GGTR Ampere Full Circle User manual
Device is
Charging
Full Circle is
Charging
Charging Full Circle
Unravel plugged in with Full Circle on top of unravel, it will
charge wirelessly, just like a phone
When you receive Full Circle, it will be approximately 25%
charged. So, the first thing you should do is power it up. You
can charge Full Circle with either a USB-C cable or by placing it
on a Qi-enabled wireless charger. Ampere wireless chargers
have been designed to charge Full Circle at the fastest possible
speeds. When all the LEDs are illuminated, Full Circle is 100%
charged, and you are good to go.
Wireless Charging
Ensure that your device is Qi-enabled before attempting to
wireless charge any devices. Align the charging receiver on
your device with the center of Full Circle on the center of the
circle. Full Circle is designed to work with your device in both
horizontal and vertical alignments to work as a phone stand
on the table or to secure your phone in place while on the go.
Gently pull each of the four elastic bands over the corners of
your phone to hold it in place.
Using Full Circle to Power
Your Devices
• To begin charging, press the power button. If you remove
your device then place it back on Full Circle within 10
minutes, it will charge automatically. After ten minutes, you
will need to press the button to begin charging again.
• You can wirelessly charge and discharge at the same time.
Place Full Circle on a wireless charger and your device on
Full Circle. (Note: The power needs to be at least 20% and
the USB-A and USB-C ports will not work)
• You can wirelessly charge a device at the same time as using
the wired output. However, when using both, the wired
output will take priority and the wireless charging may slow
down.
• When charging Full Circle via the USB-C port, you can use
both the USB-A output and the wireless charging output.
• You cannot use charge Full Circle using the wired USB-C input
and the wireless input at the same time. In this
circumstance, the wired USB-C input will take priority.
Notes on Wireless Charging
You can also charge your wired-charging device using Full
Circle’s USB-A or USB-C output ports. Simply plug in your
device to charge -- when charging with the ports, charging will
start automatically. When your device is fully charged, the
charging will stop automatically. To turn off charging, press
the power button once.
Wired Charging
USB-C Input
& Output
USB-A
Output
• When using USB-A only, the power will be MAX 5V/3A
• When using the USB-C only, the power will be PD 18W
• The USB-A port and the USB-C port share a 5V/3.4A output
-- Full Circle will intelligently determine the power
allocation.
• You cannot use the USB-A port while wirelessly charging
Full Circle and wirelessly charging a device on full circle.
Notes on Wired Charging
• Press the power button to turn on wireless charging
• Hold the power button for three seconds to turn off all
charging
• Press the power button to show battery level for 5 seconds
Each light is an indicator of 25% of battery light:
= 0-25% battery
= 25-50%
= 50-75%
= battery 75-100%
LED Indicator Screen & Power Button
• When the battery capacity is 0-25%, only the 1st LED is
blinking.
• When the battery capacity is 26-50%, the 1st LED is lit and
the 2nd LED is blinking.
• When the battery capacity is 51-75%, the 1st and 2nd LEDs
are lit and the 3rd LED is blinking.
• When the battery capacity is 76-99%, the 1st, 2nd and 3rd
LEDs are lit and the 4th LED is blinking.
• When the battery is 100% fully charged, all the LEDs will
normally on.
When Charging Full Circle
1. While wireless charging the green light will stay illuminated
2. When a device is fully charged the green light will turn off
3. The light will flash green if there is a problem with wireless
charging
Wireless Charging Indicator
Insert Full Circle Power Bank into the power bank pocket and
zipper closed. Make sure the Full Circle wireless output (the
side with the circle) is facing the front of the bag so the back
of the phone pocket aligns with the front of Full Circle.
To keep the temperature lower, we recommend opening the
bottom pocket to promote airflow around the power bank.
Using Full Circle with Side Pocket
Overcharge Protection
Short Circuit Protection
Temperature protection
Foreign Object Detection (wireless output)
To reset, allow Full Circle to discharge completely then recharge fully using the wired
the USB-C port.
Standby Current ≦200uA (Vbat = 3.7V）
Certifications: CE, FCC, ROHS
Temperature range for operation: 0℃- 35℃
Temperature range for storage: -10℃- 60℃
Charging Time: ≤ 5H @ 15W Input or ≤ 8H @ 10W Input
Efficiency: 75+% @ 10W Output
Effective Charging Area D: ≥ 20mm
Effective Charging Distance: 8mm
Other Information and Features
• Read all instructions and warnings prior to using this product. Improper use of
this product may result in product damage, excess heat, toxic fumes, fire or
explosion, for which damages you (“Purchaser”), and not Ampere
(“Manufacturer”) are responsible.
• Do not store/use the device in high-temperature environment, including heat
caused by intense sunlight or other forms of heat.
• Do not disassemble this device or attempt to re-purpose or modify it in any
manner.
• Use with only certified Type-C PD adapters.
• Full Circle is designed for personal use only. It is not suitable for commercial
applications.
• Remove all foreign metal objects from your device before using on Full Circle.
• If this device is used by a minor, it is the sole responsibility of the purchasing
adult to provide supervision, instructions, and warnings. The purchaser agrees to
hold the Manufacturer harmless for any claims/damages resulting from misuse
by a minor.
• Products have undergone rigorous quality assurance inspections. If the device is
excessively hot, is emitting odor, is deformed, or is experiencing or
demonstrating an abnormal phenomenon, immediately stop all product use and
contact Manufacturer.
Warnings
This product is meant for use only in conjunction with the appropriate devices. Please
consult your device packaging to determine whether this product is compatible with
your particular device. Manufacturer is not responsible for any damages to any device
incurred through the use of thisproduct. Manufacturer shall not in any way be liable to
you or to any third party for any damages you or any third party may suffer as a result
of use, intended or unintended, or misuse of this product in conjunction with any device
or accessory other than the appropriate device for which this product is designed.
Manufacturer will not be responsible for any damages you or any third party may suffer
as a result of misuse of this product as outlined above. Purchaser agrees to defend,
indemnify, and hold Manufacturer harmless for any claims or damages arising from
unintended use or misuse, including use with an unintended device.
Legal
This device complies with Part 15 of the FCC Rules. Operation of this product is subject
to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation. Warning: Changes or modifications not expressly approved
by the party responsible for compliance with the FCC Rules could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC Information
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body
