Glastender SWA-12 User manual

Printed in USA
Specications subject to change without notice. For current specications please visit our website.
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com
Approval/Notes:
Project:
Item #: Qty:
Model #:
AIA#
SIS#
A family company manufacturing in the USA
www.glastender.com
Wet Waste Sinks
SWB-12
Rev. 04-08-19
SW
Standard Features
Specications
SWA-12, SWA-18, SWB-12, SWB-18
• Manufactured with total welded construction to meet NSF®
standards
• All stainless steel construction
• One-piece seamless top and backsplash featuring 1/4″ radius
corners for easy cleaning
• Adjustable stainless steel bullet feet
• 9-1/4″by 11-1/2″by 6″deep sink bowl with hot and cold
water faucet
• Faucets are standard and ship mounted
• Includes a lift-out perforated plastic wet waste strainer
Drain
• 1-1/2″I.P.S. Threaded drain will fit Dearborn part
#8033 slipnut and part #W-573P washer
Faucet
• Deck mount on 4″centers, accepts 3/8″sink leads,
hot and cold water connections required (excluding
Model SWA-12)
• Model SWA-12: Backsplash mounted on 4″centers,
accepts 3/8″sink leads, hot and cold water connec-
tions required
• NSF/ANSI 61, 372 low lead compliant
All faucets are NSF/ANSI 61, Annex G
low lead compliant
To view underbar installation instructions, please visit:
https://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf
To view cleaning and care instructions, please visit:
https://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
4004503
Conforms to ANSI/NSF STD 2
Certied to CSA/CAN STD B45.4
!
WARNING: The plastic wet waste strainer included with this product
can expose you to chemicals including Bisphenol A (BPA), which is known
to the State of California to cause birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
Warning applies to State of California only. Part #03000483
Sink Bowl Dimensions
• 9-1/4″by 11-1/2″by 6″deep
Legs
• 1-5/8″diameter, 16 gauge stainless steel
• Stainless steel bullet feet
Materials
• 20 gauge stainless steel parts include: all components unless
otherwise noted

Dimensional Information
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com Printed in USA
24"
BACKSPLASH
30"
16"
37"
7"
18"
19"
24"
18"
FRONT RAIL
DRAIN
19"
12"
24"
12"
16"
30"
7"
37"
19"
BACKSPLASH
Wet Waste Sinks
PLAN VIEWS
SIDE ELEVATIONS
“A” DEPTH SIDE ELEVATION
(12" wide unit shown with backsplash mounted
faucet. 18" wide units have deck mounted faucet.)
“B” DEPTH SIDE ELEVATION
SWA-12 SWA-18
SWB-18SWB-12