GIA Giatsu GIA-J105 User manual

OWNER’S MANUAL
WIRED CONTROLLER
GIA-J105
ENGLSIH
Thanks for choossing our product.
Please, read carefully this manual
before using the product

The remote controller transmits signals to the system.
Remote controller
01
13 SUPER BUTT ON
Used to start or stop the fast cooling/heating.
(Fast cooling operates at high fan speed with
18ćset temp automatically ; Fast heating
operates at auto fan speed with 32ćset temp
automatically )
J1
4.2
Remote controller
Indication symbols on LCD:
Note: Each mode and relevant function will be further specied in following pages.
Signal transmit
Dry indicator
Fan only indicator
Heating indicator
Cooling indicator
High fan speed
Medium fan speed
Low fan speed Display set temperature
Display is invalid
Display set timer
Display current time
Auto fan speed Smart indicator
Sleep indicator
Ifeel
Super indicator
ON
OFF
10
11
13
14
3
4
ON/OFF
MODE FAN
SLEEP SUPER
SMART IF E E L DI MME R
TIMER ON TIMER OFF CLOCK
ON
OFF
ON
OFF
1
2
6
7
5
8
9
12
15
14 DIMMER BUTT ON
The screen brightness is decreased each time
that button is pressed and it goes blank after
pressing the button four times.
1
2
4
3
12
5
6
11
7
8
9
10
SWING BUTT ON
FAN BUTT ON
ROOM TEMPERA TURE
SETTING BUTT ONS
SLEEP BUTT ON
IFEEL BUTT ON
CLOCK BUTT ON
ON/OFF BUTT ON
SMART BUTT ON
MODE BUTT ON
TIMER ON/OFF BUTT ON
Used to stop or start adjustment
louver swinging and set the desired up/down
airflow direction.
horizontal
15 SWING BUTT ON
Used to stop or start adjustment
louver swinging and set the desired left/right
airflow direction.
vertical
Used to select fan speed in sequence
auto, high, medium or low.
Used to set or cancel Sleep Mode operation.
Used to start or stop the I feel mode.Pressthis
buttonabove5secondsTurnoffIFEELmode
(In I feel mode,the Air Conditioner operates basis
temperature sensor fitted in remote instead of machine,
AdvicetouseIFEELmodeandtheremoteput
wheretheindoorunitreceivesigQaleasily
Used to set the current time.
Used to enter fuzzy logic operation directly,
regardless of the unit is on or off.
The appliance will be started when it is
energized or will be stopped when it is
in operation, if you press this button.
Press this button to select the operation mode.
Used to set or cancel the timer operation.
Used to adjust the room temperature and
the timer, also real time.
SWING
SWING
(invalid for this model)
Note˖Someremotecontrollermodelswithoutbuttonsinthe
dashedcircle

How to Insert the Batteries
How to Use
Remove the battery cover according to the arrow direction.
Insert new batteries making sure that the (+) and (-) of
battery are matched correctly.
Reattach the cover by sliding it back into position.
Note:
Use 2 LR03 AAA(1.5volt) batteries. Do not use rechargeable batteries.
Replace batteries with new ones of the same type when the display
becomes dim.
02
To operate the room air conditioner, aim
the remote controller to the signal receptor.
The remote controller will operate the air
conditioner at a distance of up to 8m when
pointing at signal receptor of indoor unit.
Remote controller
Remote controller
m
m
m
m
m
t
t
t
o
o
o
o
o
o
o
o
r
ON/OFF
MODEFAN
SWINGSLEEPSUPER
SMART IFEELDIMMER
TIMER ONTIMER OFFCLOCK
ON
OFF
ON
OFF
SET TEMP
ROOM
TEMP
C
AUTO
NO.
TIMER ON
TIMER OFF
SET TIMER
A
DEFROST
18K
24K,36K,42K, 60K48K,

Each time MODE button is pressed, the operation mode
is changed in sequence:
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
18℃~32℃
Heating mode is NOT available for cooling only air conditioner.
HEATING
COOLING DRY FAN ONLY
Selecting mode
FAN mode
Auto High Medium Low
At "FAN ONLY" mode, only "High","Medium" and "Low" are available.
At "DRY" mode, Fan speed is set at "Low" automatically, "FAN" button
is ineffective in this case.
Setting temperature
Press once to lower temperature setting by 1℃
Press once to raise temperature setting by 1℃
Range of available set temperature
*HEATING, COOLING
FAN unable to set
SWING, SMART, TIMER ON, TIMER OFF, CLOCK, SLEEP and SUPER operation modes will be
specified in the following pages.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
During heating operation, air flow is not discharged at the beginning. After 2－5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
ONLY
Operation instructions
03
Operation modes
*Note: Heating mode is NOT available for cooling only models.
ON/OFF
MODE FAN
SLEEP SUPER
SMART IFEEL DIMMER
TIMER ON TIMER OFF CLOCK
ON
OFF
ON
OFF
13
2
SWING
SWING

