Gima CX2X User manual

LETTINO PER BAMBINI
CHILDREN BED
LIT D’ENFANT
CAMA INFANTIL
M43506-M-rev.0-09.22
MANUALE D’USO – ISTRUZIONI E MONTAGGIO
USER MANUAL – ASSEMBLY INSTRUCTIONS
MODE D’EMPLOI – INSTRUCTIONS ET MONTAGE
MANUAL DE USO – INSTRUCCIONES Y MONTAJE
• È necessario segnalare qualsiasi incidente grave verificatosi in relazione al dispositivo medico da noi fornito al
fabbricante e all’autorità competente dello Stato membro in cui si ha sede.
•All serious accidents concerning the medical device supplied by us must be reported to the manufacturer and competent
authority of the member state where your registered office is located.
•Il est nécessaire de signaler tout accident grave survenu et lié au dispositif médical que nous avons livré au fabricant et
à l’autorité compétente de l’état membre où on a le siège social.
•Es necesario informar al fabricante y a la autoridad competente del Estado miembro en el que se encuentra la sede
sobre cualquier incidente grave que haya ocurrido en relación con el producto sanitario que le hemos suministrado.
CX2X (Gima 43506) CX2X (Gima 43507)
Jiangsu Saikang Medical Equipment Co.,Ltd
No. 35 Lehong Road, Modern Agriculture Demonstration
Park, Zhangjiagang City, Jiangsu Province, China
Made in China
SUNGO Europe B.V.
Olympisch Stadion 24, 1076DE
Amsterdam, Netherlands
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
[e-mail] - [e-mail]
www.gimaitaly.com

MANUAL INTRODUCTION
The manual children bed is a bed specially designed for hospitalized children patients or others in need of some
form of health care.
Note:
Please carefully read this manual and strictly follow the steps before installing and using. We require all
users to have the knowledge of user’s manual and all the cautions.
•This manual is applicable to CX2x Children bed. It contains the installation method, operating instructions and
maintenance check points.
•The graphics in this manual are for users’ reference only. In actual use, please refer to the real object.
•This user manual includes the description, instruction, maintenance and technical parameters of the product.
•Any questions, please contact the after-sale service center or distributor. Anyone using or operating this product
should read and comply with it.
•Except for some unexpected situations, users are required to be familiar with the usage and precautions.
ENGLISH

6
ENGLISH
TECHNICAL SPECIFICATION
•Model: CX2X
•Product Weight:90KG
•Material:Powder coated steel structure with PP head and foot board
•Intended user:Children patients
•Frequently used functions:
back-rest lefting and Knee-rest lefting
•Clinical benets:
comfortable feeling for children patients, Simple operation functions and quality assurance.
INSTALLATION INSTRUCTION
Children Bed
Length
mm
1880±10mm
Width 900±10mm
Height 1260±10mm
Tilt range Back /0-75±5
Tilt range Leg / 0-35±5°
Weight Safety load Kg 170
This bed is not suitable for patients weighing less than 10 kg. The maximum
recommended patient weight is145 kg.
The safe working load is calculated as follows :
Maximum patient weight: 145kg
Mattress: 5kg
Accessories (including attached loads): 20kg
TOTAL: 170kg
Bed frame installation: Put the bed surface on the
support frame of the headboard and the footboard, and x
it with M8*20 outer hexagon bolts (8 in total)
Chassis installation: The hole pointed out by arrow is
xedly connected with M8*85 outer hexagon bolts and M8
locking nuts (4 in total)

