geratech EGE-UHD-642FS User manual

EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching

EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate.
Egerate assumes no responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Egerate assumes no responsibility for any inaccuracies that may be contained in this
document. Egerate also makes no commitment to update or to keep current the information
contained in this document.
Egerate reserves the right to make improvements to this document and/or product at any
time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval
system, or any of its part translated into any language or computer le, in any form or by
any means—electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—
without express written permission and consent from Egerate.
© Copyright 2012 by Egerate.
All Rights Reserved.
Version 1.0 October 2009
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the
companies with which they are associated.

EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment
and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re, electrical shock and
injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots
in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed
upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit
housing that provide ventilation and allow for sufcient space for air to circulate around
the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 14/09/15 Preliminary Release

EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
CONTENTS
1. Introduction......................................................................................1
2. Applications .....................................................................................1
3. Package Contents............................................................................1
4. System Requirements.....................................................................1
5. Features............................................................................................2
6. Operation Controls and Functions ................................................3
6.1 Front Panel...................................................................................3
6.2 Rear Panel....................................................................................5
6.3 OSD Menu....................................................................................6
6.4 Remote Control .......................................................................... 11
6.5 RS-232 Protocols .......................................................................12
6.6 Telnet & RS-232 Commands......................................................13
6.7 Telnet Control .............................................................................18
6.8 Web GUI Control ........................................................................20
7. Connection Diagram......................................................................22
8. Specifications ................................................................................23
9. Acronyms .......................................................................................25

1
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
1
1. INTRODUCTION
The 6 by 2 HDMI matrix which allows HDMI signal from any of its six sources to be routed
to and displayed on any of its two connected HDMI displays simultaneously with View All
Mode and Picture-in-picture(PIP) supported. With fast switching technology the device can
greatly eliminate the time required by swapping or turning ON/OFF the connected displays.
It supports 4Kx2K, 3D, 36-bit Deep Color, Hi-Def lossless audio and other features dened
by HDMI specications. The management of source/sink scenarios can be operated easily
through on-panel buttons, IR remote control, RS-232 or Ethernet protocol.
2. APPLICATIONS
• Home Theater/Entertainment
• Lecture Room/Hall Presentation
• Show Room/Demo Room
• Public Commercial Display
• Information Board
3. PACKAGE CONTENTS
• 6 by 2 HDMI 4Kx2K Matrix
• Remote Control with Battery
• Left & Right Rack Ears
• 5V/2.6A DC Power Adaptor
• IR Receiver Cable
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipments such as Blu-ray/DVD/PS3 player or Set-Top-Box and output
HDMI TV/Display and or audio amplier with connection cables.

2
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
2
5. FEATURES
• HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant
• Support six HDMI inputs and two HDMI outputs
• Displays any of six (6) High-Denition sources on two (2) HDTV displays simultaneously
with fast switch
• When in Preview mode, the system will be treated as Switcher (two HDMI output same
images at the same time)
• In Preview mode, it support View All (1 Main video source and 5 Sub video sources) and
PIP (1 Main video source and 1 Sub video source). 3D and 4K2K sources inputs are not
supported for sub-windows
Note: View All is TDM (Time Division Multiplexing display)
• 3DTV Pass-Through
• Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30 & 4096x2160@30Hz,
50/60 @YUV420)
• Supports Optical audio extraction
• Supports Optical audio sampling rate output up to 192kHz
• Supports data rate from 300Mbps to 3Gbps and Deep Color up to 1080p 36-bit
• Supports individual EDID or common EDID
• Supports LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH (Pass through),
Dolby TrueHD and DTS-HD Master Audio
• Supports 6 sets of Matrix preset functions for input/output setting
• Input port HDCP support Standard and Apple mode. The Apple mode selection to
guarantees the use of Apple devices
• Compliant with DVI source
Note: Support HDMI to DVI conversion when HDMI source is non-deep color and color
space RGB.
Not support HDMI to DVI conversion when HDMI source is deep
color and color space YCbCr 444/422
• Supports OSD on output B under Preview Mode

