Glancetron K700 User manual

All-In-One POS Terminal
USER’s GUIDE
Rev.A
Glancetron K700
www.glancetron.com

Copyright
Copyright 2012 Publishing. All Rights Reserved.
This manual, software and rmware described in it are copyrighted by their respective owners
and protected under the laws of the Universal Copyright Convention. You may not reproduce,
transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, biological, molecular, manual, or
otherwise, any part of this publication without the express written permission of the publisher.
All products and trade names described within are mentioned for identication purpose only.
No afliation with or endorsement of the manufacturer is made or implied. Product names and
brands appearing in this manual are registered trademarks of their respective companies.
The information published herein has been checked for accuracy as of publishing time. No repre-
sentation or warranties regarding the tness of this document for any use are made or implied by
the publisher. We reserve the right to revise this document or make changes in the specications
of the product described therein at any time without notice and without obligation to notify any
person of such revision or change.

Safety Instructions
1. Read these instructions carefully. Keep these instructions for future reference.
2. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed
detergent for cleaning. Use moisture sheet or cloth for cleaning.
3. Please keep this equipment from humidity.
4. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
5. Make sure power cord such a way that people can not step on it. Do not place anything over
the power cord.
6. All cautions and warnings on the equipment should be noted.
7. If the equipment is not used for long time, disconnect the equipment from main to avoid be
ing damaged by transient over voltage.
8. Never pour any liquid into opening, this could cause re or electrical shock.
9. If one of the following situations arises, get the equipment checked by a service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well or you can not get it work according to user manual.
e. The equipment has dropped and damaged.
10. Do not leave this equipment in an environment unconditioned, storage temperature below
-20°C or above 60°C, it may damage the equipment.
11. Unplug the power cord when doing any service or adding optional kits.
Lithium Battery Caution:
Danger of explosion can happen if the battery is incorrectly replaced. Replace only the original
or equivalent type recommended by the manufacture. Dispose used batteries according to the
manufacture’s instructions.
Do not remove the cover, and ensure no user serviceable components are inside. Take the unit
to the service center for service and repair.

CE Notice
This device complies with the requirements of the CE directive.
WEEE Notice
This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste
electrical and electronic equipment (WEEE). The Directive determines the framework for the
return and recycling of used appliances as applicable throughout the European Union. This label
is applied to various products to indicate that the product is not to be thrown away, but rather
reclaimed upon end of life per this Directive.

The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be reproduced,translated to another language
or stored in a retrieval system, or transmitted by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission. Windows is a registered
trademark of Microsoft, Inc. Other brand or product names are trademarks of their respective hold-
ers.
The test results show that this device meets the FCC rules. Those limits are set to protect
residential areas from the devices with harmful emission. This device will produce, use and
radiate radio frequency energy. In addition, failure to follow the user’s manual to install or use
this device might produce harmful interference with radio communication. Not withstanding the
foregoing, it does not guarantee that this type of harmful interference does not occur in some
special installations. The interference caused by this device to the reception of radio or television
signals may be veried by turning it on and off. Any changes or modications to this TFT LCD
would void the user’s authority to operate this device.

1
Usage Notice
! Warning -
To prevent the risk of  re or shock hazards, do not expose
this product to rain or moisture.
! Warning -
Please do not open or disassemble the product as this may
cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
• Turn off the product before cleaning.
• Touch screen surface may be cleaned using a soft clean cloth moistened with
mild window glass commercial cleaners or 50/50 mixture of water and
isopropyl alcohol.
• Use a soft cloth moistened with mild detergent to clean the display housing.
• Use only high quality and safety approved DC adapter.
Don’t:
• Do not touch the LCD display screen surface with sharp or hard objects.
• Do not use abrasive cleaners, waxes or solvents for your cleaning.
• Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic  eld.
- In direct sunlight.