7ENGLISH
Gas spring and guardrail installation:
1. Fix the gas spring to the bed frame as shown in the
gure, and x it with 4 M10*40 outer hexagon bolts
2. Insert both ends of the guardrail into the gas spring, and
clip it to the bed frame from top to bottom.
Top cover installation:
1. Install the top cover on four corners
Note: When assembling step 3, the gas spring screw cannot be locked, and a gap of 5±1MM should be reserved
so that the gas spring can adjust the position by itself, see Figure 2
FAULTS EXCLUSION
Common failures Probable reasons Excluding methods
Difcult to move the whole baby crib 1. The caster is locked without releasing the brake
2. The caster is damaged
1. release the brake
2. replace the caster
STAINLESS STEEL BABY CRIB-MAINTENANCE
1. In order to use the baby crib safely, it is necessary to perform regular safety inspections on the baby crib. It is
recommended to check it every six months to ensure that the connections are not loose and all operations are
normal.
2. When the baby crib frame ages and it reaches a certain servicing time, which the metal part of the baby crib and
plastic parts of the baby crib frame can be recycle.
3. Avoid scratching the panel with sharp-angle appliances or knives during use, and clean it frequently to keep it clean
and dry.
4. If the panel is accidentally stained with stains, it is recommended to clean it. Do not use alkaline or corrosive
chemicals to clean the baby crib, which will cause the stainless steel surface to rust.
5. Regularly check the casters to avoid hitting or overloading, which will cause damage to the casters.
6. It is forbidden to force the casters to brake when braking, which will cause damage to the brake system.
7. The wear of the tire surface of the wheel can be detected by visual inspection. Some thread spun yarn and other
accumulations may be wrapped around the wheel, remove the bolts and nuts of the wheel, clean up the debris, and
check whether the bearing of the wheel is damaged. If the parts are not damaged, can be reassembled and used.
8. Judging whether the caster is replaced according to the time used, wear and tear, you can replace the wheels
Figure 1 Figure 2

8
and make sure that the axles bolt and nuts are well put together and connected. If possible, use a lock washers or
locknuts to help you with this process.
9. For the casters equipped with brakes, it is necessary to regularly check whether the brakes are working properly.
Check the brakes once a day or before each use. For a baby crib equipped with multiple brake casters, only one
brake caster can be locked at a time which will allow you to try and push the baby crib also check whether one of
the brake performance of each caster is good. If the function of the brake fails due to wear or damage to the wheels,
immediately replace the wheels and then retest the brake system.
10. If the mechanism of the brake system of the caster is damaged, and the brake needs to be repaired or replaced,
please contact our after-sales service department or authorized dealer provide by our company. Every time the
brakes are replaced, the brake performance of the casters must be retested.
PACKAGING, TRANSPORT, STORAGE
1. The packaging of baby crib is carried out according to the contract or product standard.
2. Avoid rushing out, violent vibration, and protection from sunlight and rain during the transportation of the baby crib.
3. The stainless steel baby crib should be stored:
a) Ambient temperature: -10°C ~ +40°C.
b) Relative humidity: ≤ 85%.
c) Atmospheric pressure: 70 kPa ~ 106 kPa.
Explanation of symbols:
Note! Check the le that comes with the bed
Don’t use the device in direct contact with the skin
Symbol picture Symbol description Symbol picture Symbol description
Rotate this handle to control
back plate angle Rotate this handle to control knee plate angle
AFTER-SALES SERVICE
1. Please keep the les that comes with the machine and invoices of this product properly, and you need to
present these materials when the company performs warranty and maintenance for the product.
2. If there is any problem in the process of using, please contact our company in time, so that our company can
provide you with accurate and fast technical support and maintenance services in a timely manner.
3. Do not disassemble the internal device of this product by yourself to avoid unnecessary damage. If you nd
that the use is affected due to quality problems, please contact our after-sales service department or our
authorized dealer.
4. From the date of purchase, if it is indeed damaged or does not work normally due to quality problems within
one year, the company will provide to the users a free repairing of the product
5. Lifetime service from manufacturer: JIANGSU SAIKANG MEDICAL EQUIPMENT CO LTD
Keep away from
sunlight Medical Device compliant with Regulation (EU) 2017/745 Keep in a cool, dry place
Product code Consult instructions for use Manufacturer
Data di fabbricazione Lot number Medical Device
Caution: read
instructions
(warnings) carefully
70kPa
106kPa
Atmospheric pressure limit
0%
85%
%
Humidity limit
Authorized
representative in the
European community
-10˚C
+40˚C
Temperature limit Imported by
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
ENGLISH