3
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
6X2 HDMI MATRIX FAST SWITCH CDPS-6H2HFS
IN 1IN 2IN 3IN 4IN 5IN 6 MUTE TAKE
OUT A OUT B CANCEL
ENTER
MENU
PRESET
ALL
MODE
LOCK
+
-
4K UHD
1 2 5 6 8 1113 153
4 7 9 10 12 14
1POWER: Press this button to turn ON the device and the LED will illuminated.
2IR Window: This IR Receiver receives the IR signal from the package included remote
control only.
3IN 1~6: Press these IN buttons to select an input from the 6 input sources.
4OUT A/B: Press these buttons once a time along with an IN buttons to select an input
source for an output display. i.e. OUT A→IN1→TAKE or OUT B→IN6→TAKE.
5MUTE: Press this button to mute both video and audio on OUT A or B.
6TAKE: Press this button to conrm the selection of an IN and an OUT button.
7CANCEL: Press this button to cancel the IN/OUT selection.
8ENTER: Press to conrm the selection.
9MENU: Press to enter into the menu.
10 +/-: Press these buttons to move up/down under menu selection.
11 PRESET: (PV MUTE: Preview ON/OFF)
•When select the MODE in Preview mode, press the button to turn ON/OFF the Sub
video windows.
•When select the MODE in Matrix mode, press “PRESET” to switch between Normal
and Preset mode.
•Normal mode:
Press OUT A or OUT B or ALL and then press IN 1~6 or MUTE to select the input
sources. After the selection, press “TAKE” to conrm the selection or press
“CANCEL” to cancel the selection.
•Preset mode:
Press “PRESET”, the OLED menu will show Preset then select IN 1~6. Preset 1~6
after the selection, press “TAKE” to conrm the selection or press “CANCEL” to
cancel the selection.

4
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
4
12 All: (SWAP)
Press this button to select all outputs to display with an input source. When in PIP
mode, press to swap between Main video source and Sub video source.
13 MODE: Press to switch between Preview or Matrix mode.
•Preview mode: From MENU option select View All (1 Main video sources and 5 Sub
video sources) or PIP mode (1 Main video sources and 1 Sub video sources).
Note: Under Preview mode, OSD display on output B only.
•View All: Press IN 1~6 or MUTE to select the Main channel. From OLED menu
select “Preview Position” for Sub screens position.
Note: All sub screens will be display rotatively for about 0.5 second and those
screens that are not rotatived will be freezed.
•PIP: Press OUT A (Main) or OUT B, then press IN1~6 or MUTE to select Main or
Sub video source. Press “ALL” or Remote Control “ SWAP” to exchange Main/Sub
video source.
Note: When both Main and Sub select the same input source, Sub will be
muted.
•Matrix mode: Press OUT A or OUT B or OUT A & B and then press IN 1~6 or MUTE to
select the input sources. After the selection, press “TAKE” to conrm the selection or press
“CANCEL” to cancel the selection.
14 LOCK: Press this button to lock all button functions on the panel. Press 3 seconds to
relieve the lock function.
15 LCM: Displaying Input and Outputs selection and menu selection.

5
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
5
CONTROLSERVICE
HDMI IN HDMI OUT S/PDIF OUT
AB
123456AB RS232 IR IN DC 5V
1 4 5 6 7 8
2 3
6.2 Rear Panel
1HDMI IN: Connect from source equipments such as Blu-ray/DVD/PS3 players, Set-Top-
Box or any HDMI equipped source device for input signal sending.
2HDMI OUT: Connect to HDMI TV/display or HD Amplier for output image and or audio
display.
3S/PDIF OUT: Connect to audio sound system or Amplier for digital output sound.
4SERVICE: This slot is reserved for rmware update use only.
5CONTROL: Connect from PC/Laptop with active internet service for Web GUI control
with RJ-45 terminated cable.
6RS232: Connect from PC/Laptop for RS-232 command sending to control the device.
7IR IN: Connect the IR Receiver included in the package for IR signal receive from the
included remote control.
8DC 5V: Connect the adaptor with power cord included in the package and connect to
AC wall outlet for power supply.

