GIRBAU HS-6008 User manual

Cod. 429597
Rev. 01/0106
Advanced Operation Instructions
for washers
LOGI CONTROL
GIRBAU, S.A.
Crta de Manlleu, km. 1
08500 VIC (Barcelona) •SPAIN
Tel. [phone]
Fax [phone]
[email protected]
www.girbau.com
For USA & CANADA:
CONTINENTAL GIRBAU Inc.
2500 State Road 44
WI 54904 Oshkosh •USA
Tel. [phone]
Fax [phone]
[email protected]
www.cont-girbau.com
LOGI
Advanced

Cod. 429597
Rev. 01/0106
Model From serial #
High Speed
HS-6008 2.080.001
HS-6013 2.110.001
HS-6017 2.120.001
EH020 1.430.001
EH030 1.460.001
EH040 1.470.001
Medium Speed
MS-610 2.020.001
MS-613 2.030.001
MS-617 2.040.001
MS-623 2.050.001
EM025 1.370.001
EM030 1.380.001
EM040 1.390.001
EM055 1.400.001

Cod. 429597
Rev. 01/0106
3
Index
SAFETY INSTRUCTIONS
INDEX ........................................................................................................................................... 3
1. DESCRIPTION
1.1 Characteristics
1.2 Expected use of the washer
2. OPERATION INSTRUCTIONS
2.1 Control panel
2.2 Loading the washing machine
2.3 Using the dispenser
2.4 Starting a program
2.5 Modifying a program in progress
2.6 Wash programs
2.7 Stop modes
2.8 Unbalance control
2.9 Delay option
3. ADVANCED USE MODE. ........................................................................................................ 4
3.1 Access to MODIFICATION mode .......................................................................................... 4
3.2. Modification of program contents. Pro menu ......................................................................... 4
3.2.1 Master program ........................................................................................................... 5
3.2.2 Default program contents. Non USA / CANADA application ....................................... 6
3.2.3 Default program contents. USA / CANADA application .............................................. 7
3.2.4 Default program contents. Great Britain application ..................................................... 8
3.2.5 Phases definition .......................................................................................................... 9
3.2.6 Definition of programmable functions and values for each phase ............................... 9
3.2.7 Modification of a program ........................................................................................... 10
3.3. Information menu. Info menu ................................................................................................. 14
3.4. Modification of operating parameters. Mod menu ............................................................... 14
3.4.1 Parameters modification ............................................................................................ 15
3.5. Modification of the access code. NCod menu ..................................................................... 16
3.6. Clock of the system. Hour Menu .......................................................................................... 17
3.6.1 To set the clock ........................................................................................................... 17
4. TROUBLESHOOTING
4.1 What to do when
4.2 System alarms
5. MAINTENANCE
5.1 Operations described
5.2 Cleaning the washer
5.3 Cleaning the door seal
5.4 Cleaning the electrovalve filters
5.5 Cleaning the dispenser
5.6 Cleaning the drain pump
5.7 Revising the safety mechanisms
5.8 General revision
6. SERVICE REMOVAL
6.1 Dismantling
NOTE
For the contents of SAFETY INSTRUCTIONS, chapters 1. DESCRIPTION, 2. OPERATING
INSTRUCTIONS, 4. TROUBLESHOOTING, 5. MAINTENANCE and 6. SERVICE REMOVAL, see
Operation Instructions LOGI CONTROL, supplied with the washer or request it to the manufacturer:
[e-mail], (USA/CANADA: [email protected]).

Cod. 429597
Rev. 01/0106
4
Advanced Mode
3. ADVANCED USE MODE.
There is an advanced use mode: the MOD mode. This mode includes five different menus through which,
each user can personalise the operation of the washing machine.
Menus for advanced use mode:
MENU PURPOSE
Pro Modification of the program contents
INFO Information menu
Mod Modification of operation parameters
Ncod Modification of the access code
HOUR Adjustment of the system time
3.1. Access to MODIFICATION mode
Connect the washer and open the door. The display shows door.
Hold MOD key until the display shows Cod.
Enter the access code to the menus pressing, without interruption, the sequence of eight keys of the code. In
basic configuration (when the machine is delivered) the access code to MODIFICATION mode is: 12341234.
Numerical correspondence of each key
KEY CORRESPONDENCE
MOD 1
V2
ACCEL 3
W4
If the sequence set is correct, report Pro will be showed in the display, corresponding to the first menu.
Keys Vand Wallow the selection of the precedent table menus. The menu selected is showed in the display
following its key word. To enter in it, press the MOD key when displaying it.
If wished to skip the MODIFICATION mode, press STOP and machine will return to programs execution
mode.
Disconnecting the electrical supply to the washing machine can also exit the MODIFICATION mode.
3.2. Modification of programs contents. Pro menú.
In its original configuration, the washing machine has eight wash programs with content adapted to a wide
range of usage. However, the content of each program can be modified to be adapted to the specific needs
of different situations.
The modifications will always be carried out starting from a MASTER PROGRAM that understands the
programmable parameters and the maximum and minimum values of certain options.
The master program is composed of nine phases. At the start of each phase, a parameter of the value PH-Y
/ Ph-N (execute YES phase / execute NO phase) will allow the user to determine if the accessed phase
should be executed or, on the contrary, be omitted.
Once the phase is defined as to be executed, proceed to the display and modification (if desired) of the
parameters or values of the phase.