Table of Contents
Copyright . ..........................................................................................................................
Safety Instructions....................................................................................................................
CE /WEEE Notice.....................................................................................................................
Usage Notice ..........................................................................................................................
Table of Contents.................................................................................................................... 1
Introduction ........................................................................................................................ 2
1.Packing List……………………………………………… ...................................................... 3
1-1 Standard Accessories……………………………………….. ......................................... 3
1-2 Optional Accessories………………………………………... ......................................... 3
2. System View……………………………...………. …… ....................................................... 4
2-1 Rear View……………………………………………………............................................ 4
2-2 Specication………………………………………………….. ......................................... 5
2-3 Internal Layout……………………………………………….. ......................................... 6
3. Pin Denition……………………………………………... .................................................... 7
4. Rear I/O Interface…………………..…………………….................................................... 12
5. System Assembly & Disassembly…………………… ................................................... 13
5-1 HDD………………………………………………………….... ....................................... 14
5-2 RAM…………………………………………………………... ........................................ 14
5-3 CFAST………………………………………………………........................................... 15
5-4 MSR…………………………………………………………... ........................................ 15
5-5 Internal VFD………………………………………………….. ....................................... 16
6. Device Driver Installation……………………………… ................................................... 17
6-1 Resistive Type Touch Panel …………………....………….. ....................................... 17
6-2 MagStripe Card Reader Conguration Utility…………... .......................................... 23
6-3 Fingerprint Reader…………………………………………. ......................................... 29
6-4 RFID...………………………………………………………... ........................................ 38
6-5 Internal VFD…………………………………………………. ........................................ 47
6-6 i-Button Reader Conguration Utility…………………..….......................................... 51
6-7 Installation and Testing of Smart Card Reader…………… ....................................... 54
7. BIOS/Utility Setup………………………………………..................................................... 59
7-1 Advanced…………………………………………………….. ........................................ 59
7-1-1 ACPI Conguration………………………………… .................................................. 60
7-1-2 S5 RTC Wake Settings……………………………. .................................................. 61
7-1-3 CPU Conguration…………………………………. .................................................. 62
7-1-4 IDE Conguration…………………………………..................................................... 63
7-1-5 IT8783F Super IO Conguration…………………. .................................................. 64
7-1-6 Parallel Port Conguration………………………….................................................. 66
7-2 Chipset………………………………………………… ......................................... …….67
7-2-1 Southbridge Conguration………………………… ............................................... 68
7-3 Boot…………………………………………………………… ........................................ 69
7-4 Security………………………………………………………. ........................................ 70
7-5 Save & Exit…………………………………………………… ....................................... 71
8. LCD Surface Cleaning………………………………….. ................................................... 72
1

2
Introduction
About Glancetron K700
Features include:
• A choice of stylish apple white or elegant charcoal grey are available to
compliment the decor of the working environment.
• Intel Atom D2550 1.86GHz dual core CPU with embedded options available
• Supports optical multi-touch display activated by a nger or gloved hand
• Fanless design for long life span
• Scratch-proof with 7H degree hardness surface (optical touch screen)
• IP64 water & dust-proof front panel protection
• Versatile mounting solution (panel mount) to t your decor
• Robust polymer housing design provides excellent impact resistance and
facilitates a modern appearance.
• Easy to access storage for installation and maintenance
• Optional built-in i-Button and MIFARE RFID reader
• Optional peripherals including MSR, VFD and ngerprint reader
• Optional built-in 2D barcode reader
Display
• 5-wire resistive touch
• 15-inch TFT Active Matrix Display
• Max. resolution: 1024 x 768
• Driver: Linux/ Windows CE/ Windows XP/ Windows Embedded Standard/ Windows 7/
Windows Embedded POSReady 7

