Soup Take 4 cups of soup stock in a pan. Select the soup function. The power
and temperature is set to 1200W and 180°C respectively. The default set time
is 120 minutes, however it can be adjusted from 60 minutes to 239 minutes as
desired. After the set time, the cooker switches to keep warm status for the next
two hours.
Porridge Take one cup roasted porridge. Put it in the pan with 7 cups of water.
Switch on the power. Press the Porridge function. The default time will show
as 60 minutes. It can be adjusted between 30 minutes and 239 minutes as
desired. The temperature is set to 180°C and power at 1200W. After the set
time, the cooker switches to keep warm status for the next two hours.
Steam This function is used to steam vegetables. Switch on the cooker. Select
the steam function. The cooking starts at 2000W, 280°C. After 5 minutes it is
turned automatically to 1200W, 180°C (Normally it takes 5 minutes to boil 1
litre of water). The default time is 25 minutes, it can be adjusted from
minimum 10 minutes to maximum 239 minutes.
Stir Fry This is a function designed for cooking of vegetables etc. The default
power and temperature is 2000W & 280°C. During cooking the power
temperature and time can be adjusted as required. The timer can be adjusted
anywhere from 60 minutes to 599 minutes.
Hot Pot This function is designed to boil water. During heating, you can adjust
the temperature and time as per your requirement. The default power and
temperature is 1200W & 180°C. The timer can be adjusted anywhere from 60
minutes to 599 minutes. In case of abnormally high heat, the cooker switches
to standby mode and starts re-heating after cooling down.
This is the default function and is selected automatically when the cooker is
switched ON, or if no other function is selected.
Note : The results may vary depending on the power supply, quality of
ingredients and the amount of water.
Timer The cooking can be set to a desired time with the help of the timer.
Press the timer button, and adjust the display to set the time with the help of (+)
and (-) buttons.
Once set the display would flash the set time and then begin the countdown.
After the set time elapses the cooker will automatically switch to keep warm
status.
Heat Adjustment The cooker automatically sets to the required temperature
in case of pre-set functions. However it is possible to manually adjust it as per
requirement in case of Hot-Pot and Stir Fry functions.
0 0
The temperature can be set manually (from 60 C to 280 C) using the (+) and (-)
buttons. The set temperature is displayed on the digital screen.
