GivEnergy GIV-AIO-AC-13.5 User manual

ALL IN ONE + GIV-GATEWAY
INSTALLATION GUIDE
3.6kW | 6.0kW | 13.5kWh | UK V2.0 - 29/01/24
GIV-AIO-AC-13.5
GIV-AIO-AC-13.5-3.6
GIV-AIO-GW1

Ensure the packaging and product are free from any damage
Introduction
Installation Requirements
Installation of the GivEnergy All in One and Giv-Gateway must be carried out by a GivEnergy Approved
Installer and in accordance with the IEE Wiring Regulations.
Unit Information
The All in One contains a bidirectional inverter and a 13.5kWh lithium iron phosphate battery. Used with
our Giv-Gateway, the system can provide whole home backup when a power outage occurs. The system
can charge from the grid when prices are cheaper, and export stored generation when prices are at their
peak. The Giv-Gateway interface features a display for a PV inverter, EV charger, grid and home storage
battery.
Storing the All in One and Giv-Gateway
The unit must be stored in its original packaging at temperatures between -40ºC - 70ºC.
Do not stack more than 4 units on top of each other.
If any damaged or missing parts are found, please contact GivEnergy on 01377 252 874 or email
[e-mail] immediately. Returns must be provided in the original or equivalent packaging.
The Giv-Gateway’s cardboard packaging is recyclable.
When unpacking, please check the following:
Packaging Contents
All information contained in this booklet refers to the installation and maintenance of GivEnergy’s
All in One and Giv-Gateway. Please retain this manual for future reference.
GENERAL INFORMATION
Legal Disclaimer: This document is the property of GivEnergy, reproduction is prohibited.
There are no missing accessories from the packaging list
The model and specifi cation of the All in One and Giv-Gateway’s nameplate match the order specifi cations
SYSTEM DIAGRAM
Giv-Gateway
All in One
Load EV charger PV inverter
Grid

ALL IN ONE SPECIFICATIONS
Primarily working as an on grid system, the
All in One can deliver 7.2kW of peak power into the
home on top of any solar generation.
Complete with a substantial 13.5kWh useable
battery pack that stores excess generation.
Connect up to 6 systems in parallel, giving 80kWh
of useable storage (coming soon). Featuring
a modular design comprising 4 removable
battery packs, allowing for ease of handling and
installation.
A great addition to any smart home
ROBUST AND FLEXIBLE
Specifi cations Dimensions
1100H x 280D x 600W (mm)
Warranty
12 years
AC Input Rating
6000W
Weight
173.7 Kg
AC Output Rating
7.2kW / 32A peak
6.0kW / 26A continuous
Operating temperature
-10oC to 50oC
Depth of Discharge
100%
Connectivity
WiFi, LAN and 4G
Noise Emission (typical)
<30dB
Model number
GIV-AIO-AC-13.5
ALL IN ONE 3.6 SPECIFICATIONS
The might of the All in One, held in check. The AIO
3.6 is a G98 certifi ed version of the product limited
to 3.6kW on-grid. This means it can be installed
without prior permission from the DNO, or in
areas where there are grid limitations.
A great addition to any smart home
ROBUST AND FLEXIBLE
Specifi cations Dimensions
1100H x 280D x 600W (mm)
Warranty
12 years
AC Input Rating
6000W
Weight
173.7 Kg
AC Output Rating
3.6kW / 16A peak / continuous
power (on grid)
7.2kW / 32A peak power (off grid)
6kW / 26A continuous power (off grid)
Operating temperature
-10oC to 50oC
Depth of Discharge
100%
Connectivity
WiFi, LAN and 4G
Noise Emission (typical)
<30dB
Model number
GIV-AIO-AC-13.5-3.6

AF
Item Item Name
Power Flow IndicatorA
AC Supply Terminals
Wifi Antenna
DC Circuit breaker
On / Off Switch
Cable entry point
B
C
D
E
F
ALL IN ONE COMPONENTS
C
B
D
E
A
C E
B
D
Item Item Name Qty
All in One UnitA1
Bracket
Expansion Bolt
WiFi Antenna
Spirit Level
B
C
D
E
2
4
1
1
ALL IN ONE BOX CONTENTS

Do not install in direct sunlight or near water sources
Do not use the equipment if there are any deformities, such as bulging or leakages
Do not puncture the equipment
Do not throw the equipment or use forceful impact
Do not attempt to repair the equipment yourself (please call your Approved Installer)
INSTALLATION INSTRUCTIONS
The system must be installed under a canopy if installing externally
The feet of the All in One are designed to be above the frost-line at a minimum
of 50mm
The system must be installed in an easily accessible location, the status display must
be visible and not obstructed
Please ensure that the wall to be mounted on is suffi cient enough to hold the weight
of the All in One and Giv-Gateway
The system must be installed in a well ventilated area, the ambient temperature
should be below 40ºC to ensure optimal operation
The system must be installed vertically with connections always positioned at the
bottom, never install horizontally, and avoid tilting the unit
ALL IN ONE UNBOXING
Remove top cover from the wooden crate1.
Remove front cover of the All in One3.
Remove the All in One brackets and place
to one side
2.
Remove bottom waterproof cover of the
All in One
4.
Remove the battery packs, leave to one side5. Remove All in One case from wooden crate
(2 person lift)
6.
Remove the All in One brackets and place