3
System (with stand)
1| 73
Packing List
1
1-1 Standard Accessories
a.
b.
c.
d.
e.
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. M3 Screw x2
1-2 Optional Accessories
a.
b.
c.
1. Single MSR
2. 3 IN 1 MSR
3. Screw x2
1| 73
Packing List
1
1-1 Standard Accessories
a.
b.
c.
d.
e.
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. M3 Screw x2
1-2 Optional Accessories
a.
b.
c.
1. Single MSR
2. 3 IN 1 MSR
3. Screw x2
1| 73
Packing List
1
1-1 Standard Accessories
a.
b.
c.
d.
e.
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. M3 Screw x2
1-2 Optional Accessories
a.
b.
c.
1. Single MSR
2. 3 IN 1 MSR
3. Screw x2
1| 73
Packing List
1
1-1 Standard Accessories
a.
b.
c.
d.
e.
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. M3 Screw x2
1-2 Optional Accessories
a.
b.
c.
1. Single MSR
2. 3 IN 1 MSR
3. Screw x2
1| 73
Packing List
1
1-1 Standard Accessories
a.
b.
c.
d.
e.
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. M3 Screw x2
1-2 Optional Accessories
a.
b.
c.
1. Single MSR
2. 3 IN 1 MSR
3. Screw x2
1| 73
Packing List
1
1-1 Standard Accessories
a.
b.
c.
d.
e.
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. M3 Screw x2
1-2 Optional Accessories
a.
b.
c.
1. Single MSR
2. 3 IN 1 MSR
3. Screw x2
1| 73
Packing List
1
1-1 Standard Accessories
a.
b.
c.
d.
e.
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. M3 Screw x2
1-2 Optional Accessories
a.
b.
c.
1. Single MSR
2. 3 IN 1 MSR
3. Screw x2
1| 73
Packing List
1
1-1 Standard Accessories
a.
b.
c.
d.
e.
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. M3 Screw x2
1-2 Optional Accessories
a.
b.
c.
1. Single MSR
2. 3 IN 1 MSR
3. Screw x2
Power Adapter Power Cord
Driver Bank M3 Screw x2
1-2 Optional Accessories (Field installable)
1-1 Standard Accessories
Single MSR 3 IN 1 MSR Screw x2
1. Packing List

4
2 | 73
System View
2
2-1 Rear View
Item
1. Power Switch
2. 19V DC-in lock connector
3. VGA
4. USB x4
5. RJ45(LAN)
6. RJ11 for cash drawer
7. PS/2
8. RJ45(COM3 for External
VFD)
9. Mic-in
10. Line-out
11. LPT(Option)
12. PS/2 MSR Switch
Gear(Option)
13. COM2
14. COM1
15. MSR(Option)
16. iButton(Option)
17. 1D/2D Barcode
Scanner(Option)
18. RFID(Option)
19. LCM/VFD(Option)
20. HDD / CFast
21. VESA Mount
:Please make sure 19V DC plug
in the right direction before
plugging in DC jack.
1
2
3
4
5
6
7
8
9
10
11
13
14
12
15
16
17
18
19
20
21
2 | 73
System View
2
2-1 Rear View
Item
1. Power Switch
2. 19V DC-in lock connector
3. VGA
4. USB x4
5. RJ45(LAN)
6. RJ11 for cash drawer
7. PS/2
8. RJ45(COM3 for External
VFD)
9. Mic-in
10. Line-out
11. LPT(Option)
12. PS/2 MSR Switch
Gear(Option)
13. COM2
14. COM1
15. MSR(Option)
16. iButton(Option)
17. 1D/2D Barcode
Scanner(Option)
18. RFID(Option)
19. LCM/VFD(Option)
20. HDD / CFast
21. VESA Mount
:Please make sure 19V DC plug
in the right direction before
plugging in DC jack.
1
2
3
4
5
6
7
8
9
10
11
13
14
12
15
16
17
18
19
20
21
2. System View
2-1 Rear View
Item
1. Power Switch
2. 19V DC-in lock connector
3. VGA
4. USB x4
5. RJ45(LAN)
6. RJ11 for cash drawer
7. PS/2
8. RJ45(COM3 for External VFD)
9. Mic-in
10. Line-out
11. LPT(Option)
12. PS/2 MSR Switch Gear(Option)
13. COM2
14. COM1
15. MSR(Option)
16. iButton(Option)
17. 1D/2D Barcode Scanner(Option)
18. RFID(Option)
19. LCM/VFD(Option)
20. HDD / CFast
21. VESA Mount
■ Please make sure 19V DC plug
in the right direction before
plugging in DC jack.

