Gingerway GW-4325 User manual

Descriptions
Dear users, sincerely thank you for choosing our products. For your convenience of installing and using
this product, please read this manual carefully before use.
Gingerway wireless water leakage sensor is composed of transmitter and probe, it can be installed
on walls which closed to the ground or the surface of others objects. When the proble is submersed
in water or other conductive liquid, the transmitter will immediately hoot and send alarm signal to
SmartC gateway. The battery standby time and reliability are observably improved owes to the ultralow
power consumption technology and two-way wireless communication technology.
This product can be used independently; For network alarm, it must be used with Gingerway SmartC
series of gateways.
Mount the transmitter and probe on the wall which closed to the ground or the surface of others objects
with double faced adhesive tape or screws. The probe is about 5mm above the ground.
Wireless Water Leakage Sensor Instruction
GW-4325
Gingerway Technologies Co.,Ltd
Enjoy the life
Product Structure Diagram
Installation
201708 V1.0
Main Features
√ Z-Ginger® full-digital, highly reliable, large coverage, low power consumption internet of things two-
way wireless network
√ Ultralow power consumption, battery life exceed 10 years
√ Corrosion resistant stainless steel probe
√ Probe separatioin design, easy to set up, moisture-proof and not fear water immersion
√ Anti-pet, anti-insect interference
√ Manual testing function
√ Low battery notication
①
②
③
④1.Transmitter
2.Indicator
3.Probe
4.Test/Bind Button
5.Cell Holder
Inside of Transmitter
Front Side
CR2450
3V
⑤

Power Supply 3VDC (1*CR2450 button cell)
Current Standby current: ≤3μA
Alarm current: ≤30mA
Wireless Operating Frequency 433MHz
Wireless Transmit Power ～10dbm
Wireless Receiving Sensitivity ≤-105dbm
RF Coverage about 30m indoor, 100m barrier free
Operating Temperature -10℃～60℃
Relative Humidity ≤ 80% (Non-condensing)
Dimension of Transmitter (L*W*H) 71mm×35.5mm×19mm
Dimension of Probe(L*W*H) 71mm×12mm×36mm
Total Weight 55g (battery included)
Usage
Technical Parameters
Please bind the smoke sensor with SmartC gateway before use:
Long press the bind button for 5 seconds, the indicator will continuously sticker and send out binding
request. Add a new smart device binding on APP "ZGinger Mini", you can refer to the instruction
manual of SmartC gateway for the detailed procedure.
Short press the test button can send out a testing alarm to SmartC gateway.
Low battery notification: When the sensor in low battery, the low battery signal will be sent to
gateway. The siren of gateway wouldn't hoot while gateway receiving the signal, only the notication
will be sent to user.
Shenzhen Gingerway Technologies Co., Ltd.
Address: 3-Floor, Building A6, Xingye Industrial Park, Zhongshanyuan No.2 Road, Nanshan
District. Shenzhen, Guangdong, China.
Tel :[phone] Fax :[phone]
Website: www.gingerway.com
Gingerway products are guaranteed for 2 years since the date of purchase. During the warranty
period, if Gingerway products malfunction(not contain artificial damages) under normal
circumstances, they can be free repaired or exchanged at local dealer with the purchase invoice.
1. If due to quality failure during the warranty period, the maintenance is free in rst year, only
the component cost will be charged in the second year.
2. Disassembling Gingerway product components without the permission of our company or the
local client center, our company will no longer bear the free warranty responsibility .
Note: Shenzhen Gingerway Technologies Co., Ltd reserves the right of nal explanation for above
terms.
0678
Warranty Terms