geratech EGE-DVI-142DL-144DL User manual

1×2-1×4 Dual-link DVI Splitter
EGE-DVI-142DL-144DL

1×2-1×4 Dual-link DVI Splitter
EGE-DVI-142DL-144DL

1×2-1×4 Dual-link DVI Splitter
EGE-DVI-142DL-144DL
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate.
Geratech assumes no responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Geratech assumes no responsibility for any inaccuracies that may be contained in
this document. Geratech also makes no commitment to update or to keep current the
information contained in this document.
Geratech reserves the right to make improvements to this document and/or product at any
time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval
system, or any of its part translated into any language or computer le, in any form or by
any means—electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—
without express written permission and consent from Geratech.
© Copyright 2011 by Geratech.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the
companies with which they are associated.

1×2-1×4 Dual-link DVI Splitter
EGE-DVI-142DL-144DL
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment
and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re, electrical shock and
injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots
in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed
upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit
housing that provide ventilation and allow for sufcient space for air to circulate around
the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YYYY SUMMARY OF CHANGE
RDV1 06/10/11 Preliminary Release
RDV2 15/03/12 Add 4DDS

1×2-1×4 Dual-link DVI Splitter
EGE-DVI-142DL-144DL
CONTENTS
1. Introduction..........................................................................1
2. Applications .........................................................................1
3. Package Contents ...............................................................1
4. System Requirements.........................................................1
5. Features................................................................................1
6. Operation Controls and Functions ....................................2
6.1 Front Panel ......................................................................2
6.2 Rear Panel........................................................................2
7. Connection and Installation ...............................................3
8. Specications ......................................................................5
9. Acronyms .............................................................................5

1×2-1×4 Dual-link DVI Splitter
EGE-DVI-142DL-144DL
1
1. INTRODUCTION
The Dual-Link DVI splitter allows a single DVI-D signal to be split into two/four DVI outputs.
Accept both Single-Link and Dual-Link DVI signal with supporting the highest resolution of
WQXGA for Dual-Link and WUXGA@RB for Single-Link DVI this wonderful device allows
users with a multi-screen viewing.
2. APPLICATIONS
• Commercial advertising, displaying
• Lecture room display
• Showroom display
3. PACKAGE CONTENTS
• Dual-Link DVI Splitter
• 5V/2.6A or 4A DC adaptor
• Operation manual
4. SYSTEM REQUIREMENTS
Input source equipments such as PC and output DVI display with DVI cables
5. FEATURES
• Supports video resolutions up to WQXGA with Dual-Link DVI or WUXGA with Single-Link
DVI
• Built-in adaptive equalizer provides long cable support
• Support EDID function
• Individual control of hot plug detect

1×2-1×4 Dual-link DVI Splitter
EGE-DVI-142DL-144DL
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1Dual-Link DVI OUT1: This slot is to connect with DVI output display with DVI cable for
synchronize outputs up to 2/4.
2Dual-Link DVI IN: This slot is to connect with the input source such as PC/Graphic card
with Dual-Link DVI cable.
3LINK LED: This LED will illuminate when the input source has send out signal and the
output display is in power on status.
POWER LED: This LED will illuminate when the device is connected to power adaptor
with AC supply.
DC 5V: Plug the 5V DC power supply included in the package into the unit and connect
it to AC wall outlet.
6.2 Rear Panel
1Dual-Link DVI OUT2~4: This slot is to connect with DVI output display with DVI cable
for synchronize output with OUT 1.
Note: The device will detect OUT 1 as the primary EDID information when both outputs
are connected with active monitor. However, when only 1 output is detected then the
device will treat that as the primary EDID information.
4
5

1×2-1×4 Dual-link DVI Splitter
EGE-DVI-142DL-144DL
3
7. CONNECTION DIAGRAM
,

1×2-1×4 Dual-link DVI Splitter
EGE-DVI-142DL-144DL
4
8. SPECIFICATIONS
Video Bandwidth 2 x 165MHz
Input Port 1 x Dual-Link DVI
Output Ports 2 or 4 x Dual-Link DVI
I/O Support Resolution VGA ~ WQXGA@60 / Dual-Link
VGA~ WUXGA@60RB / SINGLE-LINK
ESD Protection
Human-body Model:
±8 kV (Air-gap discharge)
±4 kV (Contact discharge)
Power Supply 5V/2.6A for 2DDS or 5V/4A for 4DDS DC
(US/EU standards, CE/FCC/UL certied)
Dimensions
125 mm (W) × 102.5 mm (D) × 30 mm
(H)/2DDS
141 MM (W) × 163 MM (D) × 38 MM (H)/4DDS
Weight 288g/2DDS, 670g/4DDS
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0 ºC~40 ºC/32 ºF~104 ºF
Storage Temperature −20ºC~60ºC/−4 ºF~140 ºF
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 6.8 W/2DDS, 17W/4DDS
9. ACRONYMS
ACRONYM COMPLETE TERM
DVI Digital Visual Interface

www.egerate.com www.geratech.eu