5
3 | 73
System View
2
2-2 Specification
Processor Intel Atom D2550 1.86GHZ
Chipsets: North Bridge/South Bridge Intel NM10
Memory SO-DIMM socket supports DDR3 up to 4GB
Audio Line-out/Mic-in
Network RJ45 10/100/1000 Base-T
USB 4*USB 2.0
Storage CFast card / 2.5” SATA HDD / SSD
BIOS AMI UEFI BIOS Support
Power DC 19V 90/65W Adaptor
Thermal Solution Fan-less
Dimension 37.54(W) x 37.23(H) x 26.89 (D) cm
Operating Temperature 0°C ~ 40°C
Storage Temperature -20°C ~ 60°C
Storage Humidity -20% ~ 80%, non-condensing
Display
LCD Panel Size 15-inch TFT Active Matrix Display
Resolution 1024*768 Pixels
Backlight LED CCFL
Brightness 400 cd/m2 250 cd/m2
Touch Panel 5-Wire Analog Resistive Type
Note:
6Intel™ Cedarview CPU does not support 64-bit OS, therefore 64-bit Microsoft Windows®
Embedded POSReady 7 and 64-bit Microsoft Windows® 7 are not supported on PT8000.
6Current Intel™ XP Pro / POSReady 2009 graphics driver for Cedarview platform does not
support dual display.
6Please avoid excessive shock during HDD operating.
Note:
• Intel™ Cedarview CPU does not support 64-bit OS, therefore 64-bit Microsoft Windows®
Embedded POSReady 7 and 64-bit Microsoft Windows® 7 are not supported on K700.
• Current Intel™ XP Pro / POSReady 2009 graphics driver for Cedarview platform does not
support dual display.
• Please avoid excessive shock during HDD operating.
2-2 Specication
2. System View
CCFL
250 cd/m2

6
2. System View
4 | 73
System View
2
2-3 Internal Layout
Backside
Front Side
2-3 Internal Layout

7
5 | 73
Pin Definition
3
1. Power Switch (CN1)
Power switch (CN1)
Pin Signal
1 PWRBTN_N
2 GND
2. Internal connector fo USB6
Pin Signal
1 5V
2 D-
3 D+
4 GND
3. VFD (COM4)
Pin Signal Pin Signal
1 5V 6 CTS
2 DSR 7 TXD
3 Ground 8 RXD
4 DTR 9 Ground
5 RTS 10 12V
4. Internal connector for 3 in 1 module (USB 1)
Pin Signal Pin Signal Pin Signal
1 5V 5 HUB_P1_DP 9 HUB_P3_DP
2 5V 6 HUB_P2_DN 10 GND
3 GND 7 HUB_P2_DP 11 3.3V
4 HUB_P1_DN 8 HUB_P3_DN 12 3.3V
5. PS/2 MSR (CN9)
Pin Signal Pin Signal Pin Signal
1 5V 4 GND 7 K/B Clock
2 K/B Data 5 NC 8 MSR K/B Clock
3 MSR K/B Data 6 GND
:USB 6 is connected to one hub, and it
is for iButton, RFID and barcode
scanner.
■ USB 6 is connected to one hub, and it is
for iButton, RFID and barcode scanner.
3. Pin Denition

8
6 | 73
Pin Definition
3
Jumper setting JP2
Pin Signal Pin Signal Pin Signal
1 K/B Data 3 MSR K/B Data 5 NC
2 K/B Clock 4 MSR K/B Clock 6 NC
6. CFast connector
Pin Signal Pin Signal Pin Signal Pin Signal
1 GND 7 GND 13 NC 19 NC
2 TX 8 CDI 14 GND 20 V3.3
3 TX# 9 GND 15 NC 21 V3.3
4 GND 10 NC 16 NC 22 GND
5 RX# 11 NC 17 NC 23 GND
6 RX 12 NC 18 NC 24 CDO
7. 22Pin SATA connector
Pin Signal Pin Signal Pin Signal Pin Signal
1 GND 7 GND 13 GND 19 GND
2 TX 8 V3.3 14 V5 20 V12
3 TX# 9 V3.3 15 V5 21 V12
4 GND 10 V3.3 16 V5 22 V12
5 RX# 11 GND 17 GND
6 RX 12 GND 18 ACT-/SPIN
8. RS232 type COM(For Resistive Touch)
Pin Signal
1 UR
2 LR
3 SG
4 UL
5 LL
RA: Bitte alle Tabellen typografisch sauber
3. Pin Denition