Cod. 429597
Rev. 01/0106
5
Advanced Mode
3.2.1. Master program
EXECUTION LEVEL TEMP. DOSING ROTATION ROTATION
TIME COOL DOWN PAUSE EXTRACT EXTRACT TIME
PHASE Ph L C / F d r rt c rh E Et
1 Y / N 1…4 0 ... 40
32 ... 104 0 / 1 1...3 1...8 n.p. n.p. 1 n.p.
2 Y / N 1…4 0 ... 40
32 ... 104 0 / 1 1...3 1...8 n.p. n.p. 1 n.p.
3 Y / N 1…4 0 ... 40
32 ... 104 0 / 1 1...3 1...8 n.p. n.p. 1...3 n.p. 2...4
4 Y 1…4
0 ... 90
32 ... 194 2 1...3 1...20 0 / 1 n.p. 0...2 n.p. 2...3
5 Y / N 1…4 0 ... 40
32 ... 104 0 / 3 1...3 1...8 n.p. n.p. 1...3 n.p. 2...4
6 Y / N 1…4 n.p. n.p. 1...3 1...8 n.p. n.p. 1 n.p.
7 Y / N 1…4 n.p. n.p. 1...3 1...8 n.p. n.p. 1 n.p.
8 Y / N 1…4 n.p. n.p. 1...3 1...8 n.p. n.p. 1 n.p.
9 Y 1…4
0 ... 40
32 ... 104 0 / 4 1...3 1...8 n.p. 0 / 1 1...6 n.p. 2...9
Refer to section 3.2.5 for the definition of functions and programmable values of each phase.

Cod. 429597
Rev. 01/0106
6
Advanced Mode
3.2.2. Programs contents. General application.
PR -1. EXTRA HEAVY SOIL -WHITE 65 MIN PR -2. HEAVY SOIL -WHITE 59 MIN
Ph Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 Y 2 20 1 1 4 - - - - - - 1 - - - 1 Y 2 20 0 1 4 - - - - - - 1 - - -
2 Y 2 40 0 1 2 - - - - - - 1 - - - 2 N 2 0 0 1 2 - - - - - - 1 - - -
3 Y 2 60 1 1 6 - - - - - - 3 3 3 Y 2 30 1 1 6 - - - - - - 3 3
4 Y 1 80 2 1 12 0 - - - 2 2 4 Y 1 60 2 1 10 0 - - - 2 2
5 Y 2 40 3 1 6 - - - - - - 3 3 5 Y 2 40 3 1 6 - - - - - - 3 3
6 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 6 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
7 N 3 - - - - - - 1 2 - - - - - - 1 - - - 7 N 3 - - - - - - 1 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
9 Y 2 0 4 1 4 - - - 0 6 7 9 Y 2 0 4 1 4 - - - 0 6 7
PR -3. MEDIUM SOIL –WHITE 51 MIN PR -4. LIGHT SOIL –WHITE 37MIN
Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 N 2 30 0 1 4 - - - - - - 1 - - - 1 N 2 30 0 1 4 - - - - - - 1 - - -
2 N 2 0 0 1 2 - - - - - - 1 - - - 2 N 2 0 0 1 2 - - - - - - 1 - - -
3 Y 2 30 1 1 6 - - - - - - 3 3 3 N 2 30 1 1 6 - - - - - - 3 3
4 Y 1 50 2 1 8 0 - - - 2 2 4 Y 1 40 2 1 6 1 - - - 0 - - -
5 Y 2 30 3 1 6 - - - - - - 3 3 5 Y 2 30 3 1 6 - - - - - - 3 3
6 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 6 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
7 N 3 - - - - - - 1 2 - - - - - - 1 - - - 7 N 3 - - - - - - 1 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
9 Y 2 0 4 1 4 - - - 0 6 7 9 Y 2 0 4 1 4 - - - 0 6 7
PR -5. HEAVY SOIL –COLOR 51 MIN PR -6. MEDIUM SOIL –COLOR 40 MIN
Ph Ph L C d r rt cd rh E Et Et Ph Ph L C d r rt cd rh E Et
1 N 2 40 0 2 4 - - - - - - 1 - - - 1 N 2 30 0 2 4 - - - - - - 1 - - -
2 Y 2 0 0 2 4 - - - - - - 1 - - - 2 N 2 0 0 2 2 - - - - - - 1 - - -
3 Y 2 30 1 2 6 - - - - - - 3 3 3 Y 2 30 1 2 4 - - - - - - 2 2
4 Y 1 40 2 1 10 0 - - - 2 2 4 Y 1 40 2 1 8 0 - - - 2 2
5 Y 3 0 0 2 2 - - - - - - 3 3 5 Y 3 0 0 2 2 - - - - - - 3 3
6 N 3 - - - - - - 2 2 - - - - - - 1 - - - 6 N 3 - - - - - - 2 2 - - - - - - 1 - - -
7 N 3 - - - - - - 2 2 - - - - - - 1 - - - 7 N 3 - - - - - - 2 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 2 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 2 2 - - - - - - 1 - - -
9 Y 2 0 4 2 4 - - - 0 6 7 9 Y 2 0 4 2 4 - - - 0 6 7
PR -7. SYNTHETICS 30 MIN PR -8. WOOL AND DELICATES 32 MIN
Ph Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 N 3 30 0 2 4 - - - - - - 1 - - - 1 N 3 0 0 3 4 - - - - - - 1 - - -
2 N 3 0 0 2 2 - - - - - - 1 - - - 2 N 3 0 0 3 2 - - - - - - 1 - - -
3 N 2 40 1 2 4 - - - - - - 2 2 3 Y 3 0 1 3 4 - - - - - - 1 - - -
4 Y 1 40 2 2 6 0 - - - 2 2 4 Y 2 30 2 2 8 1 - - - 1 - - -
5 Y 3 0 0 2 2 - - - - - - 3 3 5 Y 3 0 0 3 2 - - - - - - 1 - - -
6 N 3 - - - - - - 2 2 - - - - - - 1 - - - 6 N 3 - - - - - - 3 2 - - - - - - 1 - - -
7 N 3 - - - - - - 2 2 - - - - - - 1 - - - 7 N 3 - - - - - - 3 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 2 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 3 2 - - - - - - 1 - - -
9 Y 2 0 4 2 4 - - - 0 6 6 9 Y 3 0 4 3 4 - - - 0 4 3

