. Adjust the monitoring direction. Then tighten the screw.
Figure 1-15

GV-EBD2702 / 4700 / 4711
11
1
For Open Installation
Lead the cables out from the open slot on the bottom ring before screwing the camera
to the ceiling as shown in step 5 of Concealed Installation.
Open slot on the bottom ring
Figure 1-16
Note: You can optionally purchase GV-Mount211 or GV-Mount212 for Wall Bracket
Mount. For details, see its User’s Manual.

12
The Bullet IP Camera is an outdoor, fixed, network camera equipped with an
automatic IR-cut filter and an IR LED for day and night surveillance. The camera
supports H.265 video codec to achieve better compression ratio while maintaining
high quality image at reduced network bandwidths. The camera adheres to IP66
standards and can be powered through PoE.
Model No.
Specifications
Description
GV-ABL2701
Fixed lens
Fixed Iris, f: 4.0 mm,
F/1.8, M12 Lens Mount
2 MP, H.265,
Low Lux, WDR
GV-ABL4701
Fixed lens
Fixed Iris, f: 4.0 mm,
F/1.8, M12 Lens Mount
4 MP, H.265
Low Lux, WDR
GV-ABL4712
Motorized
varifocal lens
Fixed Iris, f: 2.8~12 mm,
F/1.4, M14 Lens Mount
4 MP, H.265
Low Lux, WDR Pro
2. GV-ABL2701 / GV-ABL4701

GV-ABL2701 / GV-ABL4701 / GV-ABL4712
13
2
2.1 Packing List
•Bullet IP Camera
•Waterproof Rubber Set
•Screw Kit
•Drill Template Paster
•Download Guide
•Warranty Card

14
2.2 Optional Accessories
Optional accessories can expand the capabilities and versatility of your camera.
Contact your dealer for more information.
Model Number
Name
Details
GV-Mount502 (for
GV-ABL2701 / 4701)
Wall Mount Bracket
Dimensions: 93 x 93 x 39 mm
(3.66” x 3.66” x 1.53”)
Weight: 0.235 kg (0.52 lb)
GV-Mount503 (for
GV-ABL4712)
Wall Mount Bracket
Dimension: 125 x 125 x 55 mm
(4.9” x4.9” x2.2”)
Weight: 0.74 kg (1.63lb)
GV-PA191
Power over Ethernet (PoE)
Adapter
GV-PA191 is a Power over
Ethernet (PoE) adapter
designed to provide power to
the IP device through a single
Ethernet cable.
GV-POE Switch
GV-POE Switch is designed to provide power along with
network connection for IP devices. GV-POE Switch is available
in various models with different numbers and types of ports.
Power Adapter
Contact our sales representatives for the countries and areas
supported.

GV-ABL2701 / GV-ABL4701 / GV-ABL4712
15
2
2.3 Overview
2.3.1 GV-ABL2701 / 4701
Figure 2-1
Note: To power the camera using the power connector (No.1), an optional power
adapter is required.
No.
Description
1
Power connector (DC 12 V)
2
Ethernet connector / PoE