9
8 | 73
Pin Definition
3
Mini PCI-E
9. Battery
Pin
Signal
Pin
Signal
1
VRTC
2
GND
10. LPT (J7)
Pin
Signal
Pin
Signal
Pin
Signal
1
STB#
8
SLIN#
15
PD6
2
AFD#
9
PD3
16
GND
3
PD0
10
BUSY
17
PD7
4
ERR#
11
PD4
18
GND
5
PD1
12
PE
19
ACK#
6
INIT#
13
PD5
20
GND
Pin Signal Pin Signal Key
1 Wake# 9 GND Pin Signal Pin Signal
2 +3.3V 10 RSVD 17 RSVD 35 GND
3 RSVD 11 REFCLK- 18 GND 36 USB D-
4 GND 12 RSVD 19 RSVD 37 RSVD
5 RSVD 13 REFCLK+ 20 W_Disable# 38 USB D+
6 1.5V 14 RSVD 21 GND 39 RSVD
7 CLKREQ# 15 GND 22 PERST# 40 GND
8 RSVD 16 RSVD 23 PER_ND 41 RSVD
24 +3.3V_AUX 42 LED_WWAN#
25 PER_PD 43 RSVD
26 GND 44 LED_WLAN#
27 GND 45 RSVD
28 1.5V 46 LED_WPAN#
29 GND 47 RSVD
30 SMB_CLK 48 1.5V
31 PET_ND 49 RSVD
32 SMB_DATA 50 GND
33 PET_PD 51 RSVD
34 GND 52 3.3V
8 | 73
Pin Definition
3
Mini PCI-E
9. Battery
Pin Signal Pin Signal
1 VRTC 2 GND
10. LPT (J7)
Pin Signal Pin Signal Pin Signal
1 STB# 8 SLIN# 15 PD6
2 AFD# 9 PD3 16 GND
3 PD0 10 BUSY 17 PD7
4 ERR# 11 PD4 18 GND
5 PD1 12 PE 19 ACK#
6 INIT# 13 PD5 20 GND
Pin
Signal
Pin
Signal
Key
1
Wake#
9
GND
Pin
Signal
Pin
Signal
2
+3.3V
10
RSVD
17
RSVD
35
GND
3
RSVD
11
REFCLK-
18
GND
36
USB D-
4
GND
12
RSVD
19
RSVD
37
RSVD
5
RSVD
13
REFCLK+
20
W_Disable#
38
USB D+
6
1.5V
14
RSVD
21
GND
39
RSVD
7
CLKREQ#
15
GND
22
PERST#
40
GND
8
RSVD
16
RSVD
23
PER_ND
41
RSVD
24
+3.3V_AUX
42
LED_WWAN#
25
PER_PD
43
RSVD
26
GND
44
LED_WLAN#
27
GND
45
RSVD
28
1.5V
46
LED_WPAN#
29
GND
47
RSVD
30
SMB_CLK
48
1.5V
31
PET_ND
49
RSVD
32
SMB_DATA
50
GND
33
PET_PD
51
RSVD
34
GND
52
3.3V
9 | 73
Pin Definition
3
7 PD2 14 SLCT
11. Line Out & Mic In (Audio CN8)
Pin
Signal
Pin
Signal
1
GND
6
Line_Out L
2
MIC_Th_L
7
AMP-L
3
MIC_Th_R
8
AMP-R
4
GND
9
Line_Out R
5
GND
10
GND
12. Speaker (CN5)
Pin
Signal
1
L+
2
L-
3
R+
4
R-
13. LCD Panel (LVDS)
LVDS connector
Back light(Inverter)
Pin
Signal
Pin
Signal
Pin
Signal
1
GND
11
GND
1
12V
2
GND
12
LVDS_TX1_DP
2
Ground
3
NC
13
LVDS_TX1_DN
3
No connect
4
NC
14
GND
4
Back light control
5
GND
15
LVDS_TX0_DP
5
Back light enable
6
LVDS_CLK_DP
16
LVDS_TX0_DN
7
LVDS_CLK_DN
17
GND
8
GND
18
GND
9
LVDS_TX2_DP
19
LCD_VDD
10
LVDS_TX2_DN
20
LCD_VDD
3. Pin Denition