Place the wall mounting bracket horizontally onto the wall and mark the position of the bracket holes.
Drill 4 holes at the marked positions to suit the fi xings.
1.
Fix the mounting bracket to the wall using the expansion bolts or other suitable fi xings.
Please note: the brackets are sided.
2.
ALL IN ONE STEP-BY-STEP INSTALLATION
Ensure the All in One and Giv-Gateway are always fi xed to the wall using the mounting bracket
Ensure all components are attached securely
Extra care and attention must be taken when installing and maintaining any GivEnergy equipment.
The system is capable of retaining a high voltage, even when disconnected.
SAFETY INSTRUCTIONS
All electrical installations must be carried out by a qualifi ed and registered Electrician and in
accordance with the IEE Wiring Regulations
During operation, the heat sink may become hot. Do not touch the heat sink at the sides, or the top
of the inverter when in operation
The system is designed to be connected to the grid; connecting your inverter to a generator or other
power source can result in damage to the inverter or external devices
All GivEnergy equipment must be installed by a GivEnergy Approved Installer
If any damaged or missing parts are found, please contact GivEnergy on 01377 252 874 or email
[e-mail] immediately. Returns must be provided in original or equivalent packaging
If you suspect something is wrong with the system, contact GivEnergy on 01377 252 874 or email
[e-mail]

There must be adequate clearance around the All in One to allow for heat dissipation. The diagram
below illustrates the space required around the system.
CLEARANCE AND MAINTENANCE
When maintaining and cleaning the All in One, the whole system must be powered down. Please refrain
from using cleaning products on the surface of the All in One.
To ensure your All in One operates optimally at all times, annual maintenance checks need to be carried
out. Check for visible damage or discolouration of the switch, and that the cables are intact. Please ensure
that the top of the All in One is not obstructed in any way.
Space Clearance
Maintenance
300mm
250mm
250mm
250mm
250mm
Re-insert the battery modules into the shelves of the All in One battery compartment. Secure the
battery modules using the fi xings provided. Re-attach waterproof cover.
Replace the front cover and secure with the screws.
4.
5.
Mount the All in One onto the mounting bracket. Adjust the height of the supporting feet to
ensure the unit is level and attach the securing screws to the brackets, ensuring the weight is on
the feet, not the brackets. Brackets are there for stability.
3.

Cable size requirements for the All in One are 6mm² minimum.
Both side and rear cable entry points are provided. If using rear entry point please ensure the cable is
installed prior to fi tting the All in One. The AC supply cable should enter through one of the waterproof
glands and pass through the cable entry chamber (labelled below) and connected into the AC supply
terminal block. The supply cable should be at least 6mm². Strip the outer insulation to 8mm in length of
bare copper and connect them to the terminal block.
ALL IN ONE AC UTILITY GRID CONNECTION
The recommended maximum cable length should not exceed 50m as the resistance of the cable will
consume inverter output power and reduce the inverter effi ciency.
Cable entry
chamber
Power and
comms
Earth
Neutral
Live
Item Item Name
ALL IN ONE CONNECTIONS OVERVIEW
Communication / network portsA
AC SupplyB
B
A
WiFi
All in One communication / network ports
LAN
USB (Dongle) Mode
Giv-Gateway in
Giv-Gateway out
Parallel in
Parallel out
LAN
USB
Dip
switch
WiFi
reset
LC Meter LM

Protection Class
IP65
Max. AC Current
100A
GIV-GATEWAY SPECIFICATIONS
By purchasing the additional Giv-Gateway, the
All in One can provide whole house backup in the
event of a grid failure.
The Giv-Gateway provides seamless switching
between grid and battery ensuring that your
property is always powered. The Giv-Gateway
also facilitates a connection point for your solar
PV system by allowing it to continue to generate
energy even without a grid supply.
A great companion to the AIO
WHOLE HOME BACKUP
Specifi cations Dimensions
410H x 190D x 370W (mm)
Warranty
12 years
Nominal AC Power
18.4 kW
Weight
12.75 K g
Rated Grid Frequency
50/60±5Hz
ALL IN ONE COMMUNICATION WIRES CONNECTION
To install a single All in One, connect communication wire to the socket D in the wiring compartment
of the All in One.
Please note: The communication cable must be terminated with a
RJ45 plug at either end to connect the All in One to the Giv-Gateway.
Ensure the wiring confi guration into the RJ45 is the same both ends, a
cross-over cable will not work. A standard Ethernet Cat5/6 cable will
suffi ce here wired to T-568B standard if doing locally.
Single All in One installation

ISOLATING THE MAIN SUPPLY TO THE PROPERTY
Before installing the Giv-Gateway, make sure that the whole house is isolated from the main supply.
Once isolated, please test to ensure that no voltage is present to the property before disconnecting the
main supply cable from the consumer unit. The Giv-Gateway should be installed between the customer’s
supply meter and the consumer unit.
A
C E
F
B
D
G
Item Item Name Qty
Giv-GatewayA1
Bracket
Mounting screw
Wall plug
Antenna
Key
M6 x 12 Bracket Screw
B
C
D
E
F
G
1
2
2
1
1
4
GIV-GATEWAY BOX CONTENTS