Global Industrial 604153 User manual

- 1 -
IMPORTANT INSTRUCTIONS
Note: When using electrical appliances, please follow these basic precautions to reduce
the risk of fire, electric shock, and /or injury/damage to persons or property.
1 Always operate the product from a power source of the same voltage, frequency and
rating as indicated on the product identification plate.
2 Close supervision is necessary when any product is used by or near children the
elderly or the infirm. Do not allow children to use the appliance as a toy.
3 Do not operate any product with a damaged power cord or plug, after the product
malfunctions, dropped or damaged in any way. Return the complete product to the
place of purchase for inspection, repair or replacement.
4 Switch off and unplug from the power socket when not in use, before assembling or
before cleaning.
5 Do not operate in standing water.
6 Keep wiring and motor dry. If electrical components become wet, allow them to dry
completely before using.
7 Unit must be electrically grounded. Insert 3-prong plug on power cord directly into
matching grounded receptacle.
8 Never use a water hose or pressure washer to clean electrical components;
water could enter the electrical compartment causing a shock hazard.
Air Scrubber
SAVE FOR FUTURE REFERENCE
TECHNICAL SPECIFICATION
Supply Voltage
115V/60Hz
Rated power
420W/3.6A
Process Air(CFM)
MAX 3300
MERV-9 Pre-Filter(inch)
14x20x1
MERV-16 HEPA Filter(inch)
14x20x2
Unit Size(inch)
23.9x23.9x43.3
Net Weight(Ibs)
150
Variable Speed
Yes
Caster(inch)
4
Power(ft)
25
Please read all instructions
before using unit
WARNING
PRODUCT IDENTIFICATION
Air inlet
(total 4pcs)
Air outlet (Fits 20 in. Ducting.)
Remarks: The ducting is not included in the air
scrubber, available from your distributor.)
Control panel
Power cord
User's manual
Customer Service
US:1-800-645-2986
Manual del usuario
Servicio de atención al Cliente
US: 1-800-645-2986
Manuel de l'utilisateur
Service à la clientèle
Canada: 888-645-2986
Caster
(total 4pcs)
Handle
(total 2pcs)
Buckle
(total 8pcs)
Model: 604153

- 2 -
GENERAL INFORMATION OPERATION
The air scrubber is a portable filtration system that draws
air in from the surrounding environment and passes it
through an advanced filtration system. The unit
removes airborne particles like dust, mold spores, pollen,
pet dander and miscellaneous debris.
It uses an efficient mix of airflow and filtration to create
"cleaner” air. Uses 4pcs pre-filter and 4pcs HEPA filter.
The first stage of filtration captures larger particles,
the second stage of filtration captures much smaller
particles down to 0.3 microns and larger, such as mold
spores and fungi.
FILTER MAINTENANCE
The air scrubber utilizes 2-stage filtration system designed
with the most advanced HEPA filtration technology available.
Please replace HEPA filter when the change filter indicator
light comes on.
Inspect pre-filter before each use. Look for accumulated
dust and dirt that could restrict airflow through the filter
into the unit. If any is visible,replace out the pre-filter.
For environments with a high volume of aerosolized
particles, you can often replace dirt pre-filter to extend the
life of the HEPA filter.
Replace filter procedures should be performed as follows:
1. loosen the buckle, then open the door.
2. Remove used dirty filters and replace.
CONTROL PANEL
VARIABLE SPEED:
It control fan motor speed and
unit ON/OFF.
CHANGE HEPA FILTER:
The change light illuminates when you
need to change the HEPA filter.
CIRCUIT BREAKER:
The primary purpose of the circuit
breaker is to protect the machine. It
turns the unit off when more than
12 amps run through the on-unit circuit.
Ground Fault Circuit Interrupter (GFCI):
The GFCI helps protect the user should it detect a sudden
“ground fault”, the GFCI will interrupt the electric current.
The GFCI will also trip when a short circuit or an overload
occurs.When the GFCI “trips”, unplug the unit, and look for
potential hazards standing water, frayed cords, etc. anything
that would cause a surge of electrical current.
Relocate the unit and plug it into a different outlet. Then push
the “reset” button, and check to see if it’s operating; if so,
continue use, if not contact your local distributor.
Daisy-chain Capability
Our designed the air scrubber for optimal versatility.
You can interconnect up to three units,
Link up to 3 units on 1 power outlet.
TROUBLE SHOOTING
FAULT
CAUSE
SOLUTION
Unit does
not
operate
• No power to machine
• Switch not turned on
• No power to outlet
• GFCI Tripped
• Plug in the unit;
check power at outlet
• Turn on the switch
• Reset circuit
breaker/GFCI
Change
light
illuminated
• Primary filter is full
• Air intake restricted
• Replace the filters;
Refer to Maintenance
section
• Eliminate
bends/kinks in
ducting, or remove
ducting
Blower
wheel not
turning
• Obstructed blower
• Loose wire
• Remove obstruction
• Inspecting circuits
WARNING:
DO NOT attempt to rectify faults using unqualified personnel.If
the problem you are experiencing is not listed here, contact
customer service.
Pre-filter HEPA filter
Buckle