6
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
6
Main Menu Sub Menu Description Default
EDID Mode All All Input port is using
same EDID.
In menu “EDID All”,
can select suitable
EDID.
All
Appoint Each Input port can
select individual
EDID.
In menu “EDID
IN1~6” select
suitable EDID.
Exit
Exit Sink A Copy Output A
display EDID
8/2D/PCM/1080p
Sink B Copy Output B
display EDID
8/2D/PCM/720p Standard EDID,
Content: deep
color/2D3D/audio/
native resolution
8/2D/PCM/AC3/720p Standard EDID,
Content: deep
color/2D3D/audio/
native resolution
8/2D/PCM/1080p Standard EDID,
Content: deep
color/2D3D/audio/
native resolution
8/2D/PCM/
AC3/1080p
Standard EDID,
Content: deep
color/2D3D/audio/
native resolution
8/2D/PCM/4K2K Standard EDID,
Content: deep
color/2D3D/audio/
native resolution
6.3 OSD Menu

7
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
7
Main Menu Sub Menu Description Default
8/2D/PCM/
AC3/4K2K
Standard EDID,
Content: deep
color/2D3D/audio/
native resolution
8/2D/PCM/Y420 Standard EDID,
Content: deep
color/2D3D/audio/
native resolution
8/2D/PCM/AC3/
Y420
Standard EDID,
Content: deep
color/2D3D/audio/
native resolution
Exit
EDID IN1 Same EDID All Select Input 1’s EDID Same EDID All
EDID IN2 Same EDID All Select Input 2’s EDID Same EDID All
EDID IN3 Same EDID All Select Input 3’s EDID Same EDID All
EDID IN4 Same EDID All Select Input 4’s EDID Same EDID All
EDID IN5 Same EDID All Select Input 5’s EDID Same EDID All
EDID IN6 Same EDID All Select Input 6’s EDID Same EDID All
Matrix Preset Preset 1 IN / OUT default No.1 A=1 , B=2
Preset 2 No.2 A=1 , B=2
Preset 3 No.3 A=1 , B=2
Preset 4 No.4 A=1 , B=2
Preset 5 No.5 A=1 , B=2
Preset 6 No.6 A=1 , B=2
Exit
HDCP Input IN1 Standard/Apple Set IN1 in Apple/
Standard mode
Standard
IN2 Standard /Apple Set IN2 in Apple/
Standard mode
Standard
IN3 Standard /Apple Set IN3 in Apple/
Standard mode
Standard
IN4 Standard /Apple Set IN4 in Apple/
Standard mode
Standard

8
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
8
Main Menu Sub Menu Description Default
IN5 Standard /Apple Set IN5 in Apple/
Standard mode
Standard
IN6 Standard /Apple Set IN6 in Apple/
Standard mode
Standard
Exit
Preview Mode View All 1 Main video source
and 5 Sub video
source
View All
PIP 1 Main video source
and 1 Sub video
source
Exit
Preview Position View
ALL
Top Preview 5 Sub
screens position
Top
Right Preview 5 Sub
screens position
Bottom Preview 5 Sub
screens position
Left Preview 5 Sub
screens position
PIP Top Left Preview Sub screen
position
Top Left
Top Right Preview Sub screen
position
Bottom Right Preview Sub screen
position
Bottom Left Preview Sub screen
position
Exit
OSD Transparency 0~15 Preview OSD
background
transparency
6
Exit
Note: Under Preview mode, OSD display on output B only.

