manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Glasdon
  6. •
  7. Other
  8. •
  9. Glasdon EDGEMASTER 20 User manual

Glasdon EDGEMASTER 20 User manual

Popular Other manuals by other brands

Opticon EduMic Compatibility guide

Opticon

Opticon EduMic Compatibility guide

Kessil A360W owner's manual

Kessil

Kessil A360W owner's manual

TEFAL ULTRA COMPACT MIXER manual

TEFAL

TEFAL ULTRA COMPACT MIXER manual

Martin Audio WS18X - SCHEMATICS manual

Martin Audio

Martin Audio WS18X - SCHEMATICS manual

Hendrickson AR2 series Service instructions

Hendrickson

Hendrickson AR2 series Service instructions

GO Industries 38017 installation instructions

GO Industries

GO Industries 38017 installation instructions

Cissell 30LBCMAN2 manual

Cissell

Cissell 30LBCMAN2 manual

RIDGID K-60SP manual

RIDGID

RIDGID K-60SP manual

Gage Bilt GB751SH-5 Original instructions

Gage Bilt

Gage Bilt GB751SH-5 Original instructions

OVE SIERRA 60 installation manual

OVE

OVE SIERRA 60 installation manual

ReelCraft 7800 OLB21 operating instructions

ReelCraft

ReelCraft 7800 OLB21 operating instructions

Body Armor 4x4 ECO-SERIES user manual

Body Armor 4x4

Body Armor 4x4 ECO-SERIES user manual

ROBLIN DROP Dimensions

ROBLIN

ROBLIN DROP Dimensions

EMG EMG-ACB BARREL Installation information

EMG

EMG EMG-ACB BARREL Installation information

MiniSolar MT-150 Assembling Guide

MiniSolar

MiniSolar MT-150 Assembling Guide

Parkside PSZ 250 B2 Operation and safety notes

Parkside

Parkside PSZ 250 B2 Operation and safety notes

ABB REM 610 Technical reference manual

ABB

ABB REM 610 Technical reference manual

Tyent ACE-13 user manual

Tyent

Tyent ACE-13 user manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

6
EDGEMASTER 20 INSTALLATION INSTRUCTIONS
BACK FILL INSTRUCTIONS
EQUIPMENT REQUIRED (BACK FILL):
-Spade
-Spirit Level
Please note that diagrams are not to scale
G
R
O
U
N
D
L
E
V
E
L
GROUND LEVEL
Soil
Remove any
top dress-
ing (turf
etc) if
required
and dig a
hole to a
depth of
310mm and
a diameter
of approx.
250mm.
If using an
optional
ground tube
rstly insert
this through
the hole in
the base of
the post as
shown.
Backll the
hole with
soil ensur-
ing the
marker is
vertically
level using
a spirit
level.
Tamp the
marker in
place
(remove/
rell soil as
required to
ensure the
ground level
mark is at
the correct
height).
If required
replace the
turf/ bark/ top
dressing as
appropriate.
4
3
2
GROUND LEVEL
Spirit
Level
GROUND LEVEL
Soil
For the majority of applications we recommend
installing the Edgemaster by backlling and for
applications where extra stabilty is required we
recommend using the Ground Tube.
However for areas were soil quality is particularly
poor the Edgemaster can be installed using a dry
concrete mix, please see overleaf for instructions.
310mm
250mm
1
7
GROUND LEVEL
Concrete
Mix
Soil
EDGEMASTER 20 INSTALLATION INSTRUCTIONS
CONCRETE INSTRUCTIONS
Follow the same instructions for Backlling
however at Step 3 rell the hole using a
concrete mix and allow the concrete to set
before replacing any top dressing.
310mm
250mm
AND EDGEMASTER ARE TRADEMARKS OR REGISTERED TRADEMARKS OF
GLASDON GROUP OR ITS SUBSIDIARIES IN THE U.K AND OTHER COUNTRIES
• A planned maintenance schedule or regular inspection is recommended, replacing
components as necessary.
• Replacement components are available direct from GLASDON.
• GLASDON cannot be held responsible for claims arising from incorrect installation,
unauthorised modifications or misuse of the product.
Issue 1 June 2008 Stock no. C000/0338
© Copyright 200
Glasdon UK Ltd reserve the right to alter specifications without prior notice.
Glasdon U.K Limited
Preston New Road
BLACKPOOL
Lancashire FY4 4UL
Tel: 01253 600410
Fax: 01253 792558
email: [email protected]
web: www.glasdon.com
IMPORTANT NOTE: PLEASE ENSURE THAT ALL RELEVANT PERSONNEL READ THE POINTS LISTED
WITHIN THIS LEAFLET AND THAT A COPY IS GIVEN TO STAFF INVOLVED WITH THE INSTALLATION AND
MAINTENANCE OF THIS PRODUCT.
SAFETY NOTE: PLEASE REFER TO ‘THE MANUAL HANDLING OPERATIONS REGULATIONS 1992’
DURING HANDLING.
EQUIPMENT REQUIRED:
-Spade
-Spirit Level
-Concrete Mix (we would strongly recom-
mend using a dry mix concrete as a wet
concrete may cause the post to rise when
drying).
Please note that diagrams are not to scale