Gigabyte GSmart G1362 User manual

G1362
2QM02-00012-200S
Quick Guide

G1362│
2
Your Phone
This section introduces you to the hardware of the device.
21
3
4
5
6
7
8
No.
Items Functions
1
Earphone Jack
Use a headset for hands-free conversation
or listening to music.
2
Front Camera
Use this front Camera to take pictures or
record video.
3
P Sensor/
Light Sensor
• P Sensor: The screen will turn off
automatically when the device is close to
the face during a phone call.
• Light Sensor: Adjust the brightness of the
screen according to the environment.
4
Receiver The source of voice.
5
LED
• Power status notification.
• Other notification.
(New message/ New email/ Missed call).
6
Touch Screen
Display screen.
7
SmartKey User-defined key. May define these three
keys to be any function or hot key.

G1362│
3
No.
Items Functions
8
MIC
Sound Receiver.
9
Volume
Press upward or downward to turn louder or
down volume. Press down key fully to enter
vibration mode.
10
Power
• Press and hold for several seconds to turn
the phone on or off.
• To set your phone to the sleep mode, press
the power button briefly. Press again to turn
the display back on.
11
Micro-USB
Port
• Connect USB cable and the AC adapter to
charge the battery mildly.
• USB tethering: Share your phone’s mobile
data connection via USB cable.
9
10
11

G1362│
4
12
13
14
15
No.
Items
Fun
ctions
12
Flash LED
Help photo shooting.
13
5
.0
MP
Camera
The camera on the back of the device supports
5.0MP photo and high-quality video.
14
Back Cover
You need to open the cover to install or
uninstall the battery, SIM card and microSD
card.
15
Speaker The source of music and voice.
Installing or uninstalling SIM Card, Battery, and
Memory Card
To remove the back cover
1. Please turn over your phone with the back cover facing up.

G1362│
5
2. Please move your fingertip into the slot.
3. Pull the back cover with your fingertip and remove it.
SIM card
The SIM card contains your phone number, memory storage, and
details of network service.
To install the SIM card
There are two slots for SIM cards. Left slot is for SIM1; right slot is for
SIM2, the gold contacts are facing down. And the cut-off corner is
facing toward the outside.
To install the SIM1 card To install the SIM2 card

G1362│
6
To remove the SIM card
1. First, remove battery.
2. Use your finger to slide the SIM card out of card slot.
Battery
Your phone comes with a rechargeable battery. Battery life varies
depending on the network, used applications, and the type of
connections attached to your phone.
To install the battery
Make sure the gold contact of the battery is close to connectors in the
battery slot.
To remove the battery
Use your fingertip to lift the battery then remove it.
NOTE:
To ensure battery performance and avoid risk from fire
• Use only the original battery designated for the phone.
• Do not store the battery in temperature lower than -10ºC or
higher than 45ºC
Memory card
You may need a microSD card to store photos, music, videos and
other data.
To install the memory card
1. Insert the memory card with the gold contact facing down.
2. Push the memory card until it clicks into slot.

G1362│
7
To remove the memory card
1. For safe removal, tap Application Drawer > Settings > Storage >
Unmount SD card.
2. Push the memory card to eject it from the slot.
Charging the Battery
When you take your phone out of box for the first time, the battery
isn’t at full of power. Please charge the battery fully before using.
1. Connect the USB cable to the AC adapter, and then, connect to the
device via the USB cable.
2. Plug the AC adapter to a socket to start the charge.
NOTE:
To ensure safety, do not remove the battery from the phone
while the AC adapter is connected or while it is being charged.
Turning the Phone On or Off
After installing the SIM card and charging the battery, you are now
ready to turn your phone on.
To turn on your phone
Press and hold the power key until the phone shortly vibrates.

G1362│
8
To turn off your phone
1. Press and hold the power key for several seconds.
2. A pop-up window appears, and then tap Power off.
3. Select OK to confirm.
To set your phone to the sleep mode
To set your phone to sleep mode, press the power key briefly. It will
turn the display off. To turn the display on, press the power key briefly
again.
Notification LED
Types
Descriptions
Solid red light Battery is charging.
Solid green light Battery is full.
Flashing red light Battery is low.
Flashing green light
Notification ( New message/ Missed call/
New email)
The Home Screen
On Home screen, you can quickly access common features and view
notifications of missed calls, received messages, battery, and the
status of the connection.
Status bar icons
The icons of the status bar indicate different types of information. Tap
the status bar and scroll down to view notifications or view system
information.
Types Icons Descriptions
Volume
Mute the call.
Vibration is on.
Wired headset connected.
Wired microphone headset
connected.
Speaker is on.
Battery
Battery is full.

G1362│
9
Battery is low.
Battery is very low.
Battery is charging.
Network
and
Connection
No network signal/ No SIM card
inserted.
Maximum signal strength. Fewer
bars indicate lower signal strength.
GPRS is in progress.
EDGE is in progress.
3G is in progress.
HSDPA is in progress.
Wi-Fi is connected.
Wi-Fi is in progress.
Wi-Fi Network is activated.
Airplane mode.
Call is in progress.
Your call is on hold.
Portable Wi-Fi hotspot is activated.
Both USB tethering and Portable
Wi-Fi hotspot are activated.
GPS is on.
Bluetooth is on.
The device is connected to PC via
the USB cable.

G1362│
10
Notification
New text message.
New e-mail.
New Gmail.
Alarm.
Event notification.
Missed call.
USB debugging is connected.
General notification.
FM radio is on.
Playing a song.
Downloading an application.
Note:
Mobile data interruption, unexpected error in CPU and high
power consumption could be caused by in-app AD in Android
phone. We suggest you try to remove those apps with AD which
had been installed in your device for preventing any abnormal
situation happens and saving more power as well.
If this document is modified, please download the latest version on
GSmart’s official website. You can download the user manual on
GSmart’s official website also.
GIGA-BYTE COMMUNICATIONS INC.
B2, No.207, Sec.3, Pai-Hsin Road,
Hsin-Tien Dist., New Taipei City 231, Taiwan
[phone]
www.gigabytecm.com