Global ZIRA PC Center Installation instructions

1 TOP 1 1 1 1 1 1 1 1 PARTICLEBOARD
2 SIDE 2 2 2 2 2 2 2 2 PARTICLEBOARD
3 BACK 1 1 1 1 1 1 1 1 PARTICLEBOARD
4 BOTTOM 1 1 1 1 1 1 1 1 PARTICLEBOARD
5 SHELF 2 2 2 2 PARTICLEBOARD
6 KICKBASE 1 1 1 1 1 1 1 1 PARTICLEBOARD
7 CORNER BRACKET W/LEVELER 4 4 4 4 4 4 4 4 STEEL
8 VERTICAL DRAWER W/SHELVES 1 1 1 1 PARTICLEBOARD
9 VERTICAL DRAWER FRONT 1 1 1 1 PARTICLEBOARD
10 HANDLES 1 1 1 1 ALUMIIUM
11 DRAWER LOCK MECHANISM 1 1 1 1 STEEL
12 SIDE DRAWER COVER 1 1 1 1 PARTICLEBOARD
13 TOP DRAWER COVER 1 1 1 1 PARTICLEBOARD
14 KEYBOARD SHELF 1 1 1 1 1 1 1 1 PARTICLEBOARD
15 PC/PRINTER SHELF 1 1 1 1 1 1 1 1 PARTICLEBOARD
16 SCREWS/BOLTS 65 65 79 86 115 115 128 134 STEEL
29”ht 41”ht 71.5”ht 84”ht
29”ht 41”ht 71.5”ht 84”ht 29”ht 41”ht 71.5”ht 84”ht
29”ht 41”ht 71.5”ht 84”ht
ITEM DESCRIPTION QUANTITIES MATERIAL
Disassembly Instructions
Pc Center
Media Center
ZIRA
Safety Glasses
Rubber Mallet
PHILLIPS
Screwdriver size #2
WRENCH
Size #16 or 5/8”
TOOLS REQUIRED
AFor Media Center : Remove Drawer by Fully Extending
and Disengaging latch on each slide while pulling drawer
out.
BFor Media Center :On Drawer boxes, unscrew and remove
slide channels, handles and door lock mechanism. Untighten
Minix and Unscrew and remove, Shelves , side and back.
CRemove PC/Printer Shelf by Fully Extending and
Disengaging latch on each slide while pulling shelf out.
Remove Keyboard Shelf by Fully Extending, tilt the shelf and
pull straight out.
DOn PC/Printer Shelf, unscrew and remove slide channels,
Untighten MiniFix Cam, release metal bar and remove plastic
caps.On keyboard Shelf, unscrew and remove slide
channels.
ETurn unit. Pull kickbase and unscrew kick base connector.
Unscrew and remove corner brackets with leveler.
FUntighten Minix Cam on top Drawer Cover. Unscrew
remove side Drawer Cover.
GOn Side Drawer Cover, unscrew and remove slide
channels.
HUntighten Blum and Rax Connectors.
IUnscrew Blum and Rax Bolts. Unscrew and remove
glide channels.
STEPS
NOTE: Any alterations to listed components will void the manufacturer’s warranty. The manufacturer will not be responsible for any damage or bodily harm caused by alterations in accordance with national or local
electrical codes and manufacturer’s specications. In accordance with the manufacturer’s policy of continual product improvement, the product presented in this document is subject to change without notice or obligation.
ZDIS
25 rev: 00
ZDIS 25 Rev.00 Pg 1 of 4
Printed in Canada
Z30...36L8PC
Z30...36M8PC
Z30...36S8PC
Z30...36L8MC L/R
Z30...36M8MC L/R
Z30...36S8MC L/R
Z30...36L7PC
Z30...36M7PC
Z30...36S7PC
Z30...36L7MC L/R
Z30...36M7MC L/R
Z30...36S7MC L/R
Z30...36L4PC
Z30...36M4PC
Z30...36S4PC
Z30...36L4MC L/R
Z30...36M4MC L/R
Z30...36S4MC L/R
Z30...36L2PC
Z30...36M2PC
Z30...36S2PC
Z30...36L2MC L/R
Z30...36M2MC L/R
Z30...36S2MC L/R
1
2
2
12
3
5
4
7
12
13 11
9
10
14
15
68
ALLEN KEY
Size #5
PC Center Media Center
Please contact Global Customer Care at 905-660-5101 for any questions or concerns.

E
FG
H
Rafix Connector
Rafix Connector
Blum Connector
ZDIS 25 Rev.00 Pg 3 of 4
Printed in Canada
FOR SAFETY :TWO
PEOPLE REQUIRED
FOR THIS STEP
Minifix Cam

ZDIS 25 Rev.00 Pg 2 of 4
Printed in Canada
A
CD
File Drawers
B
Minifix Cam
PC/Printer Shelf
Minifix Cam

I
Blum Bolt
Rafix Bolt
ZDIS 25 Rev.00 Pg 4 of 4
Printed in Canada