Glacier bay KAGAN 21-K153KCP-GB User manual

THANK YOU
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this faucet. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Glacier Bay!
USE AND CARE GUIDE
KAGAN PULL-DOWN KITCHEN FAUCET WITH SOAP DISPENSER
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
Item #
#
#
1008088894
1008089084
324041354
Model 21-K153KCP-GB
21-K153KSS-GB
21-K153KMB-GB

2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
Pre-Installation.....................................3
Installation ........................................5
Care & Cleaning ....................................8
Troubleshooting ....................................9
Replacement Parts .................................10
Safety Information
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
□Cover the sink drain to avoid losing parts.
□When making water line connections, HAND TIGHTEN. DO NOT
OVERTIGHTEN. Do not use PTFE pipe tape, plumber’s putty, pipe
dope or any other type of sealing compound on water inlet or
threads. Additional compound is unnecessary. A watertight
seal between the thread inlet and supply tube is achieved by
compression.
WARNING: Protect your eyes with safety glasses when
cutting or soldering water supply lines.
CAUTION: If you solder the joints during installation of
the faucet, the seats, cartridges, and washers must be
removed before using a ame or the warranty will be voided
on these parts.
Warranty
WHAT IS COVERED
The distributor warrants to the original purchaser this product to be free from defects in material and workmanship under normal use
in residential applications. At its option, the Company will provide repair parts or replace defective product when the product is used
in accordance with the manufacturer’s specications. The distributor provides a limited 5-year warranty on the nish of this product
to the original purchaser. At its option, the distributor will provide repair parts or replace defective product when the product is used in
accordance with the manufacturer’s specications. Use of mild abrasive, abrasive or chemical cleaners may damage the nish of the
product. We recommend cleaning your faucet with a soft cloth, moistened with water. Damage resulting from the use of abrasive or
chemical cleaners SHALL VOID THIS WARRANTY.
WHAT IS NOT COVERED
This warranty is not applicable to any products or parts of products where damage is caused by use of nongenuine parts; is due to
installation error, product misuse, negligence or faulty maintenance; or where the product is not installed according to local building
codes. This warranty excludes labor charges or damage incurred during installation, repair or replacement, and any indirect, incidental
or consequential damages, losses, injury or costs of any nature. This warranty is in lieu of and excludes all other warranties, conditions
and guarantees, whether expressed or implied, including without restriction those of merchantability or tness of use. Liability under this
warranty will not exceed the purchase price for the product claimed to be defective by the original consumer purchaser. Some states or
provinces do not allow the exclusion or limitation of consequential damages so the above limitations or exclusions may not apply. This
warranty gives you specic legal rights and you may also have other rights which vary from state to state, or province to province.
Contact the Customer Service Team at 1-855-HD-GLACIER or visit www.HOMEDEPOT.COM/GLACIERBAY.

3 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Pre-Installation
SPECIFICATIONS
TOOLS REQUIRED
Adjustable
wrench Safety goggles Silicone sealant
Allen wrench Channel-lock
pliers
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA FastMountTM 1
BB Metal washer 1
CC Rubber washer 1
AA BB CC
Maximum ow rate: 1.8 GPM (6.81 LPM) at 60 PSI Ceramic cartridge
ASME A112.18.1/CSA B125 NSF/ANSI/CAN 61: Q ≤ 1 Manufactured to include no more than 0.25% weighted
average lead content on wetted surfaces
Stainless steel, chrome, and matte black nishes

4
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A Faucet body 1
B Deck plate 1
C Gasket 1
D Water supply lines (preassembled on Faucet
body (A))
2
E
Pull-down spray hose (preassembled on Faucet
body (A))
1
F Quick-connector
(preassembled on Faucet body
(A))
1
G Weight 1
Part Description Quantity
H
Spray head (preassembled on Faucet body (A)) 1
I Soap dispenser 1
JSoap bottle (preassembled on Soap
dispenser (I)) 1
KMounting nut (preassembled on Soap
dispenser (I)) 1
LMetal washer (preassembled on Soap
dispenser (I)) 1
MRubber washer (preassembled on Soap
dispenser (I)) 1
A
I
K
F
L
M
B
C
G
D
E
J
E
H

5 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation
1 Removing the old faucet
□Shut off the water at the supply valves under the sink or at
the main water supply.
□Disconnect the supply lines.
□Remove the existing faucet from the sink.
□Clean and dry the surface area where the new faucet will
be mounted.
2 Installing without the optional
deck plate
□To install the faucet body (A) with the optional deck plate
(B), skip to Step 3.
□Carefully insert the water supply lines (D), spray hose (E)
and quick-connector (F) on the faucet body (A) through the
mounting hole in the sink.
□Skip to Step 4.
A
E
D
F

6
Installation
3 Installing with the optional deck plate
□Apply a thin bead of silicone to the underside of the gasket (C).
□Place the gasket (C) and deck plate (B) over the mounting
holes in the sink, aligning the center holes in the gasket
(C) and deck plate (B) with the center mounting hole in the
sink.
□Carefully insert the water supply lines (D), spray hose (E)
and quick-connector (F) on the faucet body (A) through the
hole in the deck plate (B) and the mounting hole in the sink
until the faucet sits on top of the deck plate (B).
4 Securing the faucet
□From underneath the sink, secure the faucet body (A) to the
sink by sliding the rubber washer (CC), metal washer (BB),
and FastMountTM (AA) over the water supply lines (D), spray
hose (E) and quick-connector (F), and onto the shank on
the faucet body (A).
□Push the FastMountTM (AA) upwards until it is pressed
rmly against the underside of the sink and turn to tighten.
Do not overtighten.
NOTE: It is helpful to have a second person hold the faucet
in place while tightening the FastMountTM.
5 Adding the weight to the spray hose
□Loosen the cover on the weight (G) and slide it onto the
spray hose (E) until it is positioned at the location marked
“weight here”.
□Hand tighten the cover on the weight (G) by turning it in a
clockwise direction.
6 Attaching the spray hose
□The quick-connector (F) is preassembled onto the outlet hose.
□Attach the quick-connector (F) by pushing it onto the end of
the spray hose (E).
NOTE: If it is necessary to disconnect the spray hose (E)
from the faucet, squeeze the tabs on the quick-connector
(F) and pull down to disconnect.
A
BC
E
D
F
AA
D
F
E
CC
BB
A
G
E
1
2
F
E
E
(continued)