9
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
9
Main Menu Sub Menu Description Default
5~20 Preview with OSD
Info 5-20 sec and
disappear
OSD Always
On
Preview with OSD
Info remain ON
Exit
Network Setup IP Mode DHCP , Static DHCP
OP Setup Static IP 192.168.5.83
Mask Setup Static
Netmask
255.255.255.0
Gate Setup Static
Gateway
192.168.5.254
Do Re-Link Re-Link
After Setup Network,
the system need to
re-link
---
Exit
Network Status Link Network status
DHCP , Static or Not
Linked
---
IP Get IP ---
Mask Get Netmask ---
Gate Get Gateway ---
MAC System MAC
Address
---
Exit
Source Detection IN1 On/Off ,
IN2 On/Off
IN1 , IN2 detect
source with/without
the signal
---
IN3 On/Off ,
IN4 On/Off
IN3 , IN4 detect
source with/withour
the signal
---
cv

10
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
10
Maın Menu Sub Menu Description Default
IN5 On/Off ,
IN6 On/Off
IN5 , IN6 detect
source with/without
the signal
Exit
Sink A Info Type, Manuf Detect and Analysis
Output A display's
EDID
Content: type (HDMl/
DVı/VGA).
Manufactory/Model
number
---
Native Content: native
resolution
Video Format Content: deep color,
2D or 3D , 4K2K
Audio Format Content:PCM,
BitStream, HBR
Exit
Sink B Info Same Sink A
Info
Detect and Analysis
Output B display's
EDID
---
Fİrmware FW Version Display the model
number and FW
version
---
Update FW Update
Exit
Factory Reset Do Reset Do system Reset ---
Exit
Exit

11
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
11
6.4 Remote Control
1POWER: Press this button to switch
the system ON/OFF.
2OUT A/B: Press these buttons once a time along with an IN
buttons to select an input source for an output display.
3MODE: Press to switch between Preview or Matrix mode.
•Preview mode: From MENU option select View All (1 Main
video sources and 5 Sub video sources) or PIP mode
(1 Main video sources and 1 Sub video sources).
•View All: Press IN 1~6 or MUTE to select the Main
channel. From OLED menu select “Preview Position” for
Sub screens position.
•PIP: Press OUT A (Main) or OUT B, then press IN1~6
or MUTE to select Main or Sub video source. Press “ALL”
or Remote Control “ SWAP” to change Main/Sub video source.
•Matrix mode: Press OUT A or OUT B or OUT A & B and then press IN 1~6 or MUTE to
select the input sources. After the selection, press “TAKE” to conrm the selection or press
“CANCEL” to cancel the selection.
4PV DISP: Press to set ON/OFF the Preview Display.
5SWAP: In PIP mode, press to swap Main/Sub video source.
6MENU: Press to enter into the menu.
7ENTER: Press to conrm the selection.
8ALL: Press this button to select all outputs to display with an input source.
9TAKE: Press this button to conrm the selection of an IN and an OUT button.
10 CANCEL: Press this button to cancel the IN/OUT selection.
11 PRESET:
•When select the MODE in Matrix mode, press “PRESET” to switch between Normal
and Preset mode.
IN 3
IN 5
MUTEENTER -
OUT A
OUT B
MODE
PV DISP. PRESET IN 4
SWAP LOCK
ALL IN 1
TAKE IN 2
CANCEL
+MENUIN 6
CR-136
1
15
14
13
2
3
4
5
6
7
8
9
10
11
12

12
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
12
•Normal mode:
Press OUT A or OUT B or ALL and then press IN 1~6 or MUTE to select the input
sources. After the selection, press “TAKE” to conrm the selection or press
“CANCEL” to cancel the selection.
•Preset mode:
Press “PRESET”, the OLED menu will showing Preset and select IN 1~6. After
preset 1~6, press “TAKE” to conrm the selection or press “CANCEL” to cancel the
selection.
12 LOCK: Press this button to lock all button functions on the panel. Press 3 seconds to
relieve the lock function.
13 +/-: Press these buttons to move up/down under menu selection.
14 IN1~6: Press the IN buttons to select an input from the 6 input sources.
15 MUTE: Press this button to mute both video and audio on the selected OUT A/B
selected.
6.5 RS-232 Protocols
Baud Rate: 115200bps
Data bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
EGE-UHD-642FS
►
◄
Remote Control
PIN Assignment PIN Assignment
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC

