
Global Caché
e 3 IR ports on the Tri-port cable can be used
as 3 IR emitters or 2 emitters and 1 Flex Link
Blaster cable (on IR3).To use IR3 with a Flex
Link Blaster cable, change “Blaster Connected
on IR3” from False to Tr ue. en select Save
Changes to apply the new settings.
Troubleshooting.
See the iTach Flex Quick
Starts or visit our website for more information
on conguring Flex devices.
*To download the iHelp
www.globalcache.com/downloads. Run iHelp
on a Windows PC that is connected to your
network. iHelp listens for Global Caché multi-
cast beacons and displays the iTach IP address
and other details within one minute.
Global Caché, Inc.
160 East California Street
PO Box 1659
Jacksonville, Oregon 97530
Phone (541) 899-4800 - Fax (541) 899-4808
Copyright ©2013 Global Caché, Inc. All rights reserved.
PN: 022213-02 ver.2 Information subject to change without notice.
This device complies with Part 15 of FCC rules and with
ICES-003 of Industry Canada. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference
Made in the U.S.A.
Quickstart_FLCtriport_1up_062713.indd 2 7/1/2013 1:31:56 PM