Cod. 429597
Rev. 01/0106
7
Advanced Mode
3.2.3. Programs contents. USA / CANADA application.
PR -1. EXTRA HEAVY SOIL -WHITE 27 MIN PR -2. HEAVY SOIL -WHITE 22 MIN
Ph Ph L F d r rt cd rh E Et Ph Ph L F dr rt cd rh E Et
1 N 2 104 1 1 4 - - - - - - 1 - - - 1 N 2 104 0 1 4 - - - - - - 1 - - -
2 N 2 32 0 1 2 - - - - - - 1 - - - 2 N 2 32 0 1 2 - - - - - - 1 - - -
3 N 2 104 1 1 6 - - - - - - 3 3 3 N 2 104 1 1 6 - - - - - - 3 3
4 Y 1 113 2 1 9 0 - - - 1 - - - 4 Y 1 104 2 1 6 0 - - - 1 - - -
5 Y 2 32 3 1 2 - - - - - - 3 2 5 Y 2 32 3 1 3 - - - - - - 3 2
6 N 3 - - - - - 1 1 - - - - - - 1 - - - 6 N 3 - - - - - 1 1 - - - - - - 1 - - -
7 N 3 - - - - - 1 1 - - - - - - 1 - - - 7 N 3 - - - - - 1 1 - - - - - - 1 - - -
8 Y 2 - - - - - 1 1 - - - - - - 1 - - - 8 N 3 - - - - - 1 1 - - - - - - 1 - - -
9 Y 2 32 4 1 2 - - - 0 6 5 9 Y 2 32 4 1 2 - - - 0 6 5
PR -3. MEDIUM SOIL –WHITE 22 MIN PR -4. LIGHT SOIL –WHITE 20 MIN
Ph Ph L F d r rt cd rh E Et Ph Ph L F d r rt cd rh E Et
1 N 2 86 0 1 4 - - - - - - 1 - - - 1 N 2 86 0 1 4 - - - - - - 1 - - -
2 N 2 32 0 1 2 - - - - - - 1 - - - 2 N 2 32 0 1 2 - - - - - - 1 - - -
3 N 2 104 1 1 6 - - - - - - 3 3 3 N 2 86 1 1 6 - - - - - - 3 3
4 Y 1 86 2 1 6 0 - - - 1 - - - 4 Y 1 68 2 1 4 1 - - - 1 - - -
5 Y 2 32 3 1 3 - - - - - - 3 2 5 Y 2 32 3 1 3 - - - - - - 3 2
6 N 3 - - - - - 1 1 - - - - - - 1 - - - 6 N 3 - - - - - 1 1 - - - - - - 1 - - -
7 N 3 - - - - - 1 1 - - - - - - 1 - - - 7 N 3 - - - - - 1 1 - - - - - - 1 - - -
8 N 3 - - - - - 1 1 - - - - - - 1 - - - 8 N 3 - - - - - 1 1 - - - - - - 1 - - -
9 Y 2 32 4 1 2 - - - 0 6 5 9 Y 2 32 4 1 2 - - - 0 6 5
PR - 5. HEAVY SOIL –COLOR 22 min PR- 6. MEDIUM SOIL –COLOR 21 min
Ph Ph L F d r rt cd rh E Et Et Ph Ph L F dr rt cd rh E Et
1 N 2 104 0 2 4 - - - - - - 1 - - - 1 N 2 86 0 2 4 - - - - - - 1 - - -
2 N 2 32 0 2 4 - - - - - - 1 - - - 2 N 2 32 0 2 2 - - - - - - 1 - - -
3 N 2 104 1 2 6 - - - - - - 3 3 3 N 2 104 1 2 4 - - - - - - 2 2
4 Y 1 104 2 1 8 0 - - - 1 - - - 4 Y 1 104 2 1 6 0 - - - 1 - - -
5 Y 2 32 0 2 1 - - - - - - 3 2 5 Y 2 32 0 2 1 - - - - - - 3 2
6 N 3 - - - - - 2 1 - - - - - - 1 - - - 6 N 3 - - - - - 2 1 - - - - - - 1 - - -
7 N 3 - - - - - 2 1 - - - - - - 1 - - - 7 N 3 - - - - - 2 1 - - - - - - 1 - - -
8 N 3 - - - - - 2 1 - - - - - - 1 - - - 8 N 3 - - - - - 2 1 - - - - - - 1 - - -
9 Y 2 32 4 2 2 - - - 0 6 5 9 Y 2 32 4 2 3 - - - 0 6 5
PR -7. SYNTHETICS 18 MIN PR -8. WOOL AND DELICATES 17 MIN
Ph Ph L F d r rt cd rh E Et Ph Ph L F d r rt cd rh E Et
1 N 3 32 0 2 4 - - - - - - 1 - - - 1 N 3 32 0 3 4 - - - - - - 1 - - -
2 N 3 32 0 2 2 - - - - - - 1 - - - 2 N 3 32 0 3 2 - - - - - - 1 - - -
3 N 2 32 1 2 4 - - - - - - 2 2 3 N 3 32 1 3 4 - - - - - - 1 - - -
4 Y 1 86 2 2 4 0 - - - 1 - - - 4 Y 2 68 2 2 6 1 - - - 1 - - -
5 Y 2 32 0 2 1 - - - - - - 3 2 5 Y 2 32 0 3 1 - - - - - - 1 - - -
6 N 3 - - - - - 2 1 - - - - - - 1 - - - 6 N 3 - - - - - 3 1 - - - - - - 1 - - -
7 N 3 - - - - - 2 1 - - - - - - 1 - - - 7 N 3 - - - - - 3 1 - - - - - - 1 - - -
8 N 3 - - - - - 2 1 - - - - - - 1 - - - 8 N 3 - - - - - 3 1 - - - - - - 1 - - -
9 Y 2 32 4 2 2 - - - 0 6 5 9 Y 2 32 4 3 2 - - - 0 4 3