ON/OFF
MODE FAN
SLEEP SUPER
SMART IFEEL DIMMER
TIMER ON TIMER OFF CLOCK
ON
OFF
ON
OFF
Do not turn the horizontal adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the unit
first and cut off the power supply, then restore power supply again.
It is better not to let the adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent
condensed water from dripping.
horizontal
Operation instructions
04
Airflow direction control
4SWING
SWING
4
4
Airflow direction control
Horizontal vertical and airflow is automatically adjusted to a certain
angle in accordance with the operation mode after turning on the unit.
The direction of airflow can be
also adjusted to your own
requirement by pressing the
" " and the " "
button of the remote controller.
Operation mode Direction of airflow
COOLING, DRY
*HEATING,
FAN ONLY
horizontal
downward
SWING SWING
Vertical airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle
as you like.
Swinging airflow
Pressing " " button once, the adjustment
louver will swing up and down automatically.
horizontal
Desired direction airflow
Pressing the " " button again when the louvers swing
to a suitable angle as desired.
Horizontal airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle
as you like.
Swinging airflow
Pressing " " button once, the adjustment
louver will swing left and right automatically.
vertical
Desired direction airflow
Pressing the " " button again when the louvers swing
to a suitable angle as desired.
SWING
SWING
SWING
SWING
Note: invalid for cassette type. Horizontal airflow control is

SMART button is ineffective in SUPER mode.
Press the SMART button, the unit enters SMART mode(fuzzy logic operation) directly regardless of
the unit is on or off. In this mode, temperature and fan speed are automatically set based on the
actual room temperature.
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, a decrease or rise of up to 7 ℃ can be set with the remote controller if you still
feel uncomfortable.
Operation instructions
05
SMART mode
CLOCK button
You can adjust the real time by pressing CLOCK button, then
using and buttons to get the correct time, press
CLOCK button again the real time is set.
ON/OFF
MODE FAN
SLEEP SUPER
SMART IFEEL DIMMER
TIMER ON TIMER OFF CLOCK
ON
OFF
FAN
SWING
SWING
SWING
SWING
Indoor temperature
Indoor temperature
Target temperature
Target temperature
Below T-3℃
Over T+3℃
T+3℃ or below
T
T
T
T
T
Over T+3℃
Operation mode
Operation mode
HEATING
FAN ONLY
FAN ONLY
COOLING
COOLING
Operation mode and temperature are determined by indoor temperature
Heat pump models
Cooling only models
Your feeling
What you can do in SMART mode
button adjustment procedure
Uncomfortable
because of
unsuitable air
flow volume.
Uncomfortable
because of
unsuitable flow
direction.
Uncomfortable
because of
unsuitable flow
direction.
Indoor fan speed alternates among
High, Medium and Low each time this
button is pressed.
Press it once, the adjustment
louver swings to change vertical airflow
direction. Press it again, swings stops.
horizontal
Press it once, the adjustment
louver swings to change horizontal airflow
direction. Press it again, swings stops.
vertical
T-3℃T+3℃≦Tindoor≦

Timer mode
How to set TIMER ON
How to cancel TIMER ON
TIMER ON button can be used to set the timer programming as wished in order to
switch on the appliance at your desired time.
Press TIMER ON button, "ON 12:00" flashes on the LCD, then you
can press the or buttons to select your desired time for
appliance on.
Press the or button once to increase or decrease the time setting by 1 minute.
Press the or button one and a half seconds to increase or decrease the time
setting by 10 minute.
Press the or button for a longer time to increase or decrease the time by 1 hour.
Press the TIMER ON button again, a "beep" can be heard and the indicator disappears,
the TIMER ON mode has been cancelled.
When your desired time displayed on LCD, press the TIMER ON button and confirm it.
A "beep" can be heard.
Note: If you don't set the time in 10 seconds after you press TIMER ON button, the remote controller
will exit the TIMER ON mode automatically.
Note: It is similar to set TIMER OFF, you can make the appliance switch off automatically at your
desired time.
The TIMER indicator on the indoor unit lights up.
"ON" stops flashing.
After the set timer displayed for 5 seconds the clock will be displayed on the LCD
of the remote controller instead of set timer.
It is convenient to set the timer on with TIMER ON buttons when you go out in the morning
To achieve a comfortable room temperature at the time you get home. You can also set
timer off at night to enjoy a good sleep with TIMER OFF.
Operation instructions
Increase
Decrease
i)
ii)
iiI)
ON
06

07
Operation instructions
SLEEP mode
SUPER mode
SLEEP mode can be set in COOLING, HEATING,DRYING operation mode.
This function gives you a more comfortable environment for sleep.
The appliance will stop operation automatically after operating for 8 hours.
In SLEEP mode,
Note: Heating is NOT available for cooling only air conditioner.
fast cooling
fast heating
SUPER mode can be set when the appliance is in operation or energized.
Fast cooling operates at high fan speed, changing the set temperature
automatically to 18
temperature automatically to 32 ℃.
℃;Fast heating operates at auto fan speed,changing the set
In SUPER mode, you can set airflow direction or timer. If you want to
escape from SUPER mode, press SUPER , MODE, FAN, ON/OFF,SLEEP
or TEMPERATURE SETTING button, the display will return to the original
mode.
Note:
The Appliance will continue working in SUPER mode , if you don't escape from it by
pressing any of the buttons mentioned above.
SMART button is not available in SUPER mode.
SLEEP mode
SUPER mode
ON/OFF
MODE FA N
SLEEP SUPER
SMART IFEEL DIMMER
TIME R ON TIME R OFF C LOC K
ON
OFF
ON
ON
OFF
ON
OFF
SUPER mode is used to start or stop fast cooling/fast heating.
SWING
SWING

C./ Industria, 13 l Polígono Industrial El Pedregar
08160 Montmeló
Barcelona (Spain)
Phone: [phone]
Fax: [phone]
inf[email protected]
www.giatsu.com