Gisteq RG-110 User manual

Quick Start Guide
Driver Installation
LED Indicator
© 2009 GiSTEQ Corp. All Rights Reserved.
1. Plug the device into the computer to start
installing the driver.
2. The Found New Hardware window will appear
as shown on left.
3. Select "Locate and install driver software
(recommended)".
5. When driver installation is finished, you will
see a message saying “Driver have been
successfully installed” along with the COM
port assigned to the device.
* The default baud rate is 4800 bps.
4. In the next window, you will be asked to put in
the driver CD. Put the CD into the computer
and click Next.
GiSTEQTM
LED OFF
LED ON
LED FLASHING
USB GPS receiver is off
USB GPS receiver is on and searching for signal
USB GPS receiver has received a fixed GPS signal