Glasdon SHERWOOD Manual

SHERWOODTM LITTER BIN
1
To Secure a Sack in Position
(Sack Retention Model)
Operator Instruction Leaet
To Remove and Replace Hood (Sack Retention or Solid Liner Model)
IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE
With the key held in
place, twist the Hood
anti-clockwise
Once twisted, lift the
hood upwards to remove
1.
4. 5. 6.
7. 8.
2. 3.
Insert key into keyhole,
located at the side of the
bin
When replacing the hood,
ensure the xtures are
aligned with the apertures
on the bin, as shown
When hood is seated, twist
clockwise to lock back into
position
Pull the sack bands
upwards
Pull the sack up from
within the bin, and wrap
over the sack bands
Push the sack bands
back down to secure the
sack
9 .
Use the handles on the Liner
rim to lift the Liner from, or
lower it back into, the bin
To Remove and Replace
Solid Liner

SHERWOODTM LITTER BIN
2
10.
13.
11. 12.
To Remove and Replace Locking Liner
Use the handles on the
Liner rim to lift the Liner
from, or lower it back
into, the bin
Take hold of the Liner
using the handles on the
Liner rim
Replace the Liner and
twist clockwise fully to
lock in position
Twist the Liner anti-clock-
wise to unlock it from the
base of the bin
Glasdon U.K. Limited
Preston New Road
BLACKPOOL
Lancashire FY4 4UL
Tel: [phone]
Fax: [phone]
email: [email protected]
web: www.glasdon.com
AND SHERWOOD LITTER BIN ARE TRADEMARKS OF GLASDON GROUP OR ITS
SUBSIDIARIES IN THE U.K. AND OTHER COUNTRIES
• A planned maintenance schedule of regular inspection is recommended, replacing
components as necessary.
• Replacement components are available direct from GLASDON UK LIMITED.
• GLASDON UK LIMITED cannot be held responsible for claims arising from incorrect
installation, unauthorised modifications or misuse of the product.
Issue 1 December 2012 C000/0431
© Copyright 2012
Glasdon UK Ltd reserve the right to alter specifications without prior notice.