Cod. 429597
Rev. 01/0106
8
Advanced Mode
3.2.4. Programs contents. Great Britain application.
PR -1. HEALTHCARE 49 MIN PR -2. HEAVY SOIL –WHITE 59 MIN
Ph Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 N 2 40 1 1 4 - - - - - - 1 - - - 1 Y 2 20 0 1 4 - - - - - - 1 - - -
2 Y 2 0 0 1 2 - - - - - - 1 - - - 2 N 2 0 0 1 2 - - - - - - 1 - - -
3 Y 2 0 1 1 2 - - - - - - 3 3 3 Y 2 30 1 1 6 - - - - - - 3 3
4 Y 1 65 2 1 12 0 - - - 2 2 4 Y 1 60 2 1 10 0 - - - 2 2
5 Y 2 40 3 1 6 - - - - - - 1 - - - 5 Y 2 40 3 1 6 - - - - - - 3 3
6 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 6 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
7 N 3 - - - - - - 1 2 - - - - - - 1 - - - 7 N 3 - - - - - - 1 2 - - - - - - 1 - - -
8 N 3 - - - - - - 1 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
9 Y 2 0 4 1 4 - - - 0 6 7 9 Y 2 0 4 1 4 - - - 0 6 7
PR -3. MEDIUM SOIL –WHITE 51 MIN PR -4. LIGHT SOIL –WHITE 37MIN
Ph Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 N 2 30 0 1 4 - - - - - - 1 - - - 1 N 2 30 0 1 4 - - - - - - 1 - - -
2 N 2 0 0 1 2 - - - - - - 1 - - - 2 N 2 0 0 1 2 - - - - - - 1 - - -
3 Y 2 30 1 1 6 - - - - - - 3 3 3 N 2 30 1 1 6 - - - - - - 3 3
4 Y 1 50 2 1 8 0 - - - 2 2 4 Y 1 40 2 1 6 1 - - - 0 - - -
5 Y 2 30 3 1 6 - - - - - - 3 3 5 Y 2 30 3 1 6 - - - - - - 3 3
6 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 6 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
7 N 3 - - - - - - 1 2 - - - - - - 1 - - - 7 N 3 - - - - - - 1 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
9 Y 2 0 4 1 4 - - - 0 6 7 9 Y 2 0 4 1 4 - - - 0 6 7
PR -5. HEAVY SOIL –COLOR 51 MIN PR -6. MEDIUM SOIL -COLOR 40 MIN
Ph Ph L C d r rt cd rh E Et Et Ph Ph L C d r rt cd rh E Et
1 N 2 40 0 2 4 - - - - - - 1 - - - 1 N 2 30 0 2 4 - - - - - - 1 - - -
2 Y 2 0 0 2 4 - - - - - - 1 - - - 2 N 2 0 0 2 2 - - - - - - 1 - - -
3 Y 2 30 1 2 6 - - - - - - 3 3 3 Y 2 30 1 2 4 - - - - - - 2 2
4 Y 1 40 2 1 10 0 - - - 2 2 4 Y 1 40 2 1 8 0 - - - 2 2
5 Y 3 0 0 2 2 - - - - - - 3 3 5 Y 3 0 0 2 2 - - - - - - 3 3
6 N 3 - - - - - - 2 2 - - - - - - 1 - - - 6 N 3 - - - - - - 2 2 - - - - - - 1 - - -
7 N 3 - - - - - - 2 2 - - - - - - 1 - - - 7 N 3 - - - - - - 2 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 2 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 2 2 - - - - - - 1 - - -
9 Y 2 0 4 2 4 - - - 0 6 7 9 Y 2 0 4 2 4 - - - 0 6 7
PR -7. SYNTHETICS 30 MIN PR -8. WOOL AND DELICATES 32 MIN
Ph Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 N 3 30 0 2 4 - - - - - - 1 - - - 1 N 3 0 0 3 4 - - - - - - 1 - - -
2 N 3 0 0 2 2 - - - - - - 1 - - - 2 N 3 0 0 3 2 - - - - - - 1 - - -
3 N 2 40 1 2 4 - - - - - - 2 2 3 Y 3 0 1 3 4 - - - - - - 1 - - -
4 Y 1 40 2 2 6 0 - - - 2 2 4 Y 2 30 2 2 8 1 - - - 1 - - -
5 Y 3 0 0 2 2 - - - - - - 3 3 5 Y 3 0 0 3 2 - - - - - - 1 - - -
6 N 3 - - - - - - 2 2 - - - - - - 1 - - - 6 N 3 - - - - - - 3 2 - - - - - - 1 - - -
7 N 3 - - - - - - 2 2 - - - - - - 1 - - - 7 N 3 - - - - - - 3 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 2 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 3 2 - - - - - - 1 - - -
9 Y 2 0 4 2 4 - - - 0 6 6 9 Y 3 0 4 3 4 - - - 0 4 3