10
9 | 73
Pin Definition
3
7
PD2
14
SLCT
11. Line Out & Mic In (Audio CN8)
Pin Signal Pin Signal
1 GND 6 Line_Out L
2 MIC_Th_L 7 AMP-L
3 MIC_Th_R 8 AMP-R
4 GND 9 Line_Out R
5 GND 10 GND
12. Speaker (CN5)
Pin Signal
1 L+
2 L-
3 R+
4 R-
13. LCD Panel (LVDS)
LVDS connector Back light(Inverter)
Pin Signal Pin Signal Pin Signal
1 GND 11 GND 1 12V
2 GND 12 LVDS_TX1_DP 2 Ground
3 NC 13 LVDS_TX1_DN 3 No connect
4 NC 14 GND 4 Back light control
5 GND 15 LVDS_TX0_DP 5 Back light enable
6 LVDS_CLK_DP 16 LVDS_TX0_DN
7 LVDS_CLK_DN 17 GND
8 GND 18 GND
9 LVDS_TX2_DP 19 LCD_VDD
10 LVDS_TX2_DN 20 LCD_VDD
3. Pin Denition

11
10 | 73
Rear I/O Interface
4
1. COM Port
Pin Signal Pin Signal Pin Signal
1 DCD 4 DTR 7 RTS
2 RXD 5 Ground 8 CTS
3 TXD 6 DSR 9 5V/12V/Ring
**COM1 and COM2 Pin9 function selection by BIOS Item
2. Cash Drawer(COM 6)
Pin Signal Pin Signal Pin Signal
1 Ground 3 Open/close detection
switch on drawer 5 NC
2
Drawer kick-out
driver signal
4 +12VDC for drawer
kick-out supplied 6 Ground
3. VGA
Pin Signal Pin Signal Pin Signal Pin Signal
1 Red 5 GND 9 5V 13 HSYNC
2 Green 6 GND 10 GND 14 VSYNC
3 Blue 7 GND 11 NC 15 DDC_CLK
4 NC 8 GND 12 DDC_DAT
4. PS/2
Pin Signal Pin Signal
1 K/B Data 4 VCC
2 Mouse Data 5 K/B Clock
3 GND 6 Mouse Clock
5. DC Jack
Pin Signal
1 19V
2 GND
3 19V
6. 2 layer USB Port
Pin Signal Pin Signal
1 5V 3 D+
2 D- 4 GND
Example DOS COMMAND for
Cash Drawer:
1. Create the file: TEST.TXT
2. Input below contents in TEST.TXT
CONTEXT-"000.0”
MODE COM6:300
3. Run COMMAND under DOS mode
COPY TEST.TXT COM6
Example DOS COMMAND for Cash Drawer:
1. Create the le: TEST.TXT
2. Input below contents in TEST.TXT
CONTEXT-"000.0”
MODE COM6:300
3. Run COMMAND under DOS mode
COPY TEST.TXT COM6
4. Rear I/O Interface

