Gledopto GL-C-009P User manual

Button reset
Product Parameter
Input Voltage DC12-24-36-48-54 V
Size 23.5x48x89mm
Model NO.
Product Name
GL-C-009P
LED Dimmer Controller Pro
Protection Rate IP20
Total Power 270 W Max
Total Output Current 10 A Max
Output Current/Channel 5 A Max
Operating Temperature -20℃~60℃
P1
P2
P3
.
LED Dimmer Controller Pro
Model NO.: GL-C-009P
Input Voltage: DC12-24-36-48-54V
Total Power: 270 W Max.
Output Current/Channel: 5A Max.
Total Output Current: 10A Max.
Operating Temperature: -20 to+60
Common Anode / Constant Voltage
Reset

GL-CP-I-001

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.