Cod. 429597
Rev. 01/0106
9
Advanced Mode
3.2.5. Phases definition.
PHASES DEFINITION
1, 2, 3
4
5
6 - 8
9
Soaking and pre-washes. Optional execution phases. Water heating is permitted only in
machines with heating.
Washing. Obligatory execution phase. The mixing of hot and cold water and/or water heating is
permitted.
First Rinse. Optional execution phase. The mixing of hot and cold water is permitted and/or
water heating. Dosing of bleach included in some programs.
Second, third and fourth rinses. Optional execution phase.
Final Rinse. Obligatory execution phase. The mixing of hot and cold water is permitted and/or
water heating. Dosing of softener included and final extract.
3.2.6. Definition of programmable functions and values for each phase
PARAMETER CONCEPT OPTIONS
Ph-Y Phase able to be executed
Ph Phase execution Ph-N Phase unable to be executed
L-1 Low level
L-2 Medium level
L-3 High level
(Level not programmable in machines with pump drain)
L Bath level
L-4 Extra high level
(Level not programmable in machines with pump drain)
0 / 77 Programmable range in Centigrade degrees
32 / 777 Programmable range in Fahrenheit degrees
C / F Bath temperature n.p Not possible to program temperature in phase
d-0 Phase without dosing
d-1 Dosing of pre-wash detergent
d-2 Dosing of wash detergent
d-3 Dosing of bleach
d-4 Dosing of softener or neutraliser
d Dosing
n.p. Not possible to program dosing in phase
r-1 Heavy-duty rotation: 25 sec. ON - 5 sec. OFF
r-2 Normal rotation: 15 sec. ON - 15 sec. OFF
r Type of rotation r-3 Delicate rotation: 5 sec. ON - 25 sec. OFF
1...8 Programmable range in soak, pre-wash and rinse phases
rt Rotation time
(in minutes) 1...20 Programmable range in wash phase
0 Without progressive cool-down
1 Progressive cool-down in wash phase
c Progressive
cool down n.p Option not programmable
0 Without stop in final rinse
1 Stop in final rinse
rh Program stop in final
rinse n.p Option not programmable
0 Phase without drain
1 Drain + wash speed
2 Drain + positioning speed
3 Drain + low extract speed
4 Drain + medium extract speed
5 Drain + medium/high extract speed
EBath drain
6 Drain + high extract speed
Et Extract time 77 In minutes