12
11 | 73
Rear I/O Interface
4
7. Giga LAN
8. RJ45 type COM3
Pin Signal Pin Signal 5V/12V Jumper selection (JP1)
1 5V/12V 5 RTS Pin Signal
2 DSR 6 CTS 1 5V
3 Ground 7 TXD 2 NRI#A
4 DTR 8 RXD 3 NC
4 NRI#A
5 12V
Jumper for COM3 Voltage setting
4444JP1
99998
1
JP1
1-2 5V
4-5 12V
9. PS/2 MSR Switch
Sliding both buttons toward the same side.
ON
12
Only K/B
V
X
Only MSR
X
V
V7Function
K/B + MSR
X
V
X: Forbidden
Pin Signal Pin Signal Pin Signal
1 VCC 6 MDI2+ L1 LED1(Green +, Orange -)
2 MDI0+ 7 MDI2- L2 LED1(Green -, Orange +)
3 MDI0- 8 MDI3+ L3 LED2(Yellow +)
4 MDI1+ 9 MDI3- L4 LED2(Yellow -)
5 MDI1- 10 GND
** LED1 : Link signal ** LED2 : Action signal
NOTICE:
COM 3 port. Warning!! COM3 (RJ45 Connector) for external VFD use only. Never
use on network device. If you are using on the network device will cause the
device damaged.
COM 3 port will be inactive if POS has internal VFD. (Alternative of COM 3 or
internal VFD)
K/B
MSR
11 | 73
Rear I/O Interface
4
7. Giga LAN
8. RJ45 type COM3
Pin
Signal
Pin
Signal
5V/12V Jumper selection (JP1)
1
5V/12V
5
RTS
Pin
Signal
2
DSR
6
CTS
1
5V
3
Ground
7
TXD
2
NRI#A
4
DTR
8
RXD
3
NC
4
NRI#A
5
12V
Jumper for COM3 Voltage setting
4
4
4
4
JP1
9
9
9
9
8
1
JP1
1-2
5V
4-5
12V
9. PS/2 MSR Switch
Sliding both buttons toward the same side.
ON
12
Only K/B
V
X
Only MSR
X
V
V
7
Function
K/B + MSR
X
V
X: Forbidden
Pin
Signal
Pin
Signal
Pin
Signal
1
VCC
6
MDI2+
L1
LED1(Green +, Orange -)
2
MDI0+
7
MDI2-
L2
LED1(Green -, Orange +)
3
MDI0-
8
MDI3+
L3
LED2(Yellow +)
4
MDI1+
9
MDI3-
L4
LED2(Yellow -)
5
MDI1-
10
GND
** LED1 : Link signal
** LED2 : Action signal
NOTICE:
COM 3 port. Warning!! COM3 (RJ45 Connector) for external VFD use only. Never
use on network device. If you are using on the network device will cause the
device damaged.
COM 3 port will be inactive if POS has internal VFD. (Alternative of COM 3 or
internal VFD)
K/B
MSR
Notice:
■ COM 3 port. Warning!! COM3 (RJ45 Connector) for external VFD use only. Never
use on network device. If you are using on the network device will cause the
device damaged.
■ COM 3 port will be inactive if POS has internal VFD.
(Alternative of COM 3 or internal VFD).
4. Rear I/O Interface
▪Sliding both buttons toward the same side.
ON 12
Only K/B VX
Only MSR X V
K/B + MSR X V
V: Function
X: Forbidden

13
5. System Assembly & Disassembly
5-1 HDD
12 | 73
System Assembly & Disassembly
5
5-1 HDD
1. Put the HDD on the
HDD bracket
(67D200418-000B)
2. Fasten the 4 M3 screws
(64D030044-100B)
3. Unscrew 2 M3 screws
(64D030060-200T)
4. Unscrew the HDD cover
5. Fabricate HDD
W/bracket in HDD
holder
6. Fasten the 2 M3 screws
(64D030044-100B)
7. Fasten the 2 M3 screws
2
HDD bracket
67D200418-000B
1
3
4 5
6 7
1. Put the HDD on the HDD
bracket (67D200418-000B).
2. Fasten the 4 M3 screws
(64D030044-100B).
3. Unscrew 2 M3 screws
(64D030060-200T).
4. Unscrew the HDD cover.
5. Fabricate HDD W/bracket in
HDD holder.
6. Fasten the 2 M3 screws
(64D030044-100B).
7. Fasten the 2 M3 screws.

14
5. System Assembly & Disassembly
5-2 RAM
13 | 73
System Assembly & Disassembly
5
5-2 RAM
1. Unscrew 2 M3 screws
(64DA30104-100B) and
remove MSR
2. Unscrew 4 M4 screws
(64D040081-100B) and
remove the stand.
3. Unscrew 6 M4 screws
(64D030060-200T) and
remove the panel back
4. Remove the scanner cable
5. Unscrew 1 M3 screws
(64D730041-100B)
6. Remove RAM door and
install the RAM
7. Put the RAM door back.
3
6
7
5
2 4
1
1. Unscrew 2 M3 screws
(64DA30104-100B) and
remove MSR.
2. Unscrew 4 M4 screws
(64D040081-100B) and
remove the stand.
3. Unscrew 6 M4 screws
(64D030060-200T) and
remove the panel back.
4. Remove the scanner cable.
5. Unscrew 1 M3 screws
(64D730041-100B).
6. Remove RAM door and install
the RAM.
7. Put the RAM door back.