Giant Turbo-Laser 22700 Series User manual

Series
22700
Turbo Nozzle
1/03 22700.PMD
Model # Nozzle Size
22700-20 #2.0
22700-25 #2.5
22700-30 #3.0
22700-35 #3.5
22700-40 #4.0
22700-45 #4.5
22700-50 #5.0
22700-55 #5.5
22700-60 #6.0
Operating Conditions
Max. Pressure: 3600PSI
Maximum Temperature: 195oF
Weight: 1.4lbs.
Inlet: 1/4" BSPP
Spray Angle: 30o
Repair Kits# Nozzle Includes
09470-XX* (22700-20) #2.0 3,4,7-9
09470-XX* (22700-25) #2.5 3,4,7-9
09470-XX* (22700-30) #3.0 3,4,7-9
09470-XX* (22700-35) #3.5 3,4,7-9
09470-XX* (22700-40) #4.0 3,4,7-9
09470-XX* (22700-45) #4.5 3,4,7-9
09470-XX* (22700-50) #5.0 3,4,7-9
09470-XX* (22700-55) #5.5 3,4,7-9
09470-XX* (22700-60) #6.5 3,4,7-9
* XX Designates nozzle size
MAINTENANCE NOTICE:
If turbo will not spin, take unit apart and clean the nozzle. If turbo still
will not spin, have an authorized distributor repair nozzle.
Parts List
Item Part# Description Quantity
1 06341 Protection Cap 1
2 06342 PressureCasing 1
5 06217 O-Ring 1
6 06343 DrivePlug 1
Note: Item numbers 3, 4, 7-9 are sold in kits
Giant Industries, Inc.
900N.WestwoodAve.
Toledo,Ohio 43607
PHONE: [phone]
FAX: [phone]
www.giantpumps.com
© Copyright 2003 Giant Industries, Inc.
!WARNING !
HIGH PRESSURE
DO NOT POINT
ATINDIVIDUAL
MAYCAUSE
SERIOUS INJURY!

TURBO LASER REPAIR INSTRUCTIONS
1) Whileholdingthenozzle,blowcompressedairintothedischargeendofnozzle.This
willdislodgepressurecasing from protection cap.
2) Usinga 27mmboxedendwrenchunscrewdriveplug(item#6)frompressurecasing
(item#2).
3) Using a 5/16" wooden dowel press out (items 3, 4, 7-9) from the top side of pressure
casing(item#2).
4) Replace(items 3,4,7-9)withpartsfrom kit.
5) Insertassembledkit(items 3,4,7-9)intopressurebell.Pushfirmly intotopside of
pressurebell(item#2).Move assembled kit toonesideofpressure casing. Tighten
drive plug (item #6) back into pressure casing (item #2).