Cod. 429597
Rev. 01/0106
10
Advanced Mode
3.2.7. Modification of a program
Access the MODIFICATION mode (section 3.1) The display will indicate Pro.
Press the MOD key to access the PROGRAMMING menu.
The display will indicate Pr-1. Ready to modify program 1. The V/ Wkeys are used to select another
program. Press the MOD key to access the modification of the displayed program.
The display will indicate Ph-1. Ready to modify phase 1. The V/ Wkeys are used to select another phase.
Press the MOD key to start the modification to the values of the selected phase.
When the number of the phase is displayed (start of phase), the STOP key is used to finalise the program
modification.
Once finalised the modification of a program, the display will show the Pr-7report. (modified program). A
pulsation on key STOP allows to access at the superior level of the menu. Two consecutive pulsations allow
exiting the MODIFICATION mode.
Activation of the phase
Allows programming the execution of the selected phase.
Once the desired phase to be modified has been selected, press the MOD key. The display will indicate
Ph-7.
OPTIONS MEANING
Ph-Y Availability of the phase to be executed
Ph-N Unavailability of the phase to be executed
The Vkey will modify the displayed option.
The MOD key validates the displayed selection and allows access to the following programmable function.
Bath level.
Allows the selection of bath level inside the washer.
OPTIONS MEANING
L-1 Low level
L-2 Medium level
L-3 High level
L-4 Extra high level
For safety, the options L-3 and L-4 are not programmable in machines with pump drain.
The V/ Wkeys will modify the displayed option.
The MOD key validates the displayed selection and allows access to the following programmable function.
Bath temperature
Allows modifying the water temperature in the phases in which this function is available. In other phases, it is
not possible to program the water temperature.
OPTIONS MEANING
C-00 ... C-40
F 32 ... F 104
Range of programmable temperature in soak, prewash and
rinses phases.
C- 77:Centigrade degrees
F777:Fahrenheit degrees
C-00 ... C-90
F 32 ... F 194
Range of programmable temperature in wash phase.
C- 77:Centigrade degrees
F777:Fahrenheit degrees
The V/ Wkeys will modify the displayed option.
The MOD key validates the displayed selection and allows access to the following programmable function.

Cod. 429597
Rev. 01/0106
11
Advanced Mode
Dosing.
Permits to activate or deactivate dosing that appear in the master table.
OPTIONS MEANING
d-0 Without dosing
d-1 External dosing of soak and pre-wash detergent
d-2 External dosing of wash detergent
d-3 Bleach dosing
d-4 Softener or neutraliser dosing
n.p. Not possible to program dosing in the phase
The first executed soak or pre-wash phase doses the deposited detergent in the pre-wash compartment of
the washer dispenser. In these phases water enters through this compartment.
The wash phase doses the product located at the wash compartment of the washer dispenser. In the wash
phase the water enters through this compartment.
Options d-1 and d-2 only control the external product dosing.
Options d-3 and d-4 control the entry of water into the corresponding compartment of the dispenser and the
external product dosing.
The Vkey will modify the displayed option.
The MOD key validates the displayed selection and allows access to the following programmable function.
Rotation
The mechanical action of the washing machine regarding the laundry is different according to the selected
rotation.
Time ON: drum in rotation
Time OFF: drum stopped.
OPTIONS MEANING
r-1 Heavy duty rotation
ON: 25 sec. OFF: 5 sec.
r-2 Normal rotation
ON: 15 sec. OFF: 15 sec.
r-3 Gentle rotation
ON: 5 sec. OFF: 25 sec.
The Vkey will modify the displayed option.
The MOD key validates the displayed selection and allows access to the following programmable function.
Rotation time
Rotation time programmed in the phase. It is valued in minutes.
This time is started once the programmed temperature and level are reached.
OPTIONS MEANING
1 ... 8 Programmable range in the soak, pre-wash and rinse phases
1 ... 20 Programmable range in the wash phase
The V/ Wkeys will modify the displayed option.
The MOD key validates the displayed selection and allows access to the following programmable function.
Progressive cool down
Progressive cool-down of the water is done by adding cold water until a temperature of 45ºC (113ºF) is
reached.
This function will appear only in the wash phase if the programmed temperature is over 50ºC (122ºF).