7 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
7 Installing the soap dispenser
□To install the optional soap dispenser (I), unscrew the top of
the soap dispenser (I) from the plastic soap bottle (J) and
remove the mounting nut (K), metal washer (L), and rubber
washer (M).
□From above the sink, insert the soap dispenser (I) into the
fourth hole opening in the sink.
□From underneath the sink, place the rubber washer (M)
and metal washer (L) onto the shank of the soap dispenser
(I) and then thread the mounting nut (K) onto the shank to
secure the soap dispenser (I) to the sink.
8 Connecting the supply lines
□Attach the end of the hot water (red stripe) and cold water
(blue stripe) water supply lines (D) coming from the faucet
body (A) to the hot and cold water shut-off valves and
tighten with a wrench. Do not overtighten.
CAUTION: Ensure the supply lines do not kink, twist or
bend during installation. Do not use if there are visible signs
of damage.
I
M
L
K
J
RED LINE
HOT
SHUT-OFF
VALVES
D
COLD
BLUE LINE

8
Installation (continued)
9 Checking for leaks
□Once the installation is complete, remove the spray head
(H) from the spray hose (E) to ush the water lines.
□Turn on the water supply and allow both hot and cold water
to run for at least one minute to ush away debris that
could cause damage to internal parts.
□While the water is running, check for leaks. If a leak
occurs, gently tighten the nut on the connection that is
leaking.
□Turn off the water and screw the spray head (H) back onto
the spray hose (E) of the faucet body (A).
A
H
E
E
Care and Cleaning
□Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the nish and void
your warranty.

9 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Troubleshooting
Problem Possible cause Solution
Water does not completely shut off. Ceramic cartridge discs are worn or
have debris trapped inside.
□Shut off the water supply.
□Move the handle to the OFF position. Unscrew the
handle screw and remove the handle.
□Remove the bonnet. Lift out the ceramic cartridge.
□Position the new ceramic cartridge into the faucet
body.
□Tightly screw the bonnet into the faucet body.
□Reinstall the handle.
Faucet leaks around aerator. The aerator is incorrectly tted, dirty,
or small parts inside the aerator are
improperly installed.
□Remove the aerator from the spout on the faucet
body. Inspect the black rubber gasket inside the aera-
tor. The rubber gasket should be at.
□Reinstall the aerator on the spout.
Faucet has an improper water
pattern.
The aerator is dirty or small parts inside
the aerator are improperly installed.
□Remove the aerator from the spout on the faucet
body.
□Gently ush the small parts inside the aerator to clear
away any debris.
□Reinstall the aerator on the spout.
No water pressure or low water
pressure after a longer period of
use.
The hose is blocked. □Remove the spray head by unscrewing it from the
hose assembly in a counterclockwise direction.
□Hold the end of the hose assembly down into the sink
and turn the faucet on to the warm position where
it mixes the hot and cold water. If the water ow is
still slow or completely blocked, please call customer
service.
Debris is trapped inside the supply line
connectors.
□Shut off the water supply valves.
□Disconnect the water supply lines and clean away
any debris.
□Reattach the water supply lines to the water shut-off
valves and tighten with a wrench. Do not overtighten.
□Turn on the water supply valves.
The mounting nut will not tighten
on the faucet shank.
The quick-install mounting nut was not
pushed upward over the faucet shank
before rotating.
□Push the quick-install mounting nut upwards over
the faucet shank until it is pressed rmly against the
underside of the sink and turn to tighten.
If a faucet installation doesn’t deliver water properly or leaks, nding the cause and xing it can be easy.

10
Replacement Parts
Part Description Part No.
21-K153KCP-GB 21-K153KSS-GB 21-K153KMB-GB
1 Spray head RP 90112CP RP 90112SS RP 90112MB
2 Sleeve RP 90113 RP 90113 RP 90113
3 Ceramic cartridge RP 03001 RP 03001 RP 03001
4 Cartridge retaining nut RP 01656 RP 01656 RP 01656
5 Cartridge cap nut RP 01657CH RP 01657SS RP 01657MB
6 Handle RP 90114CP RP 90114SS RP 90114MB
7 Plug RP 90115 RP 90115 RP 90115
8 Screw RP 01665 RP 01665 RP 01665
9 Rubber washer RP 90116 RP 90116 RP 90116
10 FastMount™ and metal washer RP 90059 RP 90059 RP 90059
11 Soap dispenser assembly RP 90119CP RP 90119SS RP 90119MB
12 Deck plate RP 90120CP RP 90120SS RP 90120MB
13 Gasket RP 90121 RP 90121 RP 90121
14 Quick-connector RP 01494 RP 01494 RP 01494
15 Weight RP 01661 RP 01661 RP 01661
12
13
14
10 11
9
8
6
5
4
3
7
1
2
15