13
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
13
Command Name Description Description of Parameter
P0 POWER OFF NONE
P1 POWER ON NONE
IPCONFIG DISPLAY THE CURRENT
IPCONFIG
NONE
SIPADDR XXX.XXX.XXX.
XXX
SET ETHERNET
ADDRESS
XXX=0-255
SNETMASK XXX.XXX.XXX.
XXX
SET ETHERNET
NETMASK
XXX=0-255
SGATEWAY XXX.XXX.XXX.
XXX
SET ETHERNET G
ATEWAY
XXX=0-255
HTTPPORT SET CURRENT HTTP
PORT NUMBER
NONE
HTTPPORT N SET CURRENT HTTP
PORT NUMBER TO N
N=0-65535
TELNETPORT SHOW CURRENT
TELNET PORT NUMBER
NONE
TELNETPORT N SET CURRENT TELNET
PORT NUMBER TO N
N=0-65535
RSTIP IP CONFIGURATION
RESET TO <DHCP>
NONE
A N SET OUTPUT A SOURCE N=1-6 inputs, 0 fot Mute
B N SET PUTPUT B SOURCE N=1-6, 0 for Mute
I N SET ALL OUTPUTS
SOURCE
N=1-6, 0 for Mute
EDIDMODE SHOW EDID MODE NONE
EDIDMODE N SET EDID MODE N=(0) Appoint (1) All
EDIDALL SHOW EDID MODE
SOURCE FOR ALL
NONE

14
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
14
Command Name Description Description of Parameter
EDIDALL N SET EDID CONTENT FOR
ALL
N=0-9
(0) Sink A, (1)Sink B, (2)
8/2D/PCM/720p, (3)8/2D/
PCM/AC3/720p, (4) 8/2D/
PCM/1080p, (5)8/2D/PCM/
AC3/1080p, (6)8/2D/PCM/
AC3/4K2K, (7)8/2D/PCM/
AC3/4K2K, (8)8/2D/PCM/
Y420, (9)8/2D/PCM/AC3/
Y420
EDIDIN SHOW ALL INPUT EDID
SOURCE
NONE
EDIDIN N1 SHOW INPUT N1 EDID
SOURCE
N1=1-6
EDIDIN N1 N2 SET INPUT N1 EDID
SOURCE
N1=1-6
N2=0,9
(0)Sink A, (1)Sink B, (2)
8/2D/PCM/720p, (3)8/2D/
PCM/AC3/720p, (4) 8/2D/
PCM/1080p, (5)8/2D/PCM/
AC3/1080p, (6)8/2D/PCM/
AC3/4K2K, (7)8/2D/PCM/
AC3/4K2K, (8)8/2D/PCM/
Y420, (9)8/2D/PCM/AC3/
Y420
HDCPIN SHOW ALL INPUT HDCP
STATUS
NONE
HDCPIN N1 SHOW INPUT N1 HDCP
STATUS
N1=1-6
HDCPIN N1 N2 SET INPUT N1 HDCP
ON/OFF
N1=1-6
N2=(0)OFF (ON)

15
EGE-UHD-642FS
6×2 4K UHD HDMI Matrix with Fast Switching
15
Command Name Description Description of Parameter
PRESET SHOW ALL PRESET
CONFIG
NONE
PRESET N1 RECALL PRESET N1 N1=1-6
PRESET N1 N2 SET PRESET N1
CONFIGURE
N1=1-6
N2=AXBX (X=1-6)
PVMODE SHOW PREVIEW
MODE
NONE
PVMODE N1 SET PREVIEW MODE N1=(0) View All/(1) PIP
PVPOS SHOW PREVIEW
POSITION
NONE
PVPOS N1 SET PREVIEW POSITION N1=0-3
In View All mode:
(0) Top
(1) Right
(2) Bottom
(3) Left
In PIP Mode:
(0) Top Left
(1) Top Right
(2) Bottom Right
Bottom Left
PVSRC SHOW PREVIEW
SOURCE SELECT
NONE
PVSRC N1 In View All Mode:
SET MAIN SCREEN
SOURCE
In PIP Mode: SHOW
MAIN/SUB SCREEN
SOURCE
N1=INPUT 1-6
N1= (0)MAIN/(1)SUB