Cod. 429597
Rev. 01/0106
12
Advanced Mode
OPTIONS MEANING
c-0 Progressive cool-down deactivated
c-1 Progressive cool-down activated
The Vkey will modify the displayed option.
The MOD key validates the displayed selection and allows access to the following programmable function.
Crease guard stop
All the functions of the washing machine stop, maintaining the water inside, with a light rotation of the drum
at 15 minute intervals. This is only programmable in the final phase of the program.
This function is designed to avoid the laundry remaining for a long time inside the drum, once the final spin is
finished, thus avoiding the appearance of creases.
OPTIONS MEANING
rh-0 Crease guard stop OFF
rh-1 Crease guard stop ON
The Vkey will modify the displayed option.
The MOD key validates the displayed selection and allows access to the following programmable function.
Bath drain
The draining of the water from the washing machine is done through the activation of the drain system, either
by pump or by gravity at the same time the drum is rotating.
Option E-1 implies an unchangeable time value. The duration of options E-2 – E-6 is programmable within a
determined range.
OPTIONS MEANING
E-0 Phase without drain
E-1 Drain + wash speed
E-2 Drain + positioning speed
E-3 Drain + low extract speed
E-4 Drain + medium extract speed
E-5 Drain + medium/high extract speed
E-6 Drain + high extract speed
R.P.M. FOLLOWING MACHINE MODEL
OPTIONS MS-620
EM025 HS-6008 EH020 HS-6013 EH030 HS-6017 EH040
E-0 - - - - - - - - - - - - - - - -
E-1 50 50 49 45
E-2 99 101 100 99
E-3 306 580 400 350
E-4 402 690 600 550
E-5 503 780 800 750
E-6 600 970 1005 950
The V/ Wkeys will modify the displayed option.
The MOD key validates the displayed selection and allows access to the following programmable function.

Cod. 429597
Rev. 01/0106
13
Advanced Mode
Extract time
Extract time programmed in the phase. It is valued in minutes.
OPTIONS MEANING
n.p. Drain time E-1
2 ... 4 Programmable range in not final phase of the program
2 ... 9 Programmable range in final phase of the program
The V/ Wkeys will modify the displayed option.
The MOD key validates the displayed selection and ends the phase programming.
Display shows the following phase.
When finalising the programming of the last phase of the program, display shows Pr-7(modified program)

Cod. 429597
Rev. 01/0106
14
Advanced Mode
3.3. Information menu. INFO menu
PARAMETERS MEANING
LOGI
6666 Type of control
Washer’s model
EP 77 Version of program
Pr Number of cycles executed
SUD Number of times the anti-suds function has been activated
Access the MODIFICATION menu. Section 3.1. Display shows Pro.
Press Vkey. Display shows INFO.
Press the MOD key to sequentially access the listing of the different parameters and the values of the
corresponding counters.
Once the last option is listed, press the MOD key. Display shows INFO.
The V/ Wkeys allow the access to other menus.
To exit the MODIFICATION menu press the STOP key.
3.4. Modification of operating parameters. Mod menu.
The Mod menu allows the modification of the operation parameters of all the programs.
The modifications carried out from Mod menu affects the eight programs.
Summary table of the changeable parameters:
PARAMETER MODIFICATION OF OPTIONS CE USA
b-0 Without buzzer
b-1 Low buzzer
b-2 Normal buzzer ÍÍ
b Buzzer
b-3 Strong buzzer
C Temperature displayed in Centigrade degrees Í
C / F Temperature unit F Temperature displayed in Fahrenheit degrees Í
AC-0 Without acceleration permission
AC Program acceleration AC-1 With acceleration permission ÍÍ
SP-0 Without suds prevention ÍÍ
SP-1 First level of suds prevention
SP Levels of suds
prevention SP-2 Second level of suds prevention
tS-0 Wash temperature selection disabled.
tS Wash temperature
selection when
starting program tS-1 Wash temperature selection enabled. ÍÍ
ÍIndicates default option following configuration.

Cod. 429597
Rev. 01/0106
15
Advanced Mode
3.4.1. Parameters modification
Access the MODIFICATION mode. Section 3.1. Display shows Pro.
Press key Vtwice. In the display reports INFO, Mod are showed successively.
Press the MOD key to display the first parameter.
Buzzer
The door safety unlock can be advised by the sounding of a beep. The duration of this warning is
programmable.
OPTIONS MEANING
b-0 Buzzer OFF
b-1 Low buzzer: two beep
b-2 Normal buzzer: four beep
b-3 Strong buzzer: six beep
The key Vallows the modification of the option displayed.
The MOD key validates the selection on the display and permits the access to the following programmable
function.
Temperatura unit
The bath water temperature can be displayed in Centigrade or Fahrenheit degrees.
OPTIONS MEANING
C Temperature unit in Centigrade degrees
F Temperature unit in Fahrenheit degrees
The key Vallows the modification of the option displayed.
The MOD key validates the selection on the display and permits the access to the following programmable
function.
Program acceleration
Program acceleration can reduce the time of the programs accessing to functions or subsequent phases, or
reducing the times of rotation and spinning. There is also the possibility to increment the rotation times.
The option AC enables or disables the utilisation of the ACCEL (acceleration) key
OPTIONS MEANING
AC-0 Acceleration option disabled
AC-1 Acceleration option enabled
The key Vallows the modification of the option displayed.
The MOD key validates the selection on the display and permits the access to the following programmable
function.
Suds prevention program
Certain detergents commonly used in some countries produce large quantities of suds and can complicate
the proper functioning of the wash programs.
To mitigate this complication it is advisable to use the anti-suds program.
The anti-suds program consists of TWO levels of prevention. Each level of prevention involves a light
increment in the duration of the program and of the consumption of water and energy.
Once programmed, the prevention is activated automatically in the case that the washing machine detects
excessive suds within the interior of the drum.

Cod. 429597
Rev. 01/0106
16
Advanced Mode
OPTIONS MEANING
SP-0 Without suds prevention
SP-1 First level of suds prevention
SP-2 Second level of suds prevention
The key Vallows the modification of the option displayed.
The MOD key validates the selection on the display and permits the access to the following programmable
function.
Quick wash temperature selection
This option disables the possibility to modify the wash phase temperature for the following programme.
OPTIONS MEANING
tS-0 Wash temperature selection disabled.
tS-1 Wash temperature selection enabled.
The key Vallows the modification of the option displayed.
The MOD key validates the selection on the display. Display shows Mod.
The keys V/ Wallow the access to other menus.
To exit the MODIFICATION mode press the STOP key.
3.5. Modification of the access code to MODIFICATION mode. Ncod menu.
As it is described in section 3.1, the access to CONFIGURATION mode is restricted with an access code.
This code can be modified by the user if he wants to.
It must always contain a combination of EIGHT keys
Access code modification.
Access the MODIFICATION mode. Section 3.1. Display shows Pro.
Press the Vkey three times. INFO, Mod, Ncod reports will be showed in the display successively.
Press the MOD key to set a new code. All the information of the display goes out.
Enter a combination of eight keys using the four central keys in the control panel.
The key pushed is displayed in the display as follows:
KEY CORRESPONDENCE
MOD 1
V2
ACCEL 3
W4
At the end of the sequence the SURE report will be showed.
Confirm the new code with the ACCEL key.
If you don’t want to validate the code, push the STOP key.
Display will show Ncod.
The keys V/ Wallow the access to other menus.
To exit the MODIFICATION mode press the STOP key.
NOTE.
If you forget the modified code, call the Service department to restore the original code.

Cod. 429597
Rev. 01/0106
17
Advanced Mode
3.6. Clock of the system. Hour menu
The access to this menu is only possible if the option clock is available.
This menu allows the user to enquire and / or modify the hour in the system.
The clock must be at the real time for the proper operation of the starting time.
3.6.1 To set de clock
Access the MODIFICATION mode. Section 3.1. Display shows Pro.
Press the Vkey four times. INFO, Mod, Ncod, Hour reports will be showed in the display successively.
When displaying Hour push the MOD key. The SURE report will be displayed.
The control of the washing machine asks for the confirmation of the access command for the time
modification.
To exit the Hour menu, push STOP
Push ACCEL to access the modification of the clock time.
The hour of the system is showed in the display in the format: hh.mm (hour format: 24 hours).
The changeable parameters are showed flashing.
Push the ACCEL key to pass from the minute modification to the hour modification.
Change the selected value with the V/Wkeys.
Push the MOD key to validate the selection.
STOP allows leaving the menu without validating the modification.
After validating the time selection, Hour is showed in the display.
The V/Wkeys allow the access to other menus.
To exit the MODIFICATION mode press the STOP key. The washing